Page 2 - FCC NOTICE; • A Class B digital device; WARNING; a r n i n g / C a u t i o n
2 Plasma Monitor Warning/Caution WARNING/CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to th...
Page 3 - Important safeguards for you and your new product; S a f e t y I n s t r u c t i o n s
Owner’s Manual 3 Warning/Caution Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential elec-trical shock or fire hazards. To avoid defeating the safeguards that have been built into your...
Page 4 - be placed on the apparatus.; S a f e t y I n s t r u c t i o n s c o n t i n u e d
4 Plasma Monitor Safety Instructions 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination...
Page 5 - C o n t e n t s; After reading this manual, keep it handy for future reference.; Introduction
Owner’s Manual 5 Safety Instructions C o n t e n t s C o n t e n t s After reading this manual, keep it handy for future reference. Warning/Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 Introdu...
Page 6 - I n t r o d u c t i o n; 60° - Wide angle range of vision
6 Plasma Monitor Introduction I n t r o d u c t i o n I n t r o d u c t i o n What is a Plasma Display Panel (PDP)? If voltage is applied to gas within glass panels, ultraviolet rays are produced and fused with a fluorescent substance. At thatinstant, light is emitted. A Plasma Display is a next gen...
Page 7 - C o n t r o l s; F r o n t P a n e l C o n t r o l s; Remote Control Sensor
Owner’s Manual 7 Introduction C o n t r o l s C o n t r o l s F r o n t P a n e l C o n t r o l s F r o n t P a n e l C o n t r o l s - This is a simplified representation of a typical front panel. The Front Panel Controls shown here may be somewhat different from your monitor. MU-42/50PM10/11 serie...
Page 8 - C o n n e c t i o n O p t i o n s; REMOTE CONTROL; S-VIDEO INPUT SOCKETS; B a c k C o n n e c t i o n P a n e l
8 Plasma Monitor Introduction C o n n e c t i o n O p t i o n s C o n n e c t i o n O p t i o n s AC INPUT AUDIO INPUT RGB OUTPUT RGB INPUT DVI INPUT RS-232C INPUT (CONTROL/SERVICE) REMOTE CONTROL ( ) ( ) ( ) ( ) EXTERNAL SPEAKER R L R L AUDIO INPUT VIDEO INPUT AUDIO INPUT S-VIDEO Y P B P R (MONO) C...
Page 9 - I n s t a l l i n g B a t t e r i e s; R e m o t e C o n t r o l K e y F u n c t i o n s
Owner’s Manual 9 Introduction - When using the remote control, aim it at the remote control sensor on the monitor. - Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press the key again as necessary. 1 2 3 4 5 6 7 8 0 9 POWER SLEEP INPUT S...
Page 10 - I n s t a l l a t i o n; I n s t a l l a t i o n I n s t r u c t i o n s; GROUNDING
10 Plasma Monitor Installation I n s t a l l a t i o n I n s t a l l a t i o n Owner’s Manual 1.5V 1.5V Alkaline Batteries Power Cord Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealerwhere you purchased the product. I n...
Page 11 - D e s k t o p P e d e s t a l I n s t a l l a t i o n; I n s t a l l a t i o n I n s t r u c t i o n s c o n t i n u e d; a l l M o u n t I n s t a l l a t i o n
Owner’s Manual 11 Installation 4 inches 4 inches 2.36 inches 4 inches 2 inches D e s k t o p P e d e s t a l I n s t a l l a t i o n D e s k t o p P e d e s t a l I n s t a l l a t i o n For proper ventilation, allow a clearance of 4” on eachside and the top, 2.36” on the bottom, and 2” from thewall...
Page 12 - NOTE: All cables shown are not included with the Monitor; INPUT; V C R S e t u p; Connection Option; INPUT SELECT; C a b l e; VCR; E x t e r n a l E q u i p m e n t C o n n e c t i o n s
12 Plasma Monitor Installation NOTE: All cables shown are not included with the Monitor - To avoid picture noise (interference), leave an adequate distance between the VCR and monitor.- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long peri...
Page 13 - Component Input ports; How to connect; E x t e r n a l; DVD; or
Owner’s Manual 13 Installation • Component Input ports To get better picture quality, connect a DVD player to the compo-nent input ports as shown below. How to connect 1. Connect the provided BNC-RCA adapter to the monitor’s VIDEO INPUT. 2. Connect the audio and video cables from the external equipm...
Page 14 - DVI; D T V S e t u p
14 Plasma Monitor Installation How to connect Use the monitor’s COMPONENT (Y, P B , P R ) INPUT, RGB or DVI jack for video connections, depending on your set-top box connector. Then, makethe corresponding audio connections. How to use 1. Turn on the digital set-top box. (Refer to the owner’s manual ...
Page 15 - P C S e t u p; How to use; RGB
Owner’s Manual 15 Installation How to connect 1. To get the best picture quality, adjust the PC graphics card to 640x 480, 60Hz. 2. Use the Monitor’s RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections,depending on your PC connector. • If the graphic card on the PC does not ...
