Page 2 - TABLE OF CONTENTS; CHECKING BEFORE
2 ENGLISH TABLE OF CONTENTS BASIC .............................................3 -Checking the Accessories ............................................3 -Checking the Optional Accessories .........................4 -Learning the Buttons ......................................................5 GETTING...
Page 3 - BASIC; NOTE; Checking the Accessories
3 ENGLISH This product is not intended for household use. BASIC NOTE • The accessories provided with your product may vary depending on the model or region. • Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. • SuperSign Softwa...
Page 4 - How to use the ferrite core; Checking the Optional Accessories
4 ENGLISH How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. 2 Place the ferrite core close to the monitor. Checking the Optional Accessories In order to improve product performance, optiona...
Page 5 - Learning the Buttons
5 ENGLISH Learning the Buttons The illustrations may differ depending on the model. • : Change the input signal. • : Accesses the main menus, or saves your input and exits the menus. • : Adjust the up and down. • : Moves left and right. • : Displays the current signal and mode. • : Turns the power o...
Page 6 - GETTING READY; Storage Method for Panel Protection
6 ENGLISH GETTING READY Storage Method for Panel Protection Correct Method 1 If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel to touch the floor. Panel 2 When laying down the product, lay a cushion on a flat floor. Put the ...
Page 8 - Connecting the IR Sensors
8 ENGLISH Connecting the IR Sensors This allows a remote control sensor to be placed in a custom location.Then that display can control other displays via an RS-232C cable.
Page 9 - Kensington Lock Device
9 ENGLISH Kensington Lock Device (This feature applies only to some models.)The Kensington lock device connector is located on the back of the monitor. For more information on installation and use, refer to the user manual provided with the locking device.Connect the Kensington security system cable...
Page 10 - CHECKING BEFORE INSTALLATION; Installation Orientation; Using Vertically
10 ENGLISH CHECKING BEFORE INSTALLATION We are not responsible for product damage caused by failure to follow the guide. Installation Orientation Using Vertically When installing vertically, rotate the monitor 90 degrees clockwise while facing the front of the screen. Tilt Angle 40 mm 15˚ Ceiling, F...
Page 11 - Installation Location; Indoor; Outdoor
11 ENGLISH Installation Location We are not responsible for product damage caused by failure to follow the guide. Indoor Installing on a Wall A B B B B B B B B A A : 200 mm (7.8 inches) or moreB : 100 mm (3.9 inches) or more • The warranty will not cover any damage caused by using the product in dir...
Page 12 - Wall Mount Holder; CAUTION
12 ENGLISH Wall Mount Holder To install the monitor on a wall, attach a wall mount holder (optional) to the back of the monitor.Take caution, and ensure that the wall mount holder (optional) is securely fixed to the monitor and to the wall.The VESA dimensions of the wall mount by model are as follow...
Page 13 - WARNING
13 ENGLISH Securing the monitor to a wall (optional) (Depending on model) 1 Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor. - If there are already bolts inserted in the eyebolts’ position, remove the other bolts first. 2 Mount the wall brackets with the bolts to th...
Page 14 - Safety and Precaution Guide for Installation
14 ENGLISH Safety and Precaution Guide for Installation During installation, ensure any conductive materials (metals, etc.) do not enter through the gaps or vent holes between the panel and the back cover. - Covering the back of the product with a cloth may prevent foreign substances from entering t...
Page 15 - Tiling Displays
15 ENGLISH Tiling Displays How to Mount the Set Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall. Screws for attaching the VESA wall mount (M6) (Unit: mm (inches)) 600 (23.6) 400 (15.7)
Page 18 - PRECAUTIONS FOR USE; Dust
18 ENGLISH PRECAUTIONS FOR USE Dust The warranty will not cover any damage caused by using the product in an excessively dusty environment. Afterimage • After-image appears when the product is turned off. - Pixels may be damaged rapidly if a still image is displayed on the screen for a long period o...
Page 20 - PRODUCT SPECIFICATIONS
20 ENGLISH PRODUCT SPECIFICATIONS Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product. 55VH7J Input/Output Ports Resolution Recommended Resolution 1920 x 1080 @ 60 Hz Max Resolution HDMI1 / HDMI2 / ...
Page 23 - LICENCE
23 ENGLISH LICENCE Supported licenses may differ by model. For more information of the licenses, visit www.lg.com . The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license f...