Page 2 - Important Precautions; On Safety; The appliance coupler is used as the disconnect device.
1 Important Precautions This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential electrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules ...
Page 3 - On Installation; Avoid high temperatures and humidity.
2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a s...
Page 4 - On Cleaning; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.
Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub...
Page 5 - Accessories; NOTE; Please make sure the following items are included with your
4 Accessories User's Guide/Cards Power Cord 15-pin D-Sub Signal Cable (To set it up, this signal cable may be attached to this product before shipping out.) DVI-D Signal Cable (This feature is not available in all countries.) NOTE This accessories may look different from those shown here.User must u...
Page 6 - Connecting the Display; Connecting and Disassembling the stand; Place the monitor face down on the soft cloth.
5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices is turned off. Connecting and Disassembling the stand 1. Place the monitor face down on the soft cloth. 2. Assemble the Stand Base into the Stand Body in the c...
Page 7 - IMPORTANT; Then fold the screw handle flat.; Screw
6 Connecting the Display IMPORTANT This picture depicts the general model of connection. Your monitor may differ from the itemsshown in the picture.Do not carry the product upside down holding only the stand base. The product may fall andget damaged or cause injury. 4. Then fold the screw handle fla...
Page 8 - Positioning your display; After installation, adjust the angle as shown below.; Tilt Range : -2 ̊ to 15 ̊; ERGONOMIC
7 Connecting the Display Before setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices is turned off. Positioning your display After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum co...
Page 9 - other attached devices is turned off.; Connecting with the PC/AV equipment
8 Connecting the Display A B Connect DVI-D(Digital signal) CableConnect D-sub(Analog signal) Cable Connect HDMI Cable 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect the signal cable . When attached, ti...
Page 10 - is executed automatically.
9 Connecting the Display NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjuststhe display to optimal settings for individual input signals. ‘AUTO/SET’ Function? Whe...
Page 11 - Control Panel Functions; Front Panel Controls; PHOTO EFFECT; MENU Button; MENU button; Button; TIME CONTROL, LIVE SENSOR or SMART
10 Control Panel Functions Front Panel Controls Button Use this button to move to EZ ZOOMING, 4:3 IN WIDE and PHOTO EFFECT for D-SUB/DVI-D signal input. Use this button to move to 4:3 IN WIDE, PHOTO EFFECT and VOLUME for HDMI signal input. For more information, refer to page 17. MENU Button Use this...
Page 12 - AUTO IMAGE ADJUSTMENT; When adjusting your display settings, always press the; Buttons; Use this button to turn the display on or off.; Power Button
11 Control Panel Functions Use this button to enter a selection in the On Screen Display. AUTO/SETButton AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD).(Only for D-SUB input)This will automatically adjust your d...
Page 13 - Power Indicator
12 Control Panel Functions The power indicator stays red if the display is runningproperly (On Mode). If the display is in Sleep Mode(Energy Saving), the power indicator is blinking red. Power Indicator This is the sensor to measure the external brightness. Makes the screen brighter or darker, depen...
Page 14 - On Screen Display (OSD) Control Adjustment; Screen Adjustment
13 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operatingparameters of the display is quick and easy with the On ScreenDisplay Control system. A short example is given below to familiarize you with the use of thecontrols. The followi...
Page 15 - On Screen Display(OSD) Selection and Adjustment; SMART
14 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. CINEMAMODE To focus on the moving pictureselected DSUB AUTOBRIGHT To control screen brightnessautomatically TIMECONTROL To notify the user of a specifiedt...
Page 16 - SETUP; The order of icons may differ depending on the model (14 to 24).
15 On Screen Display(OSD) Selection and Adjustment LANGUAGE OSD POSITION (HORIZONTAL / VERTICAL) WHITE BALANCE OVERSCAN RTC (Only W2286L) POWER INDICATOR FACTORY RESET To customize the screen statusfor a user's operatingenvironment SETUP HORIZONTAL VERTICAL CLOCK PHASE SHARPNESS To improve the clari...
Page 17 - The OSD screen will appear when you press the
16 On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you press the button on the front of the monitor. Main menu Description MENU : Exit , : Move, SET : Select CINEMA MODE To focus on the moving picture selected.This function adjusts the brightness of areas other thanth...
Page 18 - MENU; To select the image size of the screen.; WIDE; : Switch to full screen mode; EZ ZOOMING; To select the display resolution.
17 On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you press the button on the front of the monitor. Main menu Description MENU : Exit : Move SET : Select 4:3 IN WIDE To select the image size of the screen. • WIDE : Switch to full screen mode according to input image ...
Page 20 - Main menu Sub menu; MOVIE; Select this when you are playing a game.; NORMAL
19 On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you touch the button on the left bottomof the monitor. These features let you easily select the best desired image conditionoptimized to the environment (ambient illumination, image types etc). Main menu Sub menu Desc...
Page 21 - Select this when you watching general sports.; This allows users to adjust
20 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description D-SUB/DVI-D input HDMI input DEMO SPORTS This is used for advertising in the store. The screenwill be divided to show the standard mode on theleft and video mode on the right so that theconsumers can check the differen...
Page 22 - Menu Name; Press the; main menu of the OSD appears.; Main Menu
21 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu. Sub-menus NOTE OSD (On Screen Display) menu languages on th...
Page 23 - PICTURE; To adjust the brightness of the screen.; COLOR
22 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE BRIGHTNESS CONTRAST GAMMA BLACK LEVEL To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50 / 0 / 50On the monitor, high gamma valuesdisplay whitish image...
Page 24 - TRACKING; CLOCK; To adjust the clearness of the screen.; HORIZONTAL; To move image left and right.
23 On Screen Display(OSD) Selection and Adjustment TRACKING Main menu Sub menu Description MENU : Exit : Decrease : Increase SET : Select another sub-menu CLOCK PHASE SHARPNESS To minimize any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange. To adj...
Page 25 - LANGUAGE; OVERSCAN
24 On Screen Display(OSD) Selection and Adjustment Press the , buttons to reset immediately. SETUP MENU : Exit : Adjust : Adjust SET : Select another sub-menu Main menu Sub menu Description To choose the language in which the controlnames are displayed. To adjust position of the OSD window on thescr...
Page 26 - Troubleshooting; Check the following before calling for service.; No image appears
25 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator red? ● Is the power...
Page 27 - Display image is incorrect; Check
26 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Press the AUTO/SET button to automatically adjust your display image to...
Page 28 - Have you installed the; The screen color is; The Audio function is not working
27 Troubleshooting Do you see an "Unrecognized monitor, Plug&Play (VESA DDC)monitor found" message? ● Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with yourdisplay. Or, you can also download the driver ...
Page 29 - Specifications
28 Specifications W2286L 55.8673 cm (21.995 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 55.8673 cm0.282 mm x 0.282 mm (Pixel Pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync.SOG (Sync On...
Page 32 - Indicator; LED Color; HDMI Vedio INPUT
Specifications 31 Indicator On Mode Sleep Mode Off Mode Red Red Blinking Off LED Color MODE Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 12345678 480p576p720p720p 1080i1080i 1080p1080p 31.5031.2537.5045.0028.1233.7556.2567.50 6050506050605060 HDMI Vedio INPUT
Page 33 - MODEL
As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. E N E RGY STA R i s a s et o f p owe r- s a v i n g guidelines issued by the U.S. Environmental Protection Agency(EPA). Make sure to read the Important Precautions bef...