Page 16 - Monitor Display Specifications
16 Plasma Monitor Installation Resolution 640x350 720x400 640x480 800x600 848x480 Horizontal Frequency(KHz) 31.468 37.861 31.469 37.927 31.469 35.000 37.861 37.500 43.269 35.156 37.879 48.077 46.875 53.674 49.725 31.500 37.799 39.375 70.09 85.08 70.08 85.03 59.94 66.66 72.80 75.00 85.00 56.25 60.31 ...
Page 17 - M e n u L a n g u a g e S e l e c t i o n; O p e r a t i o n; u r n i n g o n t h e M o n i t o r; Turning on the Monitor just after installation
Owner’s Manual 17 Operation - The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use D / E button to select the SPECIAL menu. 2. Press the G button and then use D / E button to select Language . 3. Press the G button and then ...
Page 18 - P i c t u r e M e n u O p t i o n s; X D; Auto Color Temperature Control; C o l o r; Manual Color Temperature Control (; ACC; set to; Off
18 Plasma Monitor Operation P i c t u r e M e n u O p t i o n s P i c t u r e M e n u O p t i o n s - XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. - When selecting APC options (Daylight, Optimum and Nig...
Page 19 - M a n u a l P i c t u r e C o n t r o l (; APC; s e t t o
Owner’s Manual 19 Operation - You can adjust picture contrast, brightness, color, sharpness, and tint options to the levels you prefer. 1. Press the MENU button and then use D / E button to select the PICTURE menu. 2. Press the G button and then use D / E button to select the desired picture option ...
Page 20 - S o u n d M e n u O p t i o n s; DASP; D A S P; V L; MENU; B B E
20 Plasma Monitor Operation S o u n d M e n u O p t i o n s S o u n d M e n u O p t i o n s 1. Press the DASP button repeatedly to select the appropriate sound setup as shown below. D A S P D A S P ( D i g i t a l ( D i g i t a l A u t o S o u n d P r o c e s s i n g ) A u t o S o u n d P r o c e s ...
Page 21 - OK; M a n u a l S o u n d C o n t r o l (
Owner’s Manual 21 Operation 1. Press the MENU button and then use D / E button to select the SOUND menu. 2. Press the G button and then use D / E button to select the desired sound option ( Balance , Treble , Bass ) . 3. Press the G button and then use F / G button to make appropriate adjustments. 4...
Page 22 - i m e r M e n u O p t i o n s; i m e r S e t u p
22 Plasma Monitor Operation T T i m e r M e n u O p t i o n s i m e r M e n u O p t i o n s - Timer function operates only if current time has been set.- Off-Timer function overrides On-Timer function if they are set both set to the same time.- The Monitor must be in standby mode for the On-Timer to...
Page 23 - K e y L o c k; S p e c i a l M e n u O p t i o n s; I S M ( I m a g e S t i c k i n g M i n i m i z a t i o n ) M e t h o d
Owner’s Manual 23 Operation K e y L o c k K e y L o c k - The Monitor can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by locking out the front panel controls.- This MONITOR is programmed to remember which option it was las...
Page 24 - S p e c i a l M e n u O p t i o n s c o n t i n u e d; L o w P o w e r; M e n u R o t a t i o n f o r V
24 Plasma Monitor Operation S p e c i a l M e n u O p t i o n s c o n t i n u e d S p e c i a l M e n u O p t i o n s c o n t i n u e d L o w P o w e r L o w P o w e r - Low power reduces the plasma display power consumption. 1. Press the MENU button and then use D / E button to select the SPECIAL m...
Page 25 - S c r e e n M e n u O p t i o n s; A u t o; S e t t i n g P i c t u r e F o r m a t; ARC; S c r e e n P o s i t i o n
Owner’s Manual 25 Operation S c r e e n M e n u O p t i o n s S c r e e n M e n u O p t i o n s A u t o A u t o A d j u s t m e n t A d j u s t m e n t - RGB (PC) mode only; This function doesn’t work for RGB-DTV mode.- Automatically adjusts picture position and minimizes image shaking.- After adjus...
Page 27 - S c r e e n M e n u O p t i o n s c o n t i n u e d; L u m i n a n c e N o i s e R e d u c t i o n ( V; I n i t i a l i z i n g ( R e s e t t o o r i g i n a l f a c t o r y v a l u e ); SPLIT ZOOM
Owner’s Manual 27 Operation S c r e e n M e n u O p t i o n s c o n t i n u e d S c r e e n M e n u O p t i o n s c o n t i n u e d - Use YNR to reduce the picture noise that may appear on the screen. L u m i n a n c e N o i s e R e d u c t i o n ( V L u m i n a n c e N o i s e R e d u c t i o n ( V...
Page 28 - P I P
28 Plasma Monitor Operation - PIP lets you view 2 different inputs pictures (sources) on your Monitor screen at the same time. One source will be large, and the other source will show a smaller inset image. - Double Window mode splits the screen into 2, allowing 2 picture sources to be shown on the ...
