Page 2 - FCC NOTICE; • A Class A digital device; Warning
DLP PROJECTOR DLP PROJECTOR FCC NOTICE • A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pur-suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference when the eq...
Page 3 - Contents; Video Menu Options
Contents 3 Contents Introduction Safety Instructions ..........................................4-6 Names of parts Main Body .......................................................7Connecting Part ..............................................7Control Panel ..............................................
Page 4 - Safety Instructions; Safety Instructions are given in two forms as detailed below.; WARNING; WARNING; WARNING; Power; WARNING; Indoor Installation; NOTES; Earth wire should be connected.
Safety Instructions 4 Safety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector. ➟ Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death. N...
Page 5 - ENGLISH; CAUTION concerning the Power Cord; Do not use too many plugs on the Mains multi-outlet.
Safety Instructions 5 ENGLISH Using WARNING Do not place anything containingliquid on top of the projector suchas flowerpot, cup, cosmetics orcandle. This may cause a fire hazard ! In case of impact shock or dam-age to the projector switch it offand unplug it from the mains out-let and contact your ...
Page 7 - Names of parts; Main Body
Names of parts 7 ENGLISH Names of parts Main Body Connecting Part AU TO SO UR CE PO WER VO L VO L MEN U OK Indicators Front remote control sensor Power button Foot adjusting button Foot adjusting button Rear remote control sensor Control panel * The projector is manufactured using high-precision tec...
Page 8 - Control Panel; OK Button
Names of parts 8 Control Panel AUTO SOURCE POWER MENU KEYSTONE KEYSTONE OK POWER Button / , KEYSTONE+/- Button MENU Button Selects or closes menus. AUTO Button / Button Adjusts functions of menus. SOURCE Button Switches to RGB, DVI, Video,S-Video mode. A OK Button Checks present mode and saves the c...
Page 9 - Remote Control
Names of parts 9 ENGLISH Remote Control Installing Batteries • Open the battery compartment cover on the back of the remote control and insert the batteries with correct polarity,match “+” with “+”, and match “-” with “-”. • Install two 1.5V “AAA” batteries. Don’t mix used batteries with new batteri...
Page 10 - Projector Status Indicators
Names of parts 10 * Lamp Indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector. AU TO SOU RC E PO WER VOL VO L MEN U OK Lamp Indicator Temperature Indicator Operation Indicator Projector Status Indicators Operation In...
Page 11 - Accessories
Names of parts 11 ENGLISH Accessories Optional Extras POWER MENU SOURCE AUTO BLANK ARC STILL OK KEYSTONE KEYSTONE LASER * Contact your dealer to purchase these items.* When applying a ceiling installer, use only the ceiling installer for projector.* Contact your service personnel for replacing a new...
Page 12 - Installing and Composition; Installation and Composition; Provide proper ventilation for this projector.; This may cause overheating of the projector.; If there is no input signal, the Menu will not be displayed on screen.; Installation Instructions
Installing and Composition 12 Installation and Composition Provide proper ventilation for this projector. ● The projector is equipped with ventilation holes(intake)on the bottom and ventilation holes(exhaust) on the front.do not block or place anything near these holes, or internalheat build-up may ...
Page 13 - screen determines the actual size of the image.; projection distance based on the picture format; Basic Operation of the Projector
Installing and Composition 13 ENGLISH 1. Place the projector on a sturdy and horizontal surface with the PC or AV source. 2. Place the projector the correct distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3. Position the projector ...
Page 14 - , the internet homepage of the; Using Kensington Security System
Installing and Composition 14 ● The projector has a ‘Kensington’ Security System Connector on the back panel. Connect the ‘Kensington’Security system cable as below. ● For the detailed installation and use of the Kensington Security System, refer to the user’s guide attachedto the Kensington Securit...
Page 15 - Turning on the Projector; Remove the lens cover of the projector.; button on the remote control or top cover.; button on the top cover or remote control.; button on the top cover or remote control again to cut off the power.
Installing and Composition 15 ENGLISH * Don’t unplug the power cord while the ventilation fan (inlet/outlet) is working. If so, you take longer time by lamp on. Turning on the Projector Turning off the Projector 1. Connect power cord correctly. 2. Remove the lens cover of the projector. 3. Press the...
Page 16 - Focus ring; Focus and Position of the Screen Image; SOURCE; Each press of the
Installing and Composition 16 1. While pressing the foot adjuster button, raise or lower the projector to place the screen image in the proper position.2. Release the button to lock the foot in its new position.3. To fine-tune the height of the projector, rotate the front foot to raise or lower it. ...
Page 17 - Connection; Connecting to a Desktop PC; Connecting to a Notebook PC; DVI Input
Connection 17 ENGLISH Connection Connecting to a Desktop PC * You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output. * You can use ARC function for the RGB signals of the Aspect Ration 4:3. (For HD wide input signals, you cannot use ARC function.)* Fundamentally, HD wide inpu...
Page 18 - connect it to the projector.
Connection 18 Connecting to a Video Source < How to connect 1 > a. Connect the Video input jacks of the projector to the output jacks of the A/V source with Video cable. < How to connect 2 > b. Connect the S-Video input jack of the projector to the S-Video output jack of an A/V source wi...
