Page 2 - Automatic Process From Washing To Drying.; More economical by Intelligent Wash System
roduct Feature P ontents C 2 Important Safety Information ...........................................................3 Specification ....................................................................................4 Installation .......................................................................
Page 3 - mportant Safety Information; READ ALL INSTRUCTIONS BEFORE USE; IMPORTANT SAFETY INSTRUCTIONS; SAVE THESE INSTRUCTIONS; WARNING
mportant Safety Information I 3 For your safety, the information in this manual must be followed to minimize the risk of fireor explosion, electric shock, or to prevent property damage, personal injury, or loss of life. ! READ ALL INSTRUCTIONS BEFORE USE WARNING! • Read all instructions before using...
Page 4 - pecification; Accessories
4 pecification S Name: Front-loading Washing Machine Power supply : 120V~, 60Hz Size: 23 3/ 8 X 25 3/ 8 X 33 1/ 4 (inches) 595 X 645 X 845 (mm) Weight: 147 lbs. (66.7 kg) Wash capacity: 2.11 cu.ft. Dry capacity: 2.11 cu.ft. – Max. 8 13/ 16 lbs. (4 kg) Spin speed: 1400 rpm max. (WM3431H*)1200 rpm max...
Page 5 - nstallation; • Packing and all shipping bolts must be; Shipping bolts
nstallation I 5 The appliance is fitted with shipping boltsto prevent internal damage duringtransport. • Packing and all shipping bolts must be removed before using the washer. When unpacking the base, be sure toremove the additional packing supportin the middle of the base packing. Shipping bolts I...
Page 6 - Level floor; Power outlet; Installation place requirement
nstallation I 6 Level floor Allowable slope under entire washer is 1˚. Power outlet Must be within 60 inches (1.5 m) of eitherside of the washer. Do not overload theoutlet with more than one appliance. Time-delay fuse or circuit breaker isrecommended. It is the personal responsibilityand obligation ...
Page 7 - Connecting water supply hose
7 nstallation I • Water supply pressure must be between 4.5 and 145 PSI (30~1000 kPa) • Do not crossthread when connecting inlet hose to the valve. • If the water supply pressure is more than 145 PSI, a pressure reducing device shouldbe installed. • Two Sealing washers are supplied with the water in...
Page 8 - Installation of drain hose; • The drain hose should not be placed higher
8 nstallation I Installation of drain hose • The drain hose should not be placed higher than 40 ” above the floor. • Properly securing the drain hose will protect the floor from damage due to waterleakage. This equipment is not designed for maritime use or for mobile installations such as inRV’s, ai...
Page 9 - Level adjustment; Concrete floors
9 nstallation I Level adjustment Concrete floors Wooden floors 1. Adjusting the washing machine level properly prevents excessivenoise and vibration.Install the appliance on a solid and level floor surface, preferably in acorner of the room. 2. If the floor is uneven, adjust the adjustable feet as r...
Page 10 - reparation Before Washing; Fabric Care Labels; Separate clothes according to amount of soil.; Check before loading; IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.; • Check all pockets to make sure; Before the first washing
10 reparation Before Washing P 1. Fabric Care Labels Look for a care label on your clothes. This will tell you about the fabric content of yourgarment and how it should be washed. 2. Sorting To get the best results, sort clothes into loads that can be washed with the same wash cycle.Different fabric...
Page 11 - dding detergent; The Dispenser Drawer; Adding detergent and fabric softener
11 dding detergent A • Do not exceed the maximum fill line. Overfilling can cause early dispensingof the fabric softener which could stainclothes. • Do not leave the fabric softener in the detergent drawer for more than 2 days.(Fabric softener could harden) • Softener will automatically be added dur...
Page 12 - ycles
12 ycles C 1) Automatic wash load (weight) detection: Automatically detects the load and optimizes the washing time. After detecting, theestimated time remaining in the cycle will be displayed. ■ Select cycles designed for different types of fabric and soil levels.
Page 13 - ow to use washer; Cycle selector knob
13 ow to use washer H • Rotate the Cycle selector knob to select cycle designed for different typesof fabric and soil levels. • Each cycle has a preset Water Temperature, Spin Speed, Soil Level,and Option (See page 12). • The preset settings can be changed anytime before Start. 2. Cycles • Use this ...
Page 14 - Spin Speed
14 ow to use washer H • Select a water temperature based on the type of load you are washing. • Follow the fabric care label and chart below for best results. • Warm rinses leave the loads dryer than cold rinses. Warm rinses increasewrinkling. • In cold climates, a warm rinse makes the load more com...
Page 15 - ) Drying Automatic guide
15 ow to use washer H 1) Drying Automatic guide 2) Drying time guide • Drying options are easily selected with the Dry button. • For most even drying , make sure all articles in the clothes load are similar in material and thickness. • Do not overload dryer by stuffing too many articles into drum. I...
Page 16 - OPTION; DOOR LOCKED
16 ow to use washer H OPTION MULTI DISPLAY STATUS INDICATOR CHILD LOCK DOOR LOCKED • If the laundry is heavily soiled, Extra Wash option is effective. • Available in Sanitary, Cotton/Towels, Normal and Perm Press cycles. 2. Extra Wash • Lights whenever the door of the washer is locked. • The door ca...
Page 17 - aintenance; The water inlet filter; The drain pump filter; CAUTION; Be careful when draining if the water is hot.
17 aintenance M The water inlet filter - " " error message will blink on the control panel when water does not enter the detergent drawer. - If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. We recommend cleaning it every few months. Th...
Page 18 - Dispenser drawer
18 aintenance M Dispenser drawer ❋ After a while detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water.• If necessary it can be removed completely from the machine by pressing the catch downward and by pulling it out. • To...
Page 19 - Cleaning your washer; Do not add laundry
19 aintenance M ■ Cleaning your washer 1. Exterior Proper care of your washer can extend its life.The outside of the machine can be cleaned with warm water and a neutral, non-abrasive household detergent.Immediately wipe off any spills with a damp cloth.Try not to damage the surface with sharp objec...
Page 20 - roubleshooting guide; Problem
20 roubleshooting guide T This washing machine is equipped with automatic safety functions which detect and diagnoseproblems at an early stage and react appropriately. When the machine does not function properlyor does not function at all, check the following points before you call the Service Depar...
Page 23 - arranty
