Life fitness OHDPR9 - Manual

Page 2 - PARTS LIST; Tools Required for Assembly

PARTS LIST PART # LEA 7586101 LEA 7586501 LEA 7656601 LEA 7656901 LEA 7585801 LEA 7586601 LEA 7586901 LEA 7588301 LEA 7584401 LEA 7584501 LEA 7587501 LEA 7587901 LEA 7587801 LEA 7589201 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 QTY 1 1 2 2 2 2 1 1 2 2 10 1 1 2 KEY 15 16 17 18 19 20 21 22 23 24 25 26 27 P...

Page 4 - FIGURE 1

STEP 1: FIGURE 1 4 • LOOSELY assemble the REAR UPRIGHT (4) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4” BOLTS (26), two 1/2” PLASITC DOME WASHERS (22), two 1/2” INT TOOTH LOCK WASHERS (20) and two 1/2” LOCK NUTS (23) as shown in FIGURE 1. 23 4 4 26 1/2 X 4-1/4” 2 20 1 22 • LOOSELY assemble th...

Page 5 - FIGURE 2

5 STEP 2: FIGURE 2 • LOOSELY assemble the BOTTOM UPRIGHT SUPPORT (15) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOLTS (26), four 1/2” PLASITC DOME WASHERS (22), four 1/2” INT TOOTH LOCK WASHERS (20) and four1/2” LOCK NUTS (23) as shown inFIGURE 2. 4 26 1/2 X 4-1/4” 22 4 15 20 23 Use this set ...

Page 6 - FIGURE 3

6 STEP 3: FIGURE 3 • LOOSELY assemble the FRONT UPRIGHT (3) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4” BOLTS (26), two 1/2” PLASITC DOME WASHERS (22), two 1/2” INT TOOTH LOCK WASHERS (20) and two 1/2” LOCK NUTS (23) as shown in FIGURE 3. 23 3 3 26 1/2 X 4-1/4” 2 20 1 22 • LOOSELY assemble t...

Page 7 - FIGURE 4

7 STEP 4: FIGURE 4 7 • LOOSELY assemble the REAR UPPER SUPPORT (7) and the CROSS SUPPORTS (5) to the REAR UPRIGHTS (4) using four 1/2 X 4- 1/2” BOLTS (16), eight 1/2” INT TOOTH LOCK WASHERS (20) and four 1/2” LOCK NUTS (23) as shown in FIGURE 4. 4 5 3 • LOOSELY assemble the CROSS SUPPORTS (5) to the...

Page 8 - FIGURE 5

8 STEP 5: FIGURE 5 • LOOSELY assemble the CHIN-UP SUPPORT (8) to the CROSS SUPPORTS (5) and the FRONT UPRIGHTS (3) using two 1/2 X 4-1/2” BOLTS (16), two 1/2 X 4-1/4” BOLTS (26), six 1/2” INT TOOTH LOCK WASHERS (20), two 1/2” PLASTIC DOME WASHERS (22) andfour 1/2” LOCK NUTS (23) as shown in FIGURE 5...

Page 9 - FIGURE 6

9 STEP 6: FIGURE 6 • LOOSELY assemble the WEIGHT HORN UPRIGHTS (6) to the LEFT & RIGHT UPRIGHT BASE (1 & 2) using four 1/2 X 4-1/4” BOLTS (26), four 1/2” PLASTIC DOME WASHERS (22), four 1/2” INT TOOTH LOCK WASHERS (20) and four 1/2” LOCK NUTS (23) asshown in FIGURE 6. 20 22 1/2 X 4-1/4” 26 6...

Page 10 - FIGURE 7; Securely tighten all loose frame connections made to this point.

10 STEP 7: FIGURE 7 • Securely tighten all loose frame connections made to this point. TIGHTEN! TIGHTEN! TIGHTEN! TIGHTEN!

Page 11 - FIGURE 8; DETAIL 8

11 STEP 8: FIGURE 8 • LOOSELY assemble one RIGHT & one LEFT ADJUSTMENT RACK (9 & 10) to the REAR UPRIGHTS (4) as shown, using eight 3/8 X 3-3/4” FLAT HEAD BOLTS (18), eight 3/8” INT TOOTH LOCK WASHERS (21) and eight 3/8” LOCK NUTS (24). See FIG-URE 8. 21 3/8 X 3-3/4” 18 24 3 10 9 10 4 3 9 4 ...

Page 12 - FIGURE 9

12 STEP 9: FIGURE 9 • SECURELY assemble the ten WEIGHT HORNS (11) to the WEIGHT HORN UPRIGHTS (6) using twenty 1/2 X 4-1/4” BOLTS (26), twenty 1/2” INT TOOTH LOCK WASHERS (20), twenty 1/2” PLASTIC DOME WASHERS (22) and twenty 1/2” LOCK NUTS (23) asshown in FIGURE 9. 1/2 X 4-1/4” 26 20 11 6 6 22

Page 15 - equipment, call your local Hammer Strength distributor .

15 STEP 12: FIGURE 12 • Insert the BAR CATCHES (14) into the desired slots on the LEFT & RIGHT ADJUSTMENT RACKS (10 & 9), and allow it to drop down and lock into place. See FIGURE 12. 14 9 10 14 Thank you for purchasing the OLYMPIC HEAVY DUTY POWER RACK. If unsure of proper use of equipment,...

Page 16 - PREVENTATIVE MAINTENANCE TIPS; Consult your physician before beginning any exercise program.; WARRANTY INFORMATION

Clean: • Upholstery with mild soap and water.• Guide rods with a cotton cloth.• Hand grips with mild soap and water.• Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer service representative. Inspect: • Cables for wear or damage and proper tension (...

Life fitness OHDPR9 - Manual

Table of Contents:

Summary

Other Life fitness Models