Page 2 - Table of Contents
2 Table of Contents Accessories 3 Connecting the Stand 4 Connecting the Speakers 5 Portrait Mode 6 Using the Remote Control 7 Part Names and Functions 9 Connecting to External Devices 10 Connecting to Your PC ..............................................................................................
Page 3 - Included Accessories; Accessories
3 NC2000 Kit ❖ Applicable only for models that support the NC2000. Optional accessories are subject to change without prior notice to improve the performance of the set. New optional accessories may be added periodically. ❖ Optional accessories (purchased separately) may vary depending on the model....
Page 4 - Connecting the Stand; Parts
4 Connecting the Stand First, check if the following parts are all present. Parts Take the parts for the stand out of the box and assemble them as shown in the picture. Place a soft cloth on a table and place the set screen side down upon the table. Connect the stand as shown below. Use the screws t...
Page 5 - Connecting the Speakers; When the speakers are installed.; Cable holder; Cable ties
5 Connecting the Speakers Attach the speakers to the set using screws as shown below. Then, connect the speaker cable. When the speakers are installed. *Connect the input terminal with the proper color match. Remove the paper. Cable holder After installing your speakers, use holders and cable ties t...
Page 6 - Portrait Mode
6 Portrait Mode "When installing in portrait mode, rotate the set clockwise." - Only on some models.
Page 7 - Using the Remote Control; Remote Control Buttons
7 Using the Remote Control Remote Control Buttons 1 2 5 3 4 7 6 9 8 13 12 11 10 P A G E INPUT ENERGY SAVING MARK ARC ON OFF . , ! ABC DFG GHI JKL MNO PQRS TUV 1/a/A - * # WXYZ CLEAR OK S.MENU MONITOR PSM AUTO MUTE BRIGHT NESS MENU ID BACK TILE ON OFF EXIT 1 2 5 4 7 6 9 8 13 12 11 10 3 POWER On / Off...
Page 8 - Inserting Batteries into the Remote Control
8 ENERGY SAVING Button - Adjusts the Energy Saving mode of the set. INPUT Select Button Accesses the Input Signal Window. Selects the signal type you want using ◄ ►. CLEAR Button - Deletes the numbers and letters you typed (SuperSign input only). ARC Button - Selects the Aspect Ratio mode. BRIGHTNES...
Page 9 - Part Names and Functions; Rear View; Connect the power cord.
9 Part Names and Functions Rear View * LINE OUTA terminal that is used to connect to the speaker including a built-in amplifier (amp).Check the connecting terminal of the PC sound card before connecting. If the Audio Out of the PC sound card only has a Speaker Out jack, reduce the PC volume. If the ...
Page 10 - Connecting to External Devices; Connecting to Your PC
10 Check that the computer, monitor and the peripherals are turned off. Then, connect the signal input cable. Connecting with a D-Sub Signal Input Cable.Connecting with an HDMI-DVI Signal Input Cable (not included) * When HDMI PC is used, a compatibility problem may occur. MAC Macintosh Adapter (not...
Page 11 - INPUT → ◄ ► → OK; SOURCE →◄ ► → AUTO/SET
11 Select an input signal. Press INPUT on the remote control to select the input signal. Or, press SOURCE on the bottom of the set. • Connecting two computers. Connect the signal cables (HDMI-DVI and D-Sub) to each computer. Press INPUT on the remote control to select the computer to use. • Connect ...
Page 12 - Connect the LAN cable as shown below.; Using the LAN
12 • Using a LAN establishes communication between your PC and the set and enables use of the OSD menus on the PC as well as the set. Note Connecting to External Devices Connect the LAN cable as shown below. Connect the LAN cable and install the eZ-Net Manager program on the CD-ROM. For more informa...
Page 13 - Daisy Chaining Set
13 Using RGB Input Using AV Input To use different set connected to each other, connect one end of the signal input cable (15-pin D-Sub signal cable) to the RGB OUT connector of set 1 and connect the other end to the RGB IN connector of other set. Connecting to External Devices Set 1 Set 1 Set 2 Set...
Page 14 - Kensington Security Slot; The set is equipped with a Kensington; VESA FDMI Wall Mounting
14 Kensington Security Slot The set is equipped with a Kensington Security System connector on the back panel. The cable and lock are available separately and are not sold by LG. For more info, visit http://www.kensington. com. This set supports a VESA FDMI compliant mounting interface. These mounts...
Page 15 - Cable Management; Cable; Hold the Cable management with both hands; Arrange the cables in the center as shown in the following picture.
