Lindy 70538 - Manual
Lindy 70538 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – RAID - Redundant Array of Independent Disks
- Page 4 – RAID BIOS Installation
- Page 6 – Software Installation
- Page 7 – Verifying The installation under Windows 2000 and XP
- Page 11 – Verifying The installation under Windows 98SE and ME
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (November 2004)
SATA Raid+USB2.0
+1394a 9 port PCI Card
User Manual
English
LINDY No. 70538
www.LINDY.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
- 3 - Fully compliant with Serial ATA 1.0 specifications. Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes. Supports Spread Spectrum in receiver. Features Serial ATA to PCI interrupt masking. Features W atch Dog Timer for fault resiliency. 1.1.3. USB Int...
- 4 - Disk Striping (RAID 0) Striping is a performance-oriented, non-redundant data mapping technique. W hile Striping is discussed as a RAID Set type, it is actually does not provide fault tolerance. W ith modern SATA bus mastering technology, multiple I/O operations can be done in parallel, enhanc...
- 6 - to function properly, this old metadata must be first overwritten with the new metadata. To resolve this, select Resolve Conflicts , and the correct metadata, including the correct drive connection information, will be written to the replacement disk. 4. Software Installation 4.1. Windows 2000...
