Page 2 - Ethernet Powerline Adaptor
Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise,...
Page 4 - Contents
Ethernet Powerline Adaptor iii Contents COPYRIGHT ...................................................................................................................................................... I CHAPTER 1 INTRODUCTION .............................................................................
Page 5 - Chapter 1 Introduction
Chapter 1 Introduction Congratulations on your purchase of this outstanding Ethernet Powerline Adaptor. This device is a 85Mbps Powerline Ethernet Adaptor which transforms your house’s existing electrical wiring into an ubiquitous networking infrastructure. Simply plug this 85Mbps Ethernet Powerline...
Page 6 - Homeplug Turbo
Ethernet Powerline Adaptor 2 1.1 Features Homeplug Turbo y High speed data transfer rate up to 85Mbps y Fully compatible to HomePlug 1.0 y Backward-compatible to HomePlug standard 1.0 y Works with AC input of 100V ~ 240V y Plug-and-Play configuration y High-speed HomePlug adapter with Ethernet int...
Page 8 - Chapter 2 Connecting Mechanism; hardware connection mechanism.
Chapter 2 Connecting Mechanism 2.1 Introduction The Ethernet Powerline Adaptor support up to 85Mbps data rate. With this high speed connection rate, this Ethernet Powerline Adaptor allows you to setup a high speed home network by using your home existing electrical wiring. Simply plug this Ethernet ...
Page 10 - Physical Interface; Interface Description; Ethernet
2.2 Physical Interface There are two physical interface on this Ethernet Powerline Adaptor. Interface Description Ethernet One 10/100Mbps Ethernet port connected to PC LAN card or broadband device. Power Plug Power Plug connected to any 100V ~ 240V AC power socket. Ethernet Powerline Adaptor 6
Page 11 - Hardware Connection – Computer; Power
2.3 Hardware Connection – Computer For those computers you wish to be networked by Ethernet Powerline Adaptor, each of the computer must be properly connected with an Ethernet Powerline Adaptor through an Ethernet (RJ-45) cable. Following are the steps to properly connect the Ethernet Powerline Adap...
Page 12 - Hardware Connection – Internet
2.4 Hardware Connection – Internet This section describe how to connect the Ethernet Powerline Adaptor into your existing ADSL broadband connection via ADSL Ethernet port. Follow the procedures describe below to connect the Ethernet Powerline Adaptor to your ADSL broadband connection: 1. Power off y...
Page 13 - Chapter 4 Installing Management Utility; on; “Management Utility”; to install the Management Utility.
Chapter 4 Installing Management Utility Please verify that no other Ethernet Powerline Adaptor or any Encryption Management Utilities are installed before installing the provided software. If other Homeplug Utilities are installed, uninstall them and restart your personal computer before installing ...
Page 14 - Step 4: After the installation, a shortcut to the; “Power Adaptor Utility”; application icon is provided on the
Step 2: The program installation process will carry out and automatically copying all the necessary files to your system. Step 3: The following screen will pop-up when the Power Adaptor Utility is successfully installed. Step 4: After the installation, a shortcut to the “Power Adaptor Utility” appli...
Page 15 - Chapter 5 Using The Management Utility; setting user defined secure powerline networks.; from your windows desktop, the following screen display.; “Main”; and; “About”
Chapter 5 Using The Management Utility After you’d successfully installed the Ethernet Powerline Adaptor hardware and Management Utility software, you can setup or configure the devices according to your need. This Ethernet Powerline Adaptor Configuration Utility enables the users to identify HomePl...
Page 17 - “ON”
Ethernet Powerline Adaptor 13 ; Autoscan: Shows the scanning status (Default is “ON” ). Device Name: Shows the default device name. One may redefine or change the name by clicking on the name and editing in place or by clicking the “Rename” button. Password: Shows the current password of the Eth...
Page 18 - “Rename”; tab
5.1.1 Rename This Management Utility allows you to change the name of the listed Ethernet Powerline Adaptor. Click and select the Ethernet Powerline Adaptor you wish to change from the list, then click on the “Rename” tab and editing-in-place to change the name. Ethernet Powerline Adaptor 14
Page 19 - Adaptor you wish to change from the list, then click on the; “Enter Password”; tab, the following screen; Password; (Take note to the password format) and click; “OK”; could not be located, a warning message will be shown.
5.1.2 Enter Password To set or change your Ethernet Powerline Adaptor’s password, click and select the Ethernet Powerline Adaptor you wish to change from the list, then click on the “Enter Password” tab, the following screen display. Enter your Password (Take note to the password format) and click “...
Page 22 - Set Local Device Only:; configuration; Set All Devices; button is used to change the logical network of all devices; Main
Ethernet Powerline Adaptor 18 ; Set Local Device Only: Click this tab to change the network name of the local Ethernet Powerline Adaptor device only. All Ethernet Powerline Adaptor devices seen on the Main configuration homepage prior to this will be no longer present in the new network, effectively...
Page 24 - Lower Panel
Ethernet Powerline Adaptor 20 The Lower Panel contains a history of all remote Ethernet Powerline Adaptor devices seen on the computer over a certain period of time. All devices that were on the powerline network are listed here along with a few other parameters. Ethernet Powerline Adaptor devices t...
Page 25 - The; About; homepage show the Management Utility software version.; configuration homepage.
5.4 About The About homepage show the Management Utility software version. ; AutoScan: When enabled (Place a check), the Management Utility will automatically scan for Ethernet Powerline Adaptor devices on the local network every few seconds and updated the scanning information on the Main configura...
Page 26 - Appendix A: Troubleshooting Guide; The Power LED does not light up.
Appendix A: Troubleshooting Guide The Troubleshooting Guide provides answers to common problems regarding the Ethernet Powerline Adaptor. 1. The Power LED does not light up. Ans. Check the following: 1. Make sure that the Ethernet Powerline Adaptor is properly plugged into a power outlet. 2. Make su...