15 Note Connecting to External Devices Cable Management - Only on some models. Cable Management Hold the Cable management with both hands and pull it downward. Removing the cable guide. • Do not use the cable management as a handle for the Monitor. Arrange the cables in the center as shown in the fo...
Page 16 - Video Input
16 Connecting to External Devices Connecting with a BNC Cable Select AV . Connect the video cable as shown below and then connect the power cord (see page 10). Connecting with a BNC Cable • Connect the input terminal with a proper color match. BNC Cable(not included) Set VCR/DVD Receiver Select an i...
Page 18 - on the remote control to select the input signal.; SOURCE; on the bottom of the set.; Select
18 Connect the AV cable as shown below and connect the power cord (see page 10). RCA-PC Audio Cable (not included) VCR/DVD/Set-top Box HDMI-DVI Signal Cable(not included) VCR/DVD/Set-top Box Select an input signal. Press INPUT on the remote control to select the input signal. Or, press SOURCE on the...
Page 19 - User Menus; Screen Adjustment Options; Power Button; ◄ ► Adjusts the volume.; MENU Button; Selects an icon or adjusts the setting in the OSD menu.; Adjust Button
19 User Menus Screen Adjustment Options Turns the set on/off. This Indicator lights up green when the set is operating normally (on mode). If the set is in sleep mode (Energy Saving), the indicator color changes to amber. Power Button ◄ ► Adjusts the volume. ▲ ▼ Adjusts up and down. Shows/hides the ...
Page 20 - The sensor from which the set receives signals from the; Component; SuperSign; SOURCE Button; SOURCE → ◄ ► → AUTO/SET; [When XGA Mode is active and
20 User Menus The sensor from which the set receives signals from the remote control. Screen Adjustment Options [For PC Analog signal] AUTO/SET Button AV Composite Video Component HDTV, DVD RGB 15-pin D-Sub analog signal HDMI/DVI Digital signal SuperSign SupeSign - Toggles between inputs SOURCE Butt...
Page 21 - OSD Menu; Icon
21 OSD Menu Note OSD (On-Screen Display) • The OSD function enables you to adjust the screen status conveniently since it provides graphical menu representation. User Menus Icon Function Description Adjusts the audio. Adjusts screen brightness, contrast and color to your preference. Adjusts the scre...
Page 22 - Use the remote control to adjust the OSD.; Adjusting the Screen Automatically; Use ▲▼◄ ► to adjust the item to the desired level.
22 User Menus Adjusting the OSD (On-Screen Display) • Use the remote control to adjust the OSD. Adjusting the Screen Automatically Press AUTO/SET (AUTO on the remote Control) when viewing a PC analog signal. The optimal screen settings will be selected that suit the current mode. If adjustments are ...
Page 23 - Adjusting Screen Color; PICTURE; To select the image size of the screen.
23 User Menus Adjusting Screen Color Aspect Ratio Move OK PICTURE Aspect Ratio : 16:9 ꕫ Energy Saving : Off Picture Mode : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 ▼ Aspect Ratio : 16:9 ꔋ 16:9Just scanOriginal4:314:9ZoomCinena Zoom 1Full Wide 16:9 ꔋ To select t...
Page 24 - Energy Saving; The screen brightness adjusting menu helps you save energy.
24 Move OK PICTURE Aspect Ratio : 16:9 ꕫ Energy Saving : Off Picture Mode : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 ▼ ꕫ Energy Saving : Off ꔋ User Menus Adjusting Screen Color Energy Saving OffLevel 1Level 2Level 3 Off ꔋ The screen brightness adjusting menu he...
Page 25 - Picture Mode
25 Adjusting Screen Color User Menus Picture Mode Move OK PICTURE Aspect Ratio : 16:9 ꕫ Energy Saving : Off Picture Mode : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 ▼ Picture Mode : Standard ꔋ VividStandardCinemaSportGameExpert 1Expert 2 Standard ꔋ The picture m...
Page 26 - Adjusts the brightness of LCD panel.
26 User Menus Move OK PICTURE Aspect Ratio : 16:9 ꕫ Energy Saving : Off Picture Mode : Standard (User) • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 ▼ • Backlight 70 ꔋ Backlight: Adjusts the brightness of LCD panel. Contrast: Adjusts the difference between light and dark lev...
Page 27 - Gamma
27 User Menus Move OK PICTURE ▲ • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 • Tint 0 • Advanced Control • Picture Reset Screen • Advanced Control ꔋ High Medium High Medium High Off Color TemperatureDynamic ContrastDynamic ColorNoise ReductionGammaBlack LevelFilm Mode Close ◄ Medium ► Adj...
