Liebherr MW-2400 - User Manual

5 s afeTy for too long; it could cause food poisoning. • Any repairs and work on the appliance should only be performed by the customer service department or other trained person-nel. The same applies to changing the power cord. • Only perform repair and other work on the appliance when the plug has...

6 s afeTy Safety Regulations This appliance is intended to be used in household and similar applications. This includes, for example, use- in staff kitchenettes, bed and breakfast establish- ments, - by guests in cottages, hotels, motels and other forms of accommodation, - in catering and similar se...

7 f eaTures Description of the Appliance MW 18.. MW 24.. (1) Control panel(2) Pull-out shelf(3) Presentation light(4) Air filter(5) Adjustable-height feet (6) Model plate(7) Top zone(8) Middle zone (MW 24.. only)(9) Bottom zone(10) Serving shelf

8 o peraTion Control Panel Three different actions to operate the control panel. Changing Language and Temperature Unit For future changes of language and temperature unit, the appliance must be switched off and on again (cus-tomer settings will not be deleted). Touch Touch to activate functions. Pr...

9 o peraTion Main Menu Slide through the main menu. The following functions are available. Temperature display for top zone and temperature setting. Temperature display for middle zone and temperature setting (MW 24.. only). Switching the fan on and off. Appliance operating mode for Sabbath and holi...

10 o peraTion Fan The interior fan ensures a constant and even interior temperature, and a suitable climate for wine storage. Switching on the fan (all zones) will further increase the humidity in the appliance, which has a particularly posi-tive effect for long-term storage. The increased level of ...

11 o peraTion SabbathMode When SabbathMode is active, some functions of the electronic features are switched off to comply with STAR-K Kosher Certification. • The lighting remains off.• There is no door alarm.• There is no temperature alarm.• The unit will return to SabbathMode after a power failure...

12 o peraTion Maintenance Message The maintenance message will sound at regular inter-vals while the appliance is operating. The dust filter requires cleaning. Touch or or Touch Maintenance Confirmation Touch Close the appliance door. Display when the appliance door is opened again. Touch Replace th...

13 o peraTion Touch Setup Menu Includes the adjustment for display brightness, lan-guage, units, activation of the SmartDeviceBox and the device information. Slide to the left. Display shows the device information. Slide to the right. Slide to the left. Slide to the left. Slide to the left. Slide to...

14 o peraTion Touch Touch Touch Display Brightness Language 100% = maximum brightness. 25% = lowest brightness. Slide to the desired value and touch Slide to the left. Slide twice to the left. Touch to exit. Touch to exit. Slide to your language and touch Available languages: • German • Portuguese (...

15 o peraTion Touch Units Slide to the left. Touch to exit. Slide to the desired temperature unit and touch SmartDeviceBox The appliance is ready for integration into a smart home and for extended services. Other options can be select-ed with a SmartDeviceBox. This is activated via the MyLiebherr cu...

16 o peraTion Description of the SmartDevice Displays Display to start the WLAN connection. The symbol flashes. Connection to WLAN is in progress. The router credentials are displayed. Appliance is connected to WLAN. SmartDeviceBox is inserted. Connection reset This message informs you of any router...

17 o peraTion Electronic fault. Touch Action Contact service, stating the failure code displayed. Touch Electronic Fault Alarm Touch Press Press for approx. 2 seconds to read failure number again. Touch Power Alarm The power supply was interrupted. Touch If the interior temperature was too high: Tou...

18 W ine C ooler C omparTmenT Storage Diagram for 0.75 l Bordeaux bottles to standard NF H 35-124 MW 18.. MW 24.. Number of bottles Number of bottles Total 75 bottles Total 100 bottles IMPORTANT The maximum load per wooden shelf is 44 lbs (20 kg).

19 W ine C ooler C omparTmenT Equipment Pull-out Shelf The bars can be removed and repositioned to store larger or smaller bottles.Raise the bar at the rear (1) and pull it out (2). Bar Configuration for Maximum Number of Bottles

20 W ine C ooler C omparTmenT Serving Shelf Bottle Holder The serving shelf can be pulled out to provide a surface to hold bottles and glasses. Insert the supplied bottle holders to house the maxi-mum number of bottles. Insert the bottle holder between the bars (1), turn it (2), and slide it towards...

21 C leaning Inserting the Wooden Shelf Removing and Inserting the Wooden Shelves The wooden shelves can be removed for easier clean-ing of the inside of the appliance. Pull out the wooden shelf, press the sides (1) gently, lift it upwards (2), and pull it out forwards (3). Position the wooden shelf...

22 C leaning Removing the Serving Shelf Inserting the Serving Shelf To remove the serving shelf, first remove the wooden shelf above the serving shelf. Insert the wooden shelf above the serving shelf. Pull out the serving shelf a little (1), lift the front upwards (2) to release the magnetic connect...

23 m ainTenanCe Maintenance can be car-ried out independently of the specified regular inter-vals. The maintenace menu includes the following steps. Maintenance Menu Complete cleaning For complete maintenance of the appliance. New air filter To reset maintenance timer. To return to the main menu.

24 m ainTenanCe Maintenance New Air Filter Wine will constantly adjust to the ambient conditions. The quality of the air therefore plays a vital role in stor-age. The filter should be changed in at least the specified maintenance intervals. Touch Message Turn the cover counterclockwise and remove. T...

25 m ainTenanCe Press for approx. 2 seconds. The maintenance interval for the air filter change will be reset. Slide twice to the left. Touch to exit the menu. Cleaning the Dust Filter Clean the dust filter in the toe kick area in at least the specified maintenance intervals. Remove the ventilation ...

26 a ddiTional f unCTions Additional Functions Touch Touch Slide to the right. Press for approx. 2 seconds Activating the defrost function manuallyReset to factory settingDemoMode Slide to left or right. Enter code 151 . If a wrong code is entered, the display switches back to the device information...

27 a ddiTional f unCTions DemoMode DemoMode can be activated for presenting the appli-ance at exhibitions or in showrooms as if it were in nor-mal operating mode. Touch Activating DemoMode DemoMode is activated. The cooling circuit is switched off! MW 18.. MW 24.. Reset The electronic control can be...

28 a ddiTional f unCTions Deactivating DemoMode Touch Slide to the right. Press for approx. 2 seconds Slide to left or right. Enter code 151 . Press DemoMode is deactivated. After 1 second, the screen shows MW 18.. MW 24..

29 T roubleshooTing Customer Service If none of the above possible causes apply, and you can not rectify the fault yourself, contact your nearest customer service representative. Indicate the type (1) of appliance, service number (2) and the appliance/serial num-ber (3) as indicated on the model pla...

For Service in the U.S. Liebherr Service Center Toll Free: 1-866-LIEBHER or 1-866-543-2437 Email: [email protected] PlusOne Solutions, Inc. 3501 Quadrangle Blvd, Suite 120Orlando, FL 32817 For Service in Canada Liebherr Service Center Toll Free: 1-888-LIEBHER or 1-888-543-2437 www.euro-parts.ca EURO...