Lindy 42807v0 - Manual

Lindy 42807v0

Lindy 42807v0 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
Page: / 12

Table of Contents:

  • Page 3 – Features
  • Page 5 – Place the hard drive into the drive tray and
  • Page 6 – or
  • Page 7 – This enclosure is designed to sit underneath your Mac Mini.; Initialize; application will launch:
  • Page 8 – type from the drop-down menu. If you want to use the; Name; button. A confirmation window will appear,; Erase
  • Page 9 – Using the enclosure with your PC; a new drive icon will show up in
  • Page 10 – Windows Me users; If it is a pre-formatted drive, no further action is required; Fdisk
  • Page 11 – Reorient or relocate the receiving antenna
  • Page 12 – Recycling Information
Loading the manual

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (August 2008)

Mini USB 2.0 & FireWire Enclosure

SATA & IDE


User Manual

English




















LINDY No. 42807


www.lindy.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Features

User Manual English 2 Introduction Thank you for purchasing the LINDY Mini USB 2.0 and FireWire Enclosure. This enclosure has been designed to complement and add extra storage capability to your Mac Mini. The small footprint design allows it to be seated underneath a Mac Mini, but with its USB 2.0 a...

Page 5 - Place the hard drive into the drive tray and

User Manual English 4 11. Place the hard drive into the drive tray and connect the Molex power and IDE data cables 7. Disconnect the SATA Data cable from the bridgeboard. Hold the base of the drive enclosure and pull the bridgeboard up to disconnect it. 8. Unscrew the four screws holding the drive t...

Page 6 - or

User Manual English 5 12. Use the supplied screws to secure both sides of the drive 14. Replace the 4 case screws and affix the two foam feet as illustrated 13. Carefully assemble the top and bottom of the case. If the upper case does not fit properly, adjust the hard disk position and try again 15....

Other Lindy Models

All Lindy Other