Page 2 - ENGLISH; IMPORTANT SAFETY INSTRUCTIONS; WARNING; Wash hands after handling.
2 ENGLISH IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (O...
Page 3 - Warning
3 ENGLISH IMPORTANT SAFETY INSTRUCTIONS • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with a cart, stand, tripod, ...
Page 5 - Dot Defect; Preventing image burn or burn-in on your
5 ENGLISH IMPORTANT SAFETY INSTRUCTIONS • Dot Defect The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performanc...
Page 6 - For USA and Canada; FCC NOTICE; NOTE TO CABLE/TV INSTALLER
6 ENGLISH IMPORTANT SAFETY INSTRUCTIONS For USA and Canada FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a re...
Page 8 - CAUTION
8 ENGLISH IMPORTANT SAFETY INSTRUCTIONS CAUTION Viewing Environment • Viewing Distance - Maintain a distance of at least twice the screen’s diagonal length when watching 3D content. If you feel discomfort in viewing 3D content, move further away from the TV. Viewing Age • Infants / Children - Usage/...
Page 9 - LICENSES; NOTE
9 ENGLISH LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, pleas...
Page 10 - TABLE OF CONTENTS
10 ENGLISH TABLE OF CONTENTS TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 7 Viewing 3D Imaging (For 3D models) 9 LICENSES 9 OPEN SOURCE SOFTWARE NOTICE 10 TABLE OF CONTENTS 11 INSTALLATION PROCEDURE 11 ASSEMBLING AND PREPARING 11 Unpacking13 Optional Extras 14 Parts and Buttons 15 - Using the J...
Page 11 - INSTALLATION PROCEDURE; Unpacking
11 ENGLISH INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV net...
Page 13 - Optional Extras
13 ENGLISH ASSEMBLING AND PREPARING (For 40UB8000, 49UB8200, 49UB8300) • How to use the ferrite core (Depending upon model.) • Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV. to the...
Page 14 - Parts and Buttons; OPTION
14 ENGLISH ASSEMBLING AND PREPARING Parts and Buttons Screen Joystick Button 2 Remote Control Sensor Intelligent Sensor 1 Power Indicator Speakers (For UB8300 Series) Screen Joystick Button 2 Speakers Remote Control Sensor Intelligent Sensor 1 Power Indicator (For UB8000/UB8200 Series) 1. Intelligen...
Page 15 - Using the Joystick Button; Basic functions
15 ENGLISH ASSEMBLING AND PREPARING Using the Joystick Button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic functions Power On When the TV is turned off, place your finger on the joystick button, press it once, and release it. Power Off When the...
Page 16 - Lifting and Moving the TV
16 ENGLISH ASSEMBLING AND PREPARING Lifting and Moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. • Avoid touching the screen at all times, as this may result in damage to the...
Page 17 - Setting Up the TV; Attaching the Stand
17 ENGLISH ASSEMBLING AND PREPARING Setting Up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainmentcenter or other furniture. Attaching the Stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. • When...
Page 19 - Mounting on a Table
19 ENGLISH ASSEMBLING AND PREPARING Mounting on a Table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm (4 inches) 2 Connect the power cord to a wall outlet. • Do not place the TV ne...
Page 20 - Mounting on a Wall
20 ENGLISH ASSEMBLING AND PREPARING Mounting on a Wall An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mo...
Page 21 - Tidying Cables
21 ENGLISH ASSEMBLING AND PREPARING Tidying Cables Gather and bind the cables with the Cable Holder and Cable management . Cable Holder Cable management • Do not move the TV by holding the cable holder and cable management, as the cable holders may break, and injuries and damage to the TV may occur....
Page 22 - MAKING CONNECTIONS; Connecting to an Antenna or Cable
22 ENGLISH MAKING CONNECTIONS MAKING CONNECTIONS • This section uses illustrations of the UB8300 series. You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external dev...
Page 23 - Connecting to an HD Receiver, DVD Player, or VCR; HDMI Connection; HDMI is the best way to connect a device.; K@ 60Hz Support Format
23 ENGLISH MAKING CONNECTIONS Connecting to an HD Receiver, DVD Player, or VCR Connect a HD receiver, DVD player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the ...