Page 28 - Picture Reset; Adjusts the screen video.
28 User Menus Move OK PICTURE ▲ • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 • Tint 0 • Advanced Control • Picture Reset Screen • Picture Reset ꔋ Move OK PICTURE ▲ • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 • Tint 0 • Advanced Control • Picture Reset Screen Screen ꔋ Adjusting...
Page 29 - Adjusting Audio; AUDIO
29 Adjusting Audio User Menus Move AUDIO Auto Volume : Off Clear Voice II : Off • Level 3 Balance 0 Sound Mode : Standard • Treble 50 • Bass 50 • Reset ▼ OK Auto Volume : Off ꔋ Auto Volume Automatically adjusts uneven sound volumes across all channels or signals to the most appropriate level. To use...
Page 30 - Adjusting the Timer; TIME
30 Adjusting the Timer User Menus Move TIME OK ClockOff Time : Off On Time : Off Sleep Timer : Off Auto Off : On Power On Delay : Off Clock ꔋ Clock If the current time is incorrect, reset the clock manually. 1) Press MENU button and then use ▼▲ button to select the Time menu. 2) Press ► and then use...
Page 31 - OPTION; Use ▼▲ to select; Selecting Options
31 User Menus Move OPTION OK Language : English Input Label Key Lock : Off Set ID : Off ISM Method : Normal DPM Select : On Power Indicator : ON Logo Light : ON ▼ Language : English ꔋ Language Chooses the language in which the control names are displayed. Input Label Selects a label for each input s...
Page 33 - - Tile Mode works with several set to enlarge; Screen Tiling Options; Column; TILE
33 Select Tile Mode and choose Tile alignment and set the ID of the current set to set the location. Only after pressing OK will the adjustments be saved. - Must be displayed with various other set. - Must be in a function that can be connected to RS-232C or RGB Out. - Tile Mode works with several s...
Page 34 - Select the location of the Tile by setting an ID.
34 - Tile Mode (set 1 to 2): c(2) x r(1) - Tile Mode (set 1 to 9): c(3) x r(3) - Tile Mode (set 1 to 16): c(4) x r(4) User Menus Row Column ID 1 ID 2 ID 4 ID 5 ID 6 ID 7 ID 8 ID 9 ID 3 Tile ID: Select the location of the Tile by setting an ID. Natural: Omits the distance between the screens allowing...
Page 35 - USB Options; Connecting USB Devices; Photo List; or; Movie List; Connect the USB device to the; USB
35 User Menus USB Options Connecting USB Devices When you connect a USB device, this pop-up menu is displayed, automatically. The pop-up menu will not be displayed while the OSD, EPG or Schedule list is displayed. When the pop-up menu appears, you can select Music List, Photo List or Movie List in t...
Page 36 - Precautions when using the USB device
36 User Menus USB Options Precautions when using the USB device • Only a USB storage device is recognizable. • If the USB storage device is connected through a USB hub, the device is not recognizable. • A USB storage device using an automatic recognition program may not be recognized. • A USB storag...
Page 37 - Screen Components
37 User Menus USB Options You can view photo files on USB storage devices.The On-Screen Display may be different from your set. Images are an example to assist with set operation. Supported JPG Photo File TypesBaseline: 15360 x 8640Progressive: 1024 x 768 • You can view JPG files only.• Non-supporte...
Page 38 - Photo Selection and Pop-Up Menu; Displays the selected item.
38 User Menus USB Options Photo Selection and Pop-Up Menu ➩ View: Displays the selected item. Mark All: Marks all photos on the screen. Unmark All: Deselects all marked photos. Delete: Deletes the selected photo. Close: Closes the pop-up menu. Photo List Page 2/3 Drive1 JMJ001 1366x768, 125KB Up Fol...
Page 39 - Viewing Photos; to move to the previous
39 User Menus USB Options ◄ 1/17 ► Slideshow ◘ BGM ◘ Delete Option Hide ꘤ ► Slideshow When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show. • Set the time interval of the slide show in O...
Page 40 - Music List
40 User Menus You can play music files stored on USB storage devices. Purchased music files (*.MP3) may have copyright restrictions. Playback of these files may not be supported by this set. The On-Screen Display may be different from your set. Images are an example to assist with set operation. Sup...
Page 41 - Music Selection and Pop-Up Menu
41 Music Selection and Pop-Up Menu ➩ Up to 6 music files are listed per page. Play (During stop): Plays the selected music files. When playback of a file stops, the next selected file will be played. When there are no selected music files left to play, the next file in the current folder will be pla...
