Lifespan Fitness LFTM-PURSUIT3 - User Manual

7 ASSEMBLY INSTRUCTIONS | IV. ASSEMBLY INSTRUCTIONS 1 No. Description Specification Qty 1 Main Frame 1 8 5#Allen Wrench 1 56 Bolt M8*42 2 67 Lock Washer 8 6 5# Allen Wrench 5mm 1PCWrench with screwdriver S=13/14/15 1PC FIXING TOOLS: Do not turn on machine until assembly is completed. NOTICE: 8 56 39...

10 V. FOLDING INSTRUCTIONS Pull up the base frame at position A, until you hear the sound that the air pressure bar B is locked into the round tube. FOLDING A B Support place A with hand, tap on the place of air pressure bar, then the main frame will slowing come down automatically. Please keep chil...

11 VI. OPERATION GUIDE SPEED: Display the speed. TIME: Display the time. DIST: Display the distance. CAL: Display the calories. PULSE: Display the heart rate. OPERATION GUIDE | OVERVIEW 1. WINDOW DISPLAY

17 VIII. MAINTENANCE INSTRUCTIONS Reasonable cleaning/lubricating should be made to extend the life time of this unit. Performance is maximized when the belt and mat are kept as clean as possible. WARNING: • The mat/deck friction may lay a major role in the function and life of your treadmill and th...

18 We recommend lubrication of the deck according to the following timetable: • Light use (less than 3 hours per week) every 6 months. • Medium use (3-5 hours a week) every 3 months. • Heavy use (more than 5 hours per week) every 6-8 weeks. See below procedures for lubricating: 1. Use a soft, dry cl...

19 C To adjust the tightness of the belt: Turn the treadmill off. Turn both the left and right adjusting bolts 1/4 turn clockwise. Repeat until the belt correctly tightens. See Picture C If the belt is over tightened, simply do the opposite to loosen. MAINTENANCE INSTRUCTIONS | Place treadmill on a ...

21 IX. REPLACING MOTOR BRUSHES After extended use, the motor brushes in your treadmill motor will wear down, and this can lead to motor failure. It is important that you maintain your motor by replacing the brushes on either side of the motor when they are worn down. We recommend that you check your...

26 | TROUBLE SHOOTING GUIDE XII. TROUBLE SHOOTING GUIDE Code Reason Solution E01 Software runs overload Turn off the switch and restart the machine. No. Description Specs Qty 63 Screw M6*60 3 64 Lock Washer M6 3 65 Screw M8*45 6 66 Lock Washer 10 2 67 Lock Washer 8 14 68 Standard Spring Washer 5 2 6...

29 XIV. HAND PULSE TECHNOLOGY This product comes equipped with hand pulse sensors which are used to pick up tiny EKG/ECG signals that run through the body when your heart beats. These electrical EKG/ECG signals are very small and must be amplified 1000 times to make the signal viable for the compute...