Page 24 - DVI to HDMI Connection
24 ENGLISH MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. • When using the HDMI...
Page 25 - Connecting to a Mobile Phone
25 ENGLISH MAKING CONNECTIONS Connecting to a Mobile Phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. • Connect the mobile phone to the HDMI (4K @ 60Hz) / DVI IN 3 (MHL) port to view the phone screen on the T...
Page 26 - Component Connection
26 ENGLISH MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. • If cables are installed incorrectly, it could cause the image to disp...
Page 27 - Composite Connection
27 ENGLISH MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. • If you have a mono VCR, connect the audio cable from the VCR to the...
Page 28 - Connecting to a PC; HDMI Connection or DVI to HDMI Connection
28 ENGLISH MAKING CONNECTIONS Connecting to a PC • It is recommended to use an HDMI connection for the best image quality. • Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. • In PC mode, there may be noise associated with the resolution, vertical patte...
Page 30 - Connecting to an Audio System; Digital Optical Audio Connection; OPTICAL AUDIO IN
30 ENGLISH MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audi...
Page 31 - Connecting a USB Device
31 ENGLISH MAKING CONNECTIONS Connecting a USB Device Connect a USB storage device such as USB flash memory, external hard drive, or a USB memory card reader to the TV. • Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on t...
Page 32 - REMOTE CONTROL
32 ENGLISH REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside t...
Page 34 - USING THE USER GUIDE; SMART; EXTERNAL CONTROL
34 ENGLISH USING THE USER GUIDE / EXTERNAL CONTROL DEVICE SETUP USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. 1 Press SMART button to access the Home menu. 2 Select SETTINGS → SUPPORT . 3 Select User Guide and press the OK button. SUPPORT Sound Test3D ...
Page 35 - SPECIFICATIONS
35 ENGLISH SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Television System ATSC, NTSC-M, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135 External Antenna Impedance 75 Ω Environmen...
Page 37 - MAINTENANCE; Cleaning Your TV; Power Cord; TROUBLESHOOTING; Sleep Timer / Off Time
37 ENGLISH MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product’s lifespan. • Before cleaning, turn the power off and disconnect the power cord and all other cables. • When the TV is left unattended or unused for ...
Page 38 - THE CONSUMER ELECTRONICS INDUSTRY CARES; TUNE IN TO SAFETY; MOVING AN OLDER TELEVISION TO A NEW PLACE IN; PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or in...
Page 40 - LG Customer Information Center; Register your product Online!
The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service. MODEL SERIAL LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial U...
Page 41 - OWNER’S MANUAL
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com
Page 42 - kEy CODES
2 ENG ENGLISH 2 KEY CODES kEy CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 53 List R/C Button 01 CH -, PR - R/C Button 5B Exit R/C Button 02 Volume + R/C Button 60 PIP(AD) R/C Button 03 Volume - R/C Button 61 Blue ...
Page 43 - EXTERNAL CONTROL DEVICE SETUP; Image shown may differ from your TV.; USB to Serial converter with USB Cable; USB Type; USB IN; which is not made nor provided by LG.; The connection interface may differ from your TV.
3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: T...
Page 44 - Customer Computer
4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port.* The connection interface may differ from your TV....
Page 45 - Communication Parameters; Communication code : ASCII code; Command reference list; COMMAND1 COMMAND2
5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexade...
Page 46 - Transmission / Receiving Protocol; Transmission; : Space – ASCII code ‘0x20’; Ok Acknowledgement; data of the PC computer.; Error Acknowledgement; non-viable functions or communication errors.; Real data mapping (Hexadecimal
6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose des...
Page 49 - South Korea and Japan Model
9 ENG ENGLISH 9 EXTERNAL CONTROL DEVICE SETUP 1 0 0 5th Band 0 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ► To reduce the power consumption of the TV. You can als...
Page 50 - For Plasma TV
10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor c...
Page 52 - ► To adjust picture position and minimize image
12 ENG ENGLISH 12 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data...
