Life fitness SM21 - Manual
Life fitness SM21 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SM21 Unpacking & Assembly Instructions; COMPONENTS OF THE SM21 ARE LARGE AND HEAVY. USE CAUTION; MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY; Pinch bar; ASSEMBLY TIME; Two people can accomplish this assembly in approximately 1 hour.; UNPACKING; Follow the steps below when unpacking the components of the SM21.; Remove the parts box and shipping boards.
- Page 3 – ASSEMBLY; Figure 1 shows an assembled SM21.; Place the two weight “cells; ” in their final resting spots. The cells will be
- Page 4 – Bolt on the connecting beam; using a 5/8” socket with extension and combination
- Page 5 – Mount adjustable pulley brackets.; W hen shipped, the adjustable pulley brackets; Figure 5. Mount adjustable pulley bracket.
- Page 6 – ADJUSTABLE CROSSOVER CABLE ROUTING; NOTE: THE INFORMATION BELOW IS FOR REFERENCE ONLY. THE; Figure 6. Adjustable crossover cable routing.
- Page 7 – Figure 7. Adjustable crossover cable end detail.
- Page 8 – HARDWARE; Description; Main components
M051-K50-B122
1
2 STACK MULTI-JUNGLE (SM21)
WITH 2 ADJUSTABLE PULLEYS
UNPACKING AND ASSEMBLY INSTRUCTIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SM21 Unpacking & Assembly Instructions 2 The SM21 comes partially assembled. Follow the steps below to complete the assembly. WARNING: COMPONENTS OF THE SM21 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING THIS MACHINE. MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY 9/16”Socket wrench withextension ...
SM21 Unpacking & Assembly Instructions 3 ASSEMBLY Figure 1 shows an assembled SM21. Figure 1. SM21 main components (cables removed for clarity). 1. 1 stack cell (2)2. Connecting beam 1. Place the two weight “cells ” in their final resting spots. The cells will be approximately 11’4” apart as sho...
SM21 Unpacking & Assembly Instructions 4 Figure 2. Set the weight stack cells. 2. Bolt on the connecting beam using a 5/8” socket with extension and combination wrench, to the cells using the four 7/16” x 6” bolts, 7/16” washers, and 7/16” nuts,end cap washers and end caps. Figure 3 shows the co...
