Page 2 - ENG; ENGLISH; IMPORTANT SAFETY INSTRUCTIONS; WARNING; Wash hands after handling.
ENG ENGLISH 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. y y Do not use this apparatus near water. Short-circuit Breaker Power Supply y y Clean only with dry cloth...
Page 5 - FCC Notice
ENG ENGLISH 5 IMPORTANT SAFETY INSTRUCTIONS dots are deactivated pixels and do not affect the performance and reliability of the TV. y y Generated Sound Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and ...
Page 6 - FCC RF Radiation Exposure Statement; Industry Canada Statement; NOTE; Note to Cable/TV Installer
ENG ENGLISH 6 IMPORTANT SAFETY INSTRUCTIONS FCC Radio Frequency Interference Requirements (for UNII devices) High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/ or damage this device. This device c...
Page 7 - Viewing 3D Imaging
ENG ENGLISH 7 IMPORTANT SAFETY INSTRUCTIONS Viewing 3D Imaging WARNING Viewing Environment y y Viewing Time - When watching 3D contents, take five- to fifteen-minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue, or eye strain. Those that hav...
Page 8 - LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION; LICENSES; OPEN SOURCE SOFTWARE NOTICE INFORMATION
ENG ENGLISH 8 LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com . OPEN SOURCE SOFTWARE NOTICE INFORMATION To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is co...
Page 9 - TABLE OF CONTENTS
ENG ENGLISH 9 TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 5 - FCC Notice 6 - Industry Canada Statement 6 - IC Radiation Exposure Statement 6 - Note to Cable/TV Installer 6 - LG Recycling Policy 7 Viewing 3D Imaging 8 LICENSES 8 OPEN SOURCE SOFTWARE NOTICE INFORMATION 9 TABLE OF CONTENTS 10 INS...
Page 10 - INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING; INSTALLATION PROCEDURE; Unpacking; CAUTION
ENG ENGLISH 10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV...
Page 11 - ASSEMBLING AND PREPARING
ENG ENGLISH 11 ASSEMBLING AND PREPARING P Magic Remote, Batteries (AA) (See page 33.) Owner’s Manual Cable Holder (See page 21.) (For 55EG9600) (For 65EG9600) Cinema 3D Glasses The number of 3D glasses may differ depending upon the model or country. Stand Base (See page 16, 17.) Stand Base (See page...
Page 12 - Optional Extras; LG Audio Device
ENG ENGLISH 12 ASSEMBLING AND PREPARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed manufacturer’s circums...
Page 13 - Parts and Buttons; GENERAL
ENG ENGLISH 13 ASSEMBLING AND PREPARING Parts and Buttons 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 Joystick button is located below the screen of TV. LG Logo Light (For EG9600, EF9500 series) Power Indicator (For EG9200 series) Screen Sp...
Page 14 - Using the Joystick button; Basic functions
ENG ENGLISH 14 ASSEMBLING AND PREPARING Using the Joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic functions Power On When the TV is turned off, place your finger on the joystick button, press it once, and release it. Power Off When...
Page 15 - Lifting and Moving the TV
ENG ENGLISH 15 ASSEMBLING AND PREPARING Lifting and Moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. y y Avoid touching the screen at all times, as this may result in damage ...
Page 16 - Setting Up the TV; Attaching the Stand
ENG ENGLISH 16 ASSEMBLING AND PREPARING 1 2 Setting Up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the Stand If you are not mounting the TV to a wall, use the following instructions to attach the stan...
Page 20 - Mounting on a Table
ENG ENGLISH 20 ASSEMBLING AND PREPARING Mounting on a Table (Image shown may differ from your TV.) 1 Lift and tilt the TV into its upright position on a table.- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm (4 inches) 10 cm 10 cm 10 cm 10 cm 2...
Page 21 - Tidying Cables
ENG ENGLISH 21 ASSEMBLING AND PREPARING Securing the TV to a wall (optional) (Depending upon model) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the b...
Page 22 - Mounting on a Wall; B C
ENG ENGLISH 22 ASSEMBLING AND PREPARING Mounting on a Wall An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall ...
Page 23 - MAKING CONNECTIONS; Connecting to an Antenna or Cable
ENG ENGLISH 23 MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s conn...
Page 24 - Connecting to a HD receiver, DVD Player, or VCR; Picture; HDMI Connection; HDMI is the best way to connect a device.
ENG ENGLISH 24 MAKING CONNECTIONS Connecting to a HD receiver, DVD Player, or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. y y HDMI specifications may be different for each input port, so make sure to check the device specifications before connecting....
Page 25 - DVI to HDMI Connection
ENG ENGLISH 25 MAKING CONNECTIONS AUDIO OUT DVI OUT DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable....
Page 26 - Component Connection
ENG ENGLISH 26 MAKING CONNECTIONS VIDEO AUDIO L R Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. y y If cables are installed incorrectly, it could c...