Page 42 - What is the ‘; Screen Saver
42 Music S003 0:27 / 3:67 If you don't press any button for a while during playback, the play information box (as shown below) will display as a screen saver. What is the ‘ Screen Saver ’? The screen saver prevents screen pixel damage due to a fixed image remaining on the screen for an extended peri...
Page 45 - Movie Selection and Pop-Up Menu; Plays the selected movie. DivXplay is
45 Movie Selection and Pop-Up Menu ➩ Play: Plays the selected movie. DivXplay is executed while the screen changes. Mark All: Marks all movies in the folder. Unmark All : Deselect all marked movies. Delete: Deletes the selected movie. Close: Closes the pop-up menu. User Menus USB Options • If a file...
Page 46 - Using the remote control
46 Using the remote control ◄◄ / ►► When playing, repeatedly, press REW (◄◄) to speed up ◄◄(x2) -> ◄◄◄ (x4) -> ◄◄◄◄(x8) -> ◄◄◄◄◄(x16) ->◄◄◄◄◄◄(x32). Repeatedly, press FF (►►) to speed up ►►(x2)-> ►►► (x4) -> ►►►► (x8) -> ►►►►►(x16) -> ►►►►►►(x32). Pressing these buttons repea...
Page 47 - DivX Registration Code
47 User Menus Move USB OK Photo ListMusic ListMovie ListDivX Reg. CodeDeactivation DivXReg. Code ꔋ USB Options • Supported Movie File Types Resolution: under 25 frames/sec (720x576 WxH pixels). Frame rate : under 30 frames/sec (720x480) • Video Codec: MPEG1, MPEG2, MPEG4 (doesn’t support Microsoft M...
Page 48 - Deactivation
48 Move USB OK Photo ListMusic ListMovie ListDivX Reg. CodeDeactivation Deactivation ꔋ Deactivation Deactivating devices allows users who have activated all the available devices through the web server and are blocked from activating more devices. DivX VOD allows the consumer to activate up to 6 dev...
Page 49 - Troubleshooting; * Maximum Resolution; No Image is Displayed; 'Unknown Set' Message Appears When the Television is Connected
49 Troubleshooting • See if the power cord is properly connected to the outlet. • See if the power switch is turned on. • May need service. • Adjust brightness and contrast again. • Backlight may need repair. • If the set is in power saving mode, move the mouse or press any key. • Turn both devices ...
Page 50 - The Screen Image Looks Abnormal; • D-Sub analog signal - Press AUTO on the; Ghost Image Appears on the Screen; Vertical frequency:; Horizontal frequency:
50 Troubleshooting ● Is the screen position wrong? ● Do thin lines appear in the background? ● Horizontal noise appears or the characters look blurred. ● The screen is displayed abnormally. The Screen Image Looks Abnormal • D-Sub analog signal - Press AUTO on the remote control to automatically sele...
Page 51 - Screen has poor color resolution; The Audio Does Not Work
51 Troubleshooting • Set the number of colors to more than 24 bits (true color) Select Control Panel - Display - Settings - Color Table menu in Windows. • Check the connection status of the signal cable. Or, re-insert the PC video card. • Several pixels (red, green, white or black color) may appear ...
Page 52 - Specifications; LCD Panel; Dimensions; Rated Voltage; Width x Height x Depth; Net
52 Specifications Note • The specifications shown above may be changed without prior notice for quality improvement. LCD Panel Power Dimensions & Weight 106.73 cm ( 42.02 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) PanelVisible diagonal size : 106.73 cm0.4845 mm x 0.4845 mm X R...
Page 53 - Video Signal; Audio
53 Max. Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Horizontal F...
Page 54 - PC Mode - Preset Mode; Preset mode
54 Mode Set On Mode Sleep Mode Off Mode Blue Amber - 1 to 17: RGB mode *: HDMI/DVI mode Component 480i o x 576i o x 480p o o 576p o o 720p o o 1080i o o 1080p o o HDMI/DVI (DTV) Specifications PC Mode - Preset Mode DTV Mode Power Indicator Note • DTV/PC selection on HDMI/DVI inputs is available for ...
Page 55 - Controlling Multiple Set; Connecting the Cable; Connect the RS-232C cable as shown below.; Communication Parameters
RS-232C A1 Controlling Multiple Set Connecting the Cable Connect the RS-232C cable as shown below. You need to purchase a cable separately to connect to the RS-232C socket. RS-232C protocol is used for communication between the PC and set. You can turn the set on/off, select an input source or adjus...
