LG 75UM6970PUB - User Manual

Page 2 - Important Safety Instruction

2 ENGLISH Important Safety Instruction • Read these instructions.• Keep these instructions.• Heed all warnings. • Follow all instructions.• Do not use this apparatus near water.• Clean only with dry cloth.• Do not block any ventilation openings. Install in accordance with the manufacturer’s i...

Page 3 - Warning! Safety Instructions

3 ENGLISH Warning! Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsula...

Page 5 - Preparing; Optional Extras; Magic Remote Control

5 ENGLISH Preparing • When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. • Image shown may differ from your TV.• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. • Th...

Page 6 - Lifting and moving the TV

6 ENGLISH Model 60/65UM69* 60/65UM71* 60UM72* 65UM73* 65UM74* 65UM76* 70/75UM69* 70/75UM71* 70UM73* 75/82/86UM75* 75/82/86UM80* VESA (A x B) (mm) 300 x 300 600 x 400 Standard screw M6 M8 Number of screws 4 4 Wall mount bracket (optional) OLW480B LSW640B Lifting and moving the TV When moving or lifti...

Page 7 - Securing TV to the Wall; Mounting to the Wall

7 ENGLISH • Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.) • If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, whi...

Page 8 - Connections; Other connections

8 ENGLISH • When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects, (Depending upon model). Stand hole Connections You can connect various external devices to the TV. For more information on external devic...

Page 9 - Using Button; Basic functions

9 ENGLISH (Only UHD models) • → ( ) → [Picture] → [Additional Settings] → [HDMI ULTRA HD Deep Color] - On: Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0) - Off: Support 4K @ 60 Hz 8 bit (4:2:0) If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be c...

Page 10 - Using Remote Control

10 ENGLISH Using Remote Control (Depending upon model)The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to th...

Page 11 - Using Magic Remote Control

11 ENGLISH Using Magic Remote Control (Depending upon model)The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. When the message [Magic remote battery is low. Please change the battery.] is displayed, replace the...

Page 12 - Registering Magic Remote Control; User Guide

12 ENGLISH Registering Magic Remote Control How to register the Magic Remote Control To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on.2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control. * If the T...

Page 14 - Specifications

14 ENGLISH Specifications Product specifications may be changed without prior notice due to upgrade of product functions.Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).The actual energy consumption depe...

Page 16 - Regulatory

16 ENGLISH Regulatory - - - - Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com . In addition to the sou...

Page 17 - NOTE TO CABLE/TV INSTALLER

17 ENGLISH (1) (2) (3) (4) NOTE TO CABLE/TV INSTALLER (For USA and Canada)This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines f...

Page 18 - Symbols

18 ENGLISH WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of ...

Page 19 - THE CONSUMER TECHNOLOGY INDUSTRY CARES; PROPER TELEVISION PLACEMENT MATTERS; TUNE IN TO SAFETY; WALL OR CEILING MOUNT YOUR TELEVISION; MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

19 ENGLISH THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or install...

Page 21 - Network Settings; SMART TV Quick Setup Guide

Network Settings 1 Press the (Settings) on the remote to access the settings menu. Point the ( ) [All Settings] icon and select by pressing the Wheel (OK) button on the remote. All Settings ( ) 2 Select the [Connection] → [Wired Connection(Ethernet)] or [Wi-Fi Connection]. CONNECTION TV Name Wired C...

Page 22 - Troubleshooting Network Problems

Troubleshooting Network Problems 1 Press the (Settings) on the remote to access the settings menu. Point the ( ) [All Settings] icon and select by pressing the Wheel (OK) button on the remote. All Settings ( ) 2 Select the [Connection] → [Wired Connection (Ethernet)] or [Wi-Fi Connection] → [Advance...

Page 23 - GENERAL; Please call LG Customer Service if you experience any problems.

SmartShare Connection to Smartphone Updating the TV Firmware * If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. 1 (Settings) → ( )[All Settings] → [General] → [About This TV] → [CHECK FOR UPDATES] 2 After checking the v...

Page 24 - OWNER’S MANUAL; EXTERNAL CONTROL

OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com P/NO : MFL71445401 (1901-REV00)

Page 25 - KEY CODES

2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 53 List R/C Button 01 CH -, PR - R/C Button 5B Exit R/C Button 02 Volume + R/C Button 60 PIP(AD) R/C Button 03 Volume - R/C Button 61 Blue ...

Page 26 - EXTERNAL CONTROL DEVICE SETUP; Image shown may differ from your TV.; USB IN; converter which is not made nor provided by LG.; The connection interface may differ from your TV.

3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial(RS-232C) converter/RS-232C(Serial) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions ex...

Page 27 - Customer Computer

4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port.* The connection interface may differ from your TV....

Page 28 - Communication Parameters; Communication code : ASCII code; Command reference list; COMMAND1 COMMAND2

5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexade...

Page 29 - Transmission / Receiving Protocol; Transmission; : Space – ASCII code ‘0x20’; OK Acknowledgement; data of the PC computer.; Error Acknowledgement; non-viable functions or communication errors.; Real data mapping (Hexadecimal

6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose des...

Page 32 - South Korea and Japan Model

9 ENG ENGLISH 9 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) ► Adjust EQ of the set. Transmission [j][v][ ][Set ID][ ][Data][Cr] 0 0 0 0 0 0 0 0 MSB Frequency Data LSB 7 6 5 Frequency 4 3 2 1 0 Step 0 0 0 1st Band 0 0 0 0 0 0(decimal) 0 0 1 2nd Band 0 0 0 0 1 1(decimal) 0 1 0 3rd Band...

Page 33 - For Japan Model

10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don't care) Data 03 & 04: xx (Don't...

Page 34 - For Plasma TV

11 ENG ENGLISH 11 EXTERNAL CONTROL DEVICE SETUP 2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Don’t Care = 00 00 Data 05 = Digital BS TV = 07 Total = ma 00 00 00 1E 00 00 07 * This feature is var...

LG 75UM6970PUB - User Manual

Table of Contents:

Summary

Other LG TVs Models