Life fitness 90S - Manual - manualsarea.com

Page 6 - SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

• DANGER: To reduce the risk of electrical shock, always unplug this Life Fitness product before cleaning or attempting any maintenance activity. • WARNING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each prod- uct to a properly grounded electrical outl...

Page 7 - avant le nettoyage ou toute mesure d'entretien.; AVERTISSEMENT; CONSERVER CES INSTRUCTIONS POUR TOUT USAGE ULTÉRIEUR.

• DANGER: Pour réduire les risques de décharge électrique, toujours débrancher cet appareil Life Fitness avant le nettoyage ou toute mesure d'entretien. • AVERTISSEMENT : Pour réduire les risques de brûlures, d'incendies, de décharges électriques ou de blessures, chaque appareil doit absolument être...

Page 8 - Antenna lead in wire; NSTALLATION

Note to the CATV Installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that providesguidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the ground-ing system of the building as close to th...

Page 9 - Achieve Console Units Only:

M ODELS N EW 95T I T READMILLS T OOLS R EQUIRED : Phillips Screwdriver, Metric Allen Set, M16 & M17 Wrench P ARTS N OT U SED F ROM K IT : (1) Main Bracket Cap, (1) Grommet 1. Turn off the treadmill and unplug it from the power outlet. 2. Remove the six SCREWS securing the MOTOR COVER. Remove the...

Page 14 - Plug in and power on the TV. Refer to the Owners

9. Tilt the DISPLAY CONSOLE (--) forward and connectthe I-R CONTROL (A) and S-VIDEO (--) CABLES tothe back of the DISPLAY CONSOLE. 10. Tape the ends of the all CABLES (POWER, COAXIAL, I-R CONTROL, S-VIDEO) together. 11. Feed the taped end of the MEDIA CABLES (--) through the large hole in the back o...

Page 17 - Console Cable Connections

15 M ODELS 95L I S UMMIT T RAINER T OOLS R EQUIRED : Metric Hex Key Set, Side Cutters, T-45 Torx Wrench 1. Remove the CONSOLE SUPPORT TOP CAP (a). 2. Remove the two SCREWS (b) securing the CONSOLE SUPPORT COVER (c). Removethe CONSOLE SUPPORT COVER and set it and the SCREWS aside. 3. Remove the four ...

Page 18 - ODELS

I NSTALLATION 16 M ODELS 95C I , 93C, 90C U PRIGHT L IFECYCLE ® E XERCISE B IKES T OOLS R EQUIRED : Metric Hex Key Set, Side Cutters NOTE: Proceed with the following steps before attaching the DISPLAY CONSOLE and ACCESSORY TRAY asdescribed in the Assembly Instructions. 1. Locate the SPACER (a). With...

Page 22 - Metric Hex Key Set

I NSTALLATION 20 M ODELS 95X I , 93X, 90X C ROSS -T RAINERS T OOLS R EQUIRED : Metric Hex Key Set , Side Cutters, T-45 Torx Wrench NOTE: Proceed with the following steps before attaching the DISPLAY CONSOLE as described in the Assembly Instructions. Donot install the left BULLHORN and BULLHORN COVER...

Page 24 - POWER SUPPLY CORD into an electrical outlet upon completion.

I NSTALLATION 22 13 Locate the COAXIAL COUPLER (u). Remove the RETAINING NUT (v) and two WASHERS (w& x) from the COUPLER. Insert the COUPLER into the large D-SLOT located at the front of theMOTOR PAN (y). Secure the COUPLER using the two WASHERS and RETAINING NUT previ-ously removed. Tighten the...

Page 26 - at

I NSTALLATION 24 7. Attach the ADAPTER BRACKET (n) to the ENTERTAINMENT CONSOLE (o) to the using fourSCREWS (p). Tighten the SCREWS to 6-8 in-lbs. Do not overtighten the SCREWS. Attach the ENTERTAINMENT CONSOLE to the MOUNTING BRACKET (q) using fourSCREWS (r) and WASHERS (s). Tighten the SCREWS to 6...

Life fitness 90S - Manual

Table of Contents:

Summary

Other Life fitness Models