Page 56 - Command Reference List
Controlling Multiple Set RS-232C A2 COMMAND 1 COMMAND 2 DATA1 DATA2 DATA3 Command Reference List k a 00H to 01H k b 02H to 09H k c 01H to 1FH k d 00H to 01H k e 00H to 01H k f 00H to 64H k g 00H to 64H k h 00H to 64H k i 00H to 64H k j 00H to 64H k k 00H to 64H k l 00H to 01H k m 00H to 01H k t 00H ...
Page 58 - Transmission / Receiving Protocol
Controlling Multiple Set RS-232C A4 OK Acknowledgement * The Set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. Err...
Page 67 - To adjust picture position and minimize image shaking; To send IR remote key code.
Controlling Multiple Set RS-232C A13 18. Auto Configure(Command: j u) ► To adjust picture position and minimize image shaking automatically. it works only in RGB(PC) mode. Transmission Data 1: To setAcknowledgement Transmission / Receiving Protocol 19. Key(Command: m c) ► To send IR remote key code....
Page 68 - Transmission
Controlling Multiple Set RS-232C A14 20. Tile Mode(Command: d d) ► Change a Tile Mode. Transmission * The data can not be set to 0X or X0 except 00. Acknowledgement Transmission / Receiving Protocol Data Description 00 or 11 Tile mode is off. 12 1 x 2 mode(column x row) 13 1 x 3 mode 14 1 x 4 mode ....
Page 72 - Mode
Controlling Multiple Set RS-232C A18 A18 Transmission / Receiving Protocol 28. Sound Mode (Command: d y ) ► To adjust the Sound mode. Transmission Data Structure Acknowledgement Data(Hex) 01 02 03 04 05 Mode Standard Music Cinema sport Game 29. Fan Fault check (Command: d w ) ► To check the Fan faul...
Page 74 - Automatically adjust the volume level.
Controlling Multiple Set RS-232C A20 33. Auto volume (Command: d u) ► Automatically adjust the volume level. Transmission Data 0: Off 1: OnAcknowledgement 34. Speaker (Command: d v) ► Turn the speaker on or off. Transmission Data 0: Off 1: On Acknowledgement Transmission / Receiving Protocol [d][u][...
Page 75 - Set the current time.
Controlling Multiple Set RS-232C A21 35. Time (Command: f a) ► Set the current time. Transmission [Data1] 0: Monday 1: Tuesday 2: Wednesday 3: Thursday 4: Friday 5: Saturday 6: Sunday [Data2] 0H to 17H (Hours) [Data3] 00H to 3BH (Minutes) Acknowledgement *When reading data, FFH is inputted for [Data...
Page 76 - e0: delete all indexes of On Time List
Controlling Multiple Set RS-232C A22 Transmission / Receiving Protocol Transmission [Data1] 1. f1h to f4h(read one index) f1: read 1st index of On Time List, f2: read 2nd index of On Time List f3: read 3rd index of On Time List f4: read 4th index of On Time List 2. e1h~e4h(delete one index), e0h(del...
Page 85 - IR Codes; Remote Control IR Code
IR Codes RS-232C A31 Remote Control IR Code The output waveform is single pulse, modulated with a 37.917kHz signal at 455kHz. ► Configuration of Frame T1 Tc ▪ Repeat Frame Tf Repeat code ► Lead Code ► Repeat Code ► Bit Description 2.25 ms 9 ms 0.55ms ► Frame Interval: Tf Tf Tf Tf = 108 ms @ 455 kHz ...
Page 86 - MONITOR OFF
IR Codes RS-232C A32 Code(Hex) Function Note UP( ▲ ) DOWN( ▼ ) RIGHT( ► ) LEFT( ◄ ) POWER ON/OFFMONITOR ON MONITOR OFF MUTEEnergy SavingINPUT MENU EXIT PSMOK Number Key 0Number Key 1Number Key 2Number Key 3Number Key 4Number Key 5Number Key 6Number Key 7Number Key 8Number Key 9ARC(MARK) Vol+Vol- 404...
Page 87 - Cinena; ZOOM
IR Codes RS-232C A33 Code(Hex) Function Note E0E12899 727163617BB0B1BA8F8E5A BF D5 C6 76 77 AF R/C ButtonR/C ButtonR/C ButtonR/C Button(Discrete IR Code)R/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonDiscrete IR Code(Input AV Selection)Discrete IR...
Page 88 - Important; MODEL; Temporary noise is normal when powering
WARNING -This is a class A monitor. In a do- mestic environment this monitor may cause radio interference in which case the user may be required to take adequate measures. Warranty void if removed. Important WARRANTY VOID IF REMOVED 3850TAZ209Y Make sure to read the Safety Precautions before using t...