Page 27 - Composite Connection
ENG ENGLISH 27 MAKING CONNECTIONS VIDEO MONO ( ) AUDIO L R Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. y y If you have a mono VCR, connect the ...
Page 28 - Connecting to a PC
ENG ENGLISH 28 MAKING CONNECTIONS Connecting to a PC y y Use an HDMI connection for the best image quality. y y Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. y y In PC mode, there may be noise associated with the resolution, vertical pattern, contras...
Page 29 - Method B DVI to HDMI Connection; HDMI Connection or DVI to HDMI Connection; Choose method A or B to make connection.; Method A HDMI Connection
ENG ENGLISH 29 MAKING CONNECTIONS Method B DVI to HDMI Connection AUDIO OUT DVI OUT (*Not Provided) PC (*Not Provided) HDMI Connection or DVI to HDMI Connection Choose method A or B to make connection. Method A HDMI Connection HDMI (*Not Provided) PC
Page 30 - Connecting to an Audio System; Digital Optical Audio Connection
ENG ENGLISH 30 MAKING CONNECTIONS OPTICAL AUDIO IN Digital Audio System (*Not P ro vided) Connecting to an Audio System You may use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. ...
Page 31 - Connecting Headphones
ENG ENGLISH 31 MAKING CONNECTIONS Connecting Headphones (For EG9600, EF9500 series) Listening to sound with headphones. y y Do not use headsets (earphones) at high volume or for a long time. It may cause damage to your hearing. y y AUDIO menu options are disabled when headphones are connected. y y W...
Page 32 - Connecting a USB Drive
ENG ENGLISH 32 MAKING CONNECTIONS (*Not Provided) Choose any USB input port to connect. It does not matter which port you use. USB / USB HUB / HDD Connecting a USB Drive Connect a USB storage device such as a USB flash thumbdrive, external hard drive, or a USB memory card reader to the TV and access...
Page 33 - MAGIC REMOTE FUNCTIONS; Magic remote control battery is low. Change the battery
ENG ENGLISH 33 MAGIC REMOTE FUNCTIONS MAGIC REMOTE FUNCTIONS When the message Magic remote control battery is low. Change the battery . is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment,...
Page 34 - MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE; Registering Magic Remote; How to register the Magic Remote; How to Use Magic Remote; USING THE USER GUIDE; User Guide
ENG ENGLISH 34 MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE Registering Magic Remote How to register the Magic Remote (Wheel) To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) o...
Page 35 - SPECIFICATIONS
ENG ENGLISH 35 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement AC 120 V ~ 50 / 60 Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-13...
Page 37 - MAINTENANCE / TROUBLESHOOTING; MAINTENANCE; Cleaning Your TV; Power Cord; TROUBLESHOOTING
ENG ENGLISH 37 MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product lifespan. y y Make sure to turn the power off and disconnect the power cord and all other cables first. y y When the TV is left unattended or unu...
Page 39 - THE CONSUMER ELECTRONICS INDUSTRY CARES; TUNE IN TO SAFETY; MOVING AN OLDER TELEVISION TO A NEW PLACE IN; PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or in...
Page 40 - LG Customer Information Center; Register your product online!
LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1-888-542-2623 CANADA Register your product online! www.lg.com Declaration of Conformity Trade Name LG Model 55EG9600-UA, 65EG9600-UA 55EG9600-UB, ...
Page 41 - OWNER’S MANUAL; EXTERNAL CONTROL
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com
Page 42 - KEY CODES
2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 53 List R/C Button 01 CH -, PR - R/C Button 5B Exit R/C Button 02 Volume + R/C Button 60 PIP(AD) R/C Button 03 Volume - R/C Button 61 Blue ...
Page 43 - EXTERNAL CONTROL DEVICE SETUP; Image shown may differ from your TV.; USB to Serial converter with USB Cable; USB Type; USB IN; which is not made nor provided by LG.; The connection interface may differ from your TV.
3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: T...
Page 44 - Customer Computer
4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port.* The connection interface may differ from your TV....
Page 45 - Communication Parameters; Communication code : ASCII code; Command reference list; COMMAND1 COMMAND2
5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexade...
Page 46 - Transmission / Receiving Protocol; Transmission; : Space – ASCII code ‘0x20’; OK Acknowledgement; data of the PC computer.; Error Acknowledgement; non-viable functions or communication errors.; Real data mapping (Hexadecimal
6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose des...
Page 49 - South Korea and Japan Model
9 ENG ENGLISH 9 EXTERNAL CONTROL DEVICE SETUP 1 0 0 5th Band 0 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ► To reduce the power consumption of the TV. You can als...
Page 50 - For Plasma TV
10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor c...
Page 52 - ► To adjust picture position and minimize image
12 ENG ENGLISH 12 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data...