Page 29 - y p e o f C o n n e c t o r D - S u b 9 - P i n M a l e; E x t e r n a l C o n t r o l D e v i c e S e t u p; R S - 2 3 2 C S e t u p; PC
Owner’s Manual 29 External Control Device Setup No. Pin name 1 No connection 2 RXD (Receive data) 3 TXD (Transmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 8 CTS (Clear to send) 9 No Connection 1 5 6 9 2354678 RXD TXD GND DTR DSR RTSCTS TXD RXD GND DSR DTR CTSRT...
Page 30 - S e t I D; r a n s m i s s i o n / R e c e i v i n g P r o t o c o l; C o m m a n d R e f e r e n c e L i s t
01. Power k a 00 ~ 01 02. Input Select k b 00 ~ 04 03. Aspect Ratio k c 00 ~ 03 04. Screen Mute k d 00 ~ 01 05. Volume Mute k e 00 ~ 01 06. Volume Control k f 00 ~ 64 07. Contrast k g 00 ~ 64 08. Brightness k h 00 ~ 64 09. Color k i 00 ~ 64 10. Tint k j 00 ~ 64 11. Sharpness k k 00 ~ 64 12. OSD Sele...
Page 31 - * Real data mapping 1
Owner’s Manual 31 External Control Device Setup 02. Input Select (Command2:b) (Main Picture Input) G To select input source for the Monitor. You can also select an input source using the INPUTSELECT button on the Monitor's remote control. Transmission Data 0 : RGB 1 : DVI2 : Component 3 : Video4 : S...
Page 32 - * Real data mapping 2
32 Plasma Monitor External Control Device Setup 17. Treble (Command2:r) G To adjust treble. You can also adjust treble in the Sound menu. Transmission Data Min: 0 ~ Max: 64 • Refer to ‘Real data mapping 1’. See page 31. [k][r][ ][Set ID][ ][Data][Cr] Acknowledgement [r][ ][Set ID][ ][OK][Data][x] 09...
Page 33 - * Real data mapping 3
Owner’s Manual 33 External Control Device Setup 21. Red Adjustment (Command2:v) G To adjust red in color temperature. Transmission Data Min: 0 ~ Max: 3C • Refer to ‘Real data mapping 3’ as shown right. [k][v][ ][Set ID][ ][Data][Cr] Acknowledgement [v][ ][Set ID][ ][OK][Data][x] 22. Green Adjustment...
Page 34 - Picture Size Setting for Double Window
34 Plasma Monitor External Control Device Setup 26. ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission Data 0: Normal 1: White wash 2: Orbiter3: Inversion [j][p][ ][Set ID][ ][Data][Cr] Acknowledgement [p][ ][Set ID][ ][OK][Data][x] 27. Low Power (Command2:q) G To...
Page 35 - H o w t o C o n n e c t; I R C o d e s
Owner’s Manual 35 IR Codes G Connect your wired remote control to the Remote Control port on the Monitor. G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz G Configuration of frame G Repeat code G Lead code • 1st frame Low custom code Lead code High custom code Data code Data...
Page 36 - Note
36 Plasma Monitor IR Codes Code (Hexa) Function Note 0001020308C4C509101112131415161718190B5AD8BFC6D50E43444D5260616364627B797677AF99 R/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C Button (Power On/Off)Discrete IR Code (Only Power On)Discrete IR Code (Only Power Off)R/C ButtonR/C ButtonR/C ButtonR/C Bu...
Page 37 - VOLUME; r o u b l e s h o o t i n g C h e c k l i s t
Owner’s Manual 37 Troubleshooting Checklist No output from one of the speakers • Adjust Balance in the Sound menu. (Refer to p.21) Unusual sound from inside the MONITOR • A change in ambient humidity or temperature may result in an unusual noise when the plasma display is turned on or off and does n...
Page 38 - P r o d u c t S p e c i f i c a t i o n s; C l e a n i n g t h e S c r e e n; M a i n t e n a n c e; MODELS
38 Plasma Monitor • The specifications shown above may be changed without notice for quality improvement. P r o d u c t S p e c i f i c a t i o n s P r o d u c t S p e c i f i c a t i o n s Maintenance & Specification 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft...
Page 39 - PLASMA DISPLAY PANEL — U.S. LIMITED WARRANTY; CONCERNING PIXEL FUNCTIONALITY:; LABOR and PARTS: 2 YEARS; EFFECTIVE DATE OF WARRANTY:; HOW SERVICE IS HANDLED:
Your LG Plasma Display Panel will be repaired or replaced in accordance with the terms of this warranty, at LGE’soption, if it proves to be defective in material or workmanship under normal use, during the warranty period(“Warranty Period”) listed below, effective from the date (“Date of Purchase”) ...
Page 40 - TO CONTACT THE LGE CUSTOMER SERVICE CENTER BY MAIL:; chase or the date of original installation available.; CUSTOMER INTERACTIVE CENTER NUMBERS:
a P/N : 3828VA0520B TO CONTACT THE LGE CUSTOMER SERVICE CENTER BY MAIL: LGE Customer Interactive Center P.O. Box 240007 201 James Record Road Huntsville, Alabama 35824 http://www.lgservice.com FOR SERVICE: Before you call for warranty service, check your operating guide – you may avoid a service cal...