Page 19 - Function; MENU; Adjusting Video; MENU; APC
Function 19 ENGLISH Function Video Menu Options * In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just example to help with the Projector operation. * If there is no input signal present, the Menu will not be displayed on the screen.* This operating gu...
Page 20 - ACC; Auto Color Temperature Control; Gamma; Gamma Function; White Peaking; White Peaking Function
Function 20 1. Press the MENU button and then use F , G button to select the menu. 2. Press the OK ( A ) button and then use D , E button to select ACC item. 3. Press the F , G button to make appropriate adjustments. Auto Color Temperature Control ● Each press of the F , G button changes the screen ...
Page 21 - Special Menu Options; Language; Selecting language; Flip Horizontal; Flip Horizontal Function; Flip Vertical; Flip Vertical Function
Function 21 ENGLISH Special Menu Options MENU prev. move F G select Language ARC Flip Horizontal Flip Vertical Set ID F G 1. Press the MENU button and then use F , G button to select the menu. 2. Press the OK ( A ) button and then use D , E button to select Language item. 3. Press the F , G button t...
Page 22 - Auto Source; Auto Source Function; * Use this function when the screen is not at a right angle to the; Keystone; function when you can’t get the best; ARC; Using ARC Function
Function 22 Special Menu Options MENU prev. move F G select Keystone 0 Auto Source Blank Image Lamp Mode Lamp Time 0 Hr F G 1. Press the MENU button and then use F , G button to select the menu. 2. Press the OK ( A ) button and then use D , E button to select Auto Source item. 3. Press the F , G but...
Page 23 - BLANK; Using Blank function; Blank Image; Selecting Blank Image color; Lamp Mode; Lamp Mode Function
Function 23 ENGLISH 1. Press the BLANK button. ● The screen turns off to a background color. ● You can choose the background color. (Refer to ‘Selecting blank image color’ ) 2. Press any button to cancel the blank function. Using Blank function * This function may be effective if you need to get att...
Page 24 - button and then use; Checking lamp time; STILL; Using Still function
Function 24 MENU prev. move F G adjust Keystone 0 Auto Source Blank Image Lamp Mode Lamp Time 0 Hr F G 1. Press the MENU button and then use F , G button to select the menu. ● The used lamp time is displayed. ● When projector lamp is reaching the end of its life (over 2000 hours), the lamp indicator...
Page 25 - Screen Position; or; Clock / Phase Function; AUTO; Auto Tracking Function; Screen Menu Options
Function 25 ENGLISH 1. Press the MENU button and then use F , G button to select the menu. 2. Press the OK ( A ) button and then use D , E button to select Horizontal or Vertical item. 3. Press the F , G button to adjust the screen condition as you want. ● Horizontal , Vertical are adjusted from -50...
Page 26 - External Control Device Setup; SET ID; ) button and then use; button to adjust Set ID to select the desired projector ID number.; Communication Parameter Setup
RS-232C 26 External Control Device Setup SET ID How to connect external control equipment * Connect the RS-232C input jack to an external control device (such as a computer or a video control system) and control the Projector’s functions externally. MENU prev. move F G select Language ARC Flip Horiz...
Page 27 - Command Reference List; Communication Protocol
RS-232C 27 ENGLISH Command Reference List 1. Transmission * [Command 1] : First command to control the set.(k, j, x, ASCII code, 1 Character) * [Command 2] : Second command to control the set..(ASCII code, 1 Character) * [Set ID] : You can adjust the set ID to choose desired projector ID number in s...
Page 28 - External control device setup
RS-232C 28 External control device setup 05. Contrast (Command2:g) ➜ To adjust screen contrast. Transmission Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. Data Min : 0 ~ Max : 64 [k] [g] [ ] [Set ID] [ ] [Data] [Cr] [g] [ ] [Set ID] [ ] [OK] [Data] [x] Ack 01. Power (Command2:a) ➜ To con...
Page 31 - Information; Supported Monitor Display; Signal
Information 31 ENGLISH Supported Monitor Display Component-*1 RGB(DTV)-*2 Signal <DVD/DTV Input> * Cable type1- RCA to D-Sub Adaptor2- Computer Cable NTSC(60Hz) 480i 480p 720p 1080i PAL(50Hz) 576i 576p 1080i O O O O O O O X O O O X O O Sources Format Vertical Freq.(Hz) Horizontal Freq. (kHz) V...
Page 32 - Maintenance; Cleaning the lens
Information 32 Maintenance Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface of it. Wipe the lens surface gently with an air spray or a soft, dry lint-free cloth. To remove dirt or stains on the lens, moisten a soft cloth with water and a neutral detergent and wipe the...
Page 33 - Memo
Page 35 - Specifications; Operating Condition
Information 35 Specifications Operating Condition Projector Lamp MODEL resolution horizontal / vertical ratio DLP panel size screen size remote control distance zoom ratio Video compatibility Power height(mm/inches) breadth(mm/inches) length(mm/inches) 1024(Horizontal) x 768(Vertical)pixel 4:3(horiz...
Page 36 - OWNER’S MANUAL; LG DLP PROJECTOR; Model number
BX220-JD OWNER’S MANUAL LG DLP PROJECTOR LG DLP PROJECTOR Please read this manual carefully before operatingyour set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the bottom of the set andquote this information to your dealer when yourequ...
