Liebherr UWTGB1682 - User Manual

Liebherr UWTGB1682 Refrigerator – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Mounting the dust filter; Remove the protective film from the; at the bottom; Appliance venting; The required air flow is directed through the plinth.; Cut-out section in the plinth panel; Supplied accessories; Important; The cut-out section in the
Page 3 – Appliance dimensions; The socket must not be situated behind the appli-; Installation dimensions; View from; Side view
Page 4 – Installing the appliance; The appliance must be aligned horizontally and verti-; When sliding in the appliance, make sure that the mains; • Screw the appliance to the
Page 5 – If the foam moulding is not installed, the appliance will not; backwards into its final position.; The foam moulding must be touching the ventilation grille.
Page 6 – Changing over door hinges; The door must now be held se-
Page 8 – Adjusting the lateral tilt of the door
Page 10 – Liebherr Hausgeräte Lienz GmbH; Österreich

Loading the manual

UWT 1682

Installation instructions

Page 10

Multi-temperature wine cabinet

7080 198-00

Übersetzung

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Mounting the dust filter; Remove the protective film from the; at the bottom; Appliance venting; The required air flow is directed through the plinth.; Cut-out section in the plinth panel; Supplied accessories; Important; The cut-out section in the

10 Mounting the dust filter The supplied dust filter prevents that dirt enters the motor compartment, reducing the refrigeration performance. Therefore always install the dust filter. Remove the protective film from the dust filter. Insert the filter at the bottom and click into place at the top . A...

Page 3 - Appliance dimensions; The socket must not be situated behind the appli-; Installation dimensions; View from; Side view

11 EN Appliance dimensions 1 In this area, the power cord comes out of the appliance rear. Free length of the power cord = 2000 mm Choose the position of the socket considering these specifications. The socket must not be situated behind the appli- ance and must be easily accessible. Installation di...

Page 4 - Installing the appliance; The appliance must be aligned horizontally and verti-; When sliding in the appliance, make sure that the mains; • Screw the appliance to the

12 Installing the appliance 2 . Adjust the height of the appliance to 4 mm less than the recess height by turning the adjustable feet clockwise. Turn the spanner anticlockwise to raise the appliance front and clockwise to lower it. Position the spanner accordingly Important The appliance must be ali...