Page 2 - ENG; English; TablE of ConTEnTs
2 ENG English Table of Contents TablE of ConTEnTs 3 assEMblInG anD PREPaRInG 3 Unpacking 4 Parts and buttons 6 Lifting and moving the Monitor 6 Setting Up the Monitor set 6 - Attaching the Stand Base 7 - Mounting on a table 7 - Adjusting the angle 8 - Adjusting the stand height 8 - Using the Kensing...
Page 3 - assEMblInG anD PREPaRInG; Unpacking; CaUTIon
3 ENG English assEMblInG anD PREPaRInG assEMblInG anD PREPaRInG Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look...
Page 4 - Parts and buttons
4 ENG English assEMblInG anD PREPaRInG Parts and buttons Power Indicator y LED On : Power is on y LED Off: Power is off Front Side Buttons Input Connectors (See p.13 to 16) (Power Button) Input Connectors (See p.16 )
Page 6 - setting Up the Monitor set; attaching the stand base; lifting and moving the
6 ENG English assEMblInG anD PREPaRInG setting Up the Monitor set attaching the stand base 1 Place the monitor's screen face down. y To protect the screen from scratches, cover the surface with a soft cloth. 3 Using a coin, turn the screw clockwise to se- cure the stand base. 2 Check the position (a...
Page 7 - Adjusting the angle; WARNING; Mounting on a table; CAutIoN
7 ENG English ASSEMBLING AND PREPARING Adjusting the angle 1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 15° backwards for a comfortable viewing experience. y To avoid injury to th...
Page 8 - Using the Kensington locking; noTE; adjusting the stand height
8 ENG English assEMblInG anD PREPaRInG Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor.For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect t...
Page 9 - Detaching the stand body
9 ENG English assEMblInG anD PREPaRInG Detaching the stand body 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver, remove the four screws and detach the stand from the monitor. y The components appearing in the il...
Page 10 - Swivel stand; Using the Pivot function
10 ENG English ASSEMBLING AND PREPARING Swivel stand y Image shown may differ from your Monitor set. 1 Swivel 356 degrees and adjust the angle of the Monitor set to suit your view. 1 Lift the monitor to its highest height to utilize the Pivot function. Using the Pivot function The pivot function all...
Page 11 - Mounting on a wall
11 ENG English assEMblInG anD PREPaRInG 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will n...
Page 13 - UsInG THE MonIToR sET; Connecting Input signal Cable
13 ENG English UsInG THE MonIToR sET UsInG THE MonIToR sET Connecting Input signal Cable y This monitor supports the *Plug and Play feature.*Plug and Play: A feature that allows you to add a device to your computer, without having to reconfigure anything or install any manual drivers. D-sUb In conne...
Page 14 - DVI connection - PCoIP
14 ENG English UsInG THE MonIToR sET DVI connection - PCoIP Transfers video signals to another monitor. Con-nect the monitor using the DVI cable as illustrated below.It is used for the expansion or replication of PCoIP mode screen. y To connect the monitor to a computer, use the appropriate signal c...
Page 15 - Connecting lan/Peripherals; lan connection - PCoIP
15 ENG English UsInG THE MonIToR sET Connecting lan/Peripherals lan connection - PCoIP The LAN connection transmits PCoIP signals to the monitor. Connect the router or switch to the monitor using a LAN cable as illustrated below. y The LAN cable is sold separately. y The following LAN cable type can...
Page 16 - Peripheral device connection
16 ENG English UsInG THE MonIToR sET y Peripheral devices are sold separately. y The USB ports on the left and bottom of the monitor can be used to connect the key-board, mouse, and other USB devices. y Cables with angled plugs may have clear-ance issues, use straight plugs when pos-sible. Angle Typ...
Page 17 - self Image adjustment
17 ENG English UsInG THE MonIToR sET y What is "Self Image Adjustment"? This func-tion runs when the monitor is connected for the first time and performs automatic image adjustment for each signal (only available for analog [D-SUB input] signals) to provide an optimal screen display. self Im...
Page 18 - CUsToMIZInG sETTInGs; accessing The Main Menus
18 ENG English CUsToMIZInG sETTInGs CUsToMIZInG sETTInGs accessing The Main Menus 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press to select the desired menu item. 3 To change the settings of the selected item press the buttons on the front of the monitor...
Page 19 - MEnU settings; Picture
19 ENG English CUsToMIZInG sETTInGs MEnU settings Picture 1 Press any button on the front of the monitor to dis- play the MonIToR sETUP OSD menu. 2 Press the MEnU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the monitor. 4 Select EXIT to le...
Page 20 - Color
20 ENG English CUsToMIZInG sETTInGs Menu analog (D-sUb) PCoIP Description ColoR TEMP ● ● Allows PRESET or USER to be selected. WARM Sets the screen color to a reddish tone. MEDIUM Sets the screen color between the reddish and bluish tone. COOL Sets the screen color to a bluish tone. UsER ● ● You can...
Page 21 - Display
21 ENG English CUsToMIZInG sETTInGs Menu analog (D-sUb) PCoIP Description HoRIZonTal ● x Moves the display area left or right. VERTICal ● x Moves the display area up or down. CloCK ● x If vertical lines are shown on the screen, adjust the frequency to mini- mize the lines and adjust the screen's hor...
Page 22 - others
22 ENG English CUsToMIZInG sETTInGs Menu analog (D-sUb) PCoIP Description lanGUaGE ● ● Sets the menu screen to the desired language. PCoIP ● ● Allows the PCoIP to be turned ON or OFF.If PCoIP is ONIf you switch to D-SUB input, PCoIP continues to be turned on.If PCoIP is OFFIf you switch to D-SUB inp...
Page 23 - settings : PCoIP Input
23 ENG English CUsToMIZInG sETTInGs 1 Press any button on the front of the monitor to dis- play the MonIToR sETUP OSD menu. 2 Press the aUTo button to automatically adjust the screen. 3 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) butto...
Page 24 - TRoUblEsHooTInG
24 ENG English Troubleshooting TRoUblEsHooTInG nothing is displayed on the screen Is the monitor's power cord plugged in? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator. Is the power indicator displaying as red? y Adjust the br...
Page 26 - Product SPEcification
26 ENG English Specifications Product SPEcification LCD Screen Type 58.42 cm (23 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) ScreenDiagonal length of the screen: 58.42 cm Pixel Pitch 0.2652 mm x 0.2652 mm Resolution Maximum Resolution 1920 x 1080 @ 60 Hz Recommended Resolution 1920...
Page 27 - Preset Mode
27 ENG English Product Specification Preset Mode Display Modes (Resolution) Horizontal frequency (kHz) Vertical frequency (Hz) Polarity (H/V) Remark 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1280 x 1024 63.981 60.02 +/+ 1680 x 1050 65....
Page 28 - PRoPER PosTURE; Proper posture for using the monitor
28 ENG English Proper Posture PRoPER PosTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. y Using the monitor for a prolonged period of time can cause eye fatigue. Take a 10-minute break every hour. y The stand is designed to best support...
Page 29 - USIng PCoIP SolUtIon; notE
29 ENG English Using PCoIP Solution USIng PCoIP SolUtIon Selecting the Connect button initiates a PCoIP or RDP session depending on the session settings. While the PCoIP connection is pending, the OSD local GUI will display a "Connection Pending" message. When the connection is established, ...
