Liebert Web Card - Manual
Liebert Web Card – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Liebert Intellislot
®
Web Card
Quick Start Guide
I
NSTALL
• Locate the Intellislot option bay on your Liebert equipment—You
might need to remove a plastic cover.
• Insert the IntelliSlot Web Card into the Intellislot bay.
• Secure the card with the supplied screws.
• Connect an Ethernet cable.
DHCP
: The card ships with DHCP service enabled. The MAC
address is printed on a sticker affixed to the top of the card.
OR
Static IP
: To assign a static IP address, use the
Service Terminal to configure the card. Proceed
to Steps 2 & 3.
C
ONNECT
THE
C
ABLE
• Locate the blue serial configuration cable (null
modem) that shipped with the card.
• Connect the configuration cable to the DB-9 port
on the card and to a COM port on your PC.
C
ONFIGURE
THE
C
ARD
• Use terminal emulation software,
such as HyperTerminal
™
, to open a
direct connection to the card.
• Press
Enter
for the Main Menu,
above right.
• Select option
2
and follow the
instructions to enter an IP
ADDRESS, NETMASK and GATE-
WAY.
• Press
Esc
to return to the Main
Menu.
• Enter
X
and press
Enter
to exit
HyperTerminal and save your changes.
Baud Rate:
9600
Data Bits:
8
Parity:
None
Stop Bits:
1
Flow Control: None
NOTE
When installing the card in a Liebert NX
™
, configure the
communication port of NX to 2400 baud. Refer to the NX user
manual for instructions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
