Page 2 - On Safety; Do not Open the Display:; Important Precautions
1 This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules for its installation, ...
Page 3 - On Installation; Avoid high temperatures and humidity.
2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a s...
Page 4 - On Cleaning; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.
Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub...
Page 5 - Accessories; NOTE
4 Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with yourmonitor. If any items are missing, contact your dealer. User's Guide/Cards Power Cord (Depending on the country) 15-pin D-Sub Signal Cable (To set it up, this signal cable may be attache...
Page 6 - Connecting the Display; Connecting the stand base; WARNING; S t a n d B a s e
5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices are turned off. Connecting the stand base 1 . Place the monitor with its front facing downward on a cushion or soft cloth. 3 . Once assembled take the monitor ...
Page 7 - IMPORTANT; Positioning your display; After installation, adjust the angle as shown below.; Tilt Range; Removing the stand base
6 Connecting the Display IMPORTANT This illustration depicts the general model of connection. Your monitor may differ from the itemsshown in the picture.Do not carry the product upside down holding only the stand base. The product may fall and getdamaged or injure your foot. Positioning your display...
Page 8 - Swivel Range; ERGONOMIC
7 Connecting the Display Swivel Range : 355˚ 355 Height Range : maximum 4.33 inches (110.0 mm) * Please be sure to remove the Locking pin to adjust the height. 110.0 mm ERGONOMIC It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tiltangle of the m...
Page 9 - Landscape & Portrait : You can rotate the panel 90; Be careful with the cables when rotating the screen.; Using the Pivot function
8 Connecting the Display -The pivot function allows you to rotate the screen 90 degrees clockwise. 1 . Lift the monitor to its highest height to utilize the Pivot function. 2 . Landscape & Portrait : You can rotate the panel 90 o clockwise. Please be cautious and avoid contact between the monito...
Page 10 - Connecting with the PC/AV equipment
Connecting the Display 9 A B Connect DVI-D CableConnect D-SUB Cable Connect HDMI Cable 1. Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. 2. Connect signal input cable and power cord in order, then tighten the screwof...
Page 11 - is executed automatically.
10 Connecting the Display NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjuststhe display to optimal settings for individual input signals. ‘AUTO/SET’ Function? Wh...
Page 12 - Control Panel Functions; Front Panel Controls; MENU Button; Use this button to enter or exit the On Screen Display.; for several seconds. The message; for several seconds. The message; MODE Button; Use this button to move to items in
11 Control Panel Functions Front Panel Controls MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings,so that they cannot be inadvertently changed. Press andhold the MENU button for several seconds. The m...
Page 13 - AUTO IMAGE ADJUSTMENT; When adjusting your display settings, always press the; Buttons; Use this button to turn the display on or off.; Power Button; Use the buttons to adjust the volume.
12 Control Panel Functions Use this button to enter a selection in the On Screen Display. AUTO/SETButton AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). (Only for D-SUB input) This will automatically adjust your...
Page 14 - On Screen Display (OSD) Control Adjustment; Screen Adjustment
13 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operatingparameters of the display is quick and easy with the On ScreenDisplay Control system. A short example is given below to familiarize you with the use of thecontrols. The followi...
Page 15 - On Screen Display(OSD) Selection and Adjustment; MODE; COLOR
14 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. MOVIE TEXT PHOTO USER sRGB MODE BRIGHTNESS CONTRAST GAMMA BLACK LEVEL PICTURE Standard image settings. : D-SUB(Analog signal) input : DVI-D(Digital signal...
Page 17 - The OSD screen will appear when you press the; button on the front
16 16 On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you press the MODE button on the front of the monitor. Main menu Description Icons Menu Name Sub-menu Name MENU : Exit : Move SET : Select MOVIE It is a mode that the screen is adjusted to the best to view the vide...
Page 18 - Menu Name; Press the; MENU; Button, then the main; Main Menu
17 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu. Sub-menus NOTE OSD (On Screen Display) menu languages on th...
Page 19 - PICTURE; BRIGHTNESS; To adjust the brightness of the screen.
18 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE MENU : Exit : Decrease : Increase SET : Select another sub-menu BRIGHTNESS CONTRAST GAMMA BLACK LEVEL To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : 1....
Page 20 - Adjusts the screen hue.
19 On Screen Display(OSD) Selection and Adjustment COLOR TEMP PRESET Select either PRESET or USER to adjustthe screen color. Select the preset color temperature. 5700K-6500K: Yellow screen color. 6500K-7500K: Red screen color. 8500K-9300K: Blue screen color. COLOR Main menu Sub menu Description PRES...
Page 21 - TRACKING; CLOCK; To adjust the clearness of the screen.; HORIZONTAL; To move image left and right.
20 On Screen Display(OSD) Selection and Adjustment TRACKING Main menu Sub menu Description MENU : Exit : Decrease : Increase SET : Select another sub-menu CLOCK PHASE SHARPNESS To minimize any vertical bars orstripes visible on the screenbackground.The horizontal screen size will alsochange. To adju...
Page 22 - SETUP
21 On Screen Display(OSD) Selection and Adjustment SETUP Main menu Sub menu Description To choose the language in which the controlnames are displayed. To adjust position of the OSD window on thescreen. If the output of the video card is different therequired specifications, the color level maydeter...
Page 23 - Troubleshooting; Check the following before calling for service.; No image appears
22 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator red? ● Is the power...
Page 24 - Display image is incorrect
23 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Press the AUTO/SET button to automatically adjust your display image to...
Page 25 - The screen color is; The Audio function is not working; Have you installed the
24 Troubleshooting Display image is incorrect ● The screen color is mono or abnormal. ● The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than ...
Page 26 - Specifications
25 NOTE Information in this document is subject to change without notice. Specifications 22.0 inches (55.867 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.867 cm0.282 x 0.282 mm (Pixel Pitch) Display Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75...
Page 27 - Indicator; LED Color; HDMI VEDIO INPUT
26 Specifications Preset Modes (Resolution) - D-sub(Analog) / DVI-D(Digital) INPUT Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) *Recommend Mode Indicator On Mode Sleep Mode Off Mode Red Red Blinking Off LED Color MODE Display Modes (Resolution) Horizontal Freq. (kHz) Vertica...
Page 28 - Installing the Wall mount plate; Install the Wall mount plate.
27 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate orthe interchange device. Wall mount plate (Separate purchase) - Be sure to use screws and a wall mount that meet VESA standards. - Using screws longer than those recommended might damage the product...
Page 29 - Digitally yours
