Life fitness SM20 - Manual

Life fitness SM20 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – SM20 Unpacking & Assembly Instructions; COMPONENTS OF THE SM20 ARE LARGE AND HEAVY. USE CAUTION; MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY; Pinch bar; ASSEMBLY TIME; Two people can accomplish this assembly in approximately 1/2 hour.; UNPACKING; Follow the steps below when unpacking the components of the SM20.; Remove the parts box and shipping boards.
Page 3 – ASSEMBLY; Figure 1 shows an assembled SM20.; Place the two weight “cells; ” in their final resting spots. The cells will be
Page 4 – Bolt on the connecting beam; using a 5/8” socket with extension and combination wrench, to
Page 5 – CROSSOVER CABLE ROUTING; NOTE: THE INFORMATION BELOW IS FOR REFERENCE ONLY. THE
Page 6 – Figure 8. Screw the pulley into the weight stack.
Page 7 – HARDWARE; Description; Main components

Loading the manual

M051-K50-A123

2 STACK MULTI-JUNGLE (SM20)

UNPACKING AND ASSEMBLY INSTRUCTIONS

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - SM20 Unpacking & Assembly Instructions; COMPONENTS OF THE SM20 ARE LARGE AND HEAVY. USE CAUTION; MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY; Pinch bar; ASSEMBLY TIME; Two people can accomplish this assembly in approximately 1/2 hour.; UNPACKING; Follow the steps below when unpacking the components of the SM20.; Remove the parts box and shipping boards.

SM20 Unpacking & Assembly Instructions 2 The SM20 comes partially assembled. Follow the steps below to complete the assembly. WARNING: COMPONENTS OF THE SM20 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING THIS MACHINE. MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY 9/16”Socket wrench withextension ...

Page 3 - ASSEMBLY; Figure 1 shows an assembled SM20.; Place the two weight “cells; ” in their final resting spots. The cells will be

SM20 Unpacking & Assembly Instructions 3 ASSEMBLY Figure 1 shows an assembled SM20. Figure 1. SM20 main components (cables removed for clarity). 1. 1 stack cell (2)2. Connecting beam 1. Place the two weight “cells ” in their final resting spots. The cells will be approximately 11’4” apart as sho...

Page 4 - Bolt on the connecting beam; using a 5/8” socket with extension and combination wrench, to

SM20 Unpacking & Assembly Instructions 4 3. Bolt on the connecting beam using a 5/8” socket with extension and combination wrench, to the cells using the four 7/16” x 6” bolts, 7/16” washers, and 7/16” nuts, end cap washers andend caps. Figure 3 shows the connected cells. You may wish to use a p...