LG 55NANO75SQA - User Manual

Live TV Preparation Watching Broadcast TV You can also connect a piece of equipment that can receive broadcasting such as a set-topbox instead of the antenna. Launch General Devices External Devices Universal Control Settings . To solve a problem related to this function, refer to the Troubleshootin...

If the Network Is Not Automatically Connected Some models may not be supported. Setting a Wireless Network Connect the LAN port of the TV and the router using a LAN cable. The router should be connected to the Internet beforehand. If the router supports DHCP, the TV is automatically connected to the...

Network Setting Warnings Use standard LAN cable (connect to Cat7 or higher with RJ45 connector, 10 Base-T, or100 Base TX LAN port). Resetting the router may cause network connection problems. In this case, the router willoperate normally if you turn it off and disconnect the TV, and then reconnect a...

To solve a problem related to this function, refer to the Troubleshooting section of User Guide . Managing Your LG Account LG Membership Logging in with LG Account enables you to use customised recommended content and various app services. You can sign up for LG membership and log in with your email...

About User Guide About User Guide For information on each feature of the LG webOS TV, consult the User Guide available on the TV. You can check the description of the associated User Guide by clicking User Guide in the upper-right corner while using the app, or by clicking during setup in Settings ....

Pairing the Magic Remote You must pair the Magic Remote with the LG webOS TV to use it. Pair the Magic Remote prior to use as follows: If the Magic Remote failed to register, turn the TV off and back on, and then try to registeragain. Re-registering the Magic Remote If the Magic Remote’s pointer doe...

If the pointer is not responding smoothly, you can reset the pointer by moving it to the edgeof the screen. Use the remote control within the working distance (within 10 metres). If there is anobstacle between the TV and the remote control, it may not operate properly. Depending on the peripherals (...

Some models may not be supported. Menu Language must be set as the official language of the country in Location to see correct search results. If Menu Language is not set as the official language, some functions may be limited. You can change the language in General System Language Menu Language . T...

volume, pronunciation, accent, and talking speed) and the surroundings (noise and TVvolume). To achieve accurate recognition of your speech, you must pronounce words in a slow andaccurate manner at an appropriate voice volume at a distance of about 10 cm away fromthe Magic Remote’s microphone. If yo...

Cautions When Using Speech to Text Check the network connection before using the Speech to Text function. You can change the language in General System Language Menu If there are words similar to that which you spoke out loud, you may see a list ofmultiple results as shown below. If you do not get t...

Language . To temporarily switch to another speech recognition language, press the button in the voice recognition information display window. You can only use this function to agree to voice recognition terms. The Speech to Text rate may vary depending on the user’s characteristics (voice,pronuncia...

Press the (Amazon Alexa) button on the remote control to access the settings and help information for Amazon Alexa. Different services may run in countries where Amazon Alexa is not supported. Service operation and supported countries may change in accordance with Amazon’spolicies. To View More Feat...

The types of buttons appearing on the More Actions vary, depending on the region and the type of connected device. Setting Universal Control Automatically Setting the Universal Remote Control When you set up the universal remote control, you can control the peripherals (Blu-ray/DVD player, home thea...

You can purchase the Magic Remote separately if it is not provided. Some models may not be supported. When changing settings on a device, make sure it is powered on first. To set up a universal remote control with the latest information, connect to the network andaccept the User Agreements. The manu...

Connecting to SIMPLINK (HDMI-CEC) Using SIMPLINK With a single remote control, you can easily manage various devices such as asoundbar or set-top box connected to a TV with HDMI. Up to three devices can be connected and used simultaneously. Selecting a number that has already been registered allows ...

This feature works only with devices with the logo. Check for the SIMPLINK logo on the external device. Use of any product other than those specified may cause problems during operation. To use SIMPLINK, you need to use a high-speed HDMI ® cable with CEC (Consumer Electronics Control) function. The ...

Press and hold the button on your remote control. In Accessibility , you can set up High Contrast , Greyscale , Invert Colours , etc. Connecting an Input Device to USB Using a USB Wired/Wireless Mouse Connect your mouse to the USB port. Use the mouse to move the pointer on the TVscreen and select th...

Controller, Logitech F310, Logitech F710 Connecting Bluetooth Input Devices You can connect and use devices such as a Bluetooth-enabled keyboard, mouse, or agamepad with your TV. To see the details, click the Settings Devices External Devices Connect Bluetooth Controller in User Guide . Enjoy Live T...

The programmes displayed in Programme List are a configuration of programmes providedby the broadcast service provider. Therefore, if the broadcast service provider has changedits programme configuration without notice, the programmes displayed in Programme Listmay differ from the actual TV programm...

Programme information is not displayed for programmes with no provided broadcastinformation. Some models may not be supported. The configurable items differ depending on model. Checking Programme Info Viewing Programme Information During watch the Live broadcast, press the Wheel (OK) button. The Pro...

appears. You can move the banner's position by pressing the button on the remote control and selecting Change Banner Location . If your remote control does not have a button, press and hold the button. Available features may vary depending on the broadcast signal. Live Playback Using Live Playback (...

Changing between programmes during Live Playback will delete the data of the previousprogramme. Some models may not be supported. Recording Using Instant Recording To end the recording, press the button on the remote control during recording and select Record . Matters That Require Attention of Reco...

test. Start recording after the test has been completed normally. Because of the content protection technology used, the recorded video cannot be playedon PCs or other TV models. Also, the video cannot be played if the TV’s video circuit isreplaced. Do not remove the USB cable while recording. If yo...

Select a device to be used with record the music when USB HDD is connected to the TV. If there is not enough remaining space in the USB HDD device, Music Catch may not workproperly. To use Music Catch function, you need the USB HDD which has at least 100MB. Stored files can be viewed in the Media Pl...

The length of the scheduled recording should be at least 1 minute. Playing Recorded TV Programs Managing Recordings You can view and play recordings stored on storage devices by using the Recordings app. You can only play recordings made on the current TV in Recordings . Run Live TV by pressing . 01...

Playing Recordings You can access and operate basic features such as playback and pause on theplayback screen. The configurable items differ depending on model. Watching Internet Channel (LG Channels) Select your desired recording from the Recordings app. 01 Pressing the / buttons on the remote cont...

Watching Internet Programme You can watch real-time broadcasts through this service over the Internet. You can see information on new Internet Programmes or manage the programmes youlike in LG Channels . Press the button on the remote control and select LG Channels . You can also watch LG Channels b...

Colour button To select the preceding or following page. Number button Enters the page number to move to. (Programmes) / Button To select the preceding or following page. Some models may not be supported. Special Teletext Function Index Select each index page. Time When viewing a TV programme, selec...

more sub pages. The number of sub pages and the sub page displayed is, usually,shown on the screen below the time. When this menu is selected the stop symbol isdisplayed at the top left-hand corner of the screen and the automatic page change isinactive. Reveal Select this menu to display concealed i...

HbbTV (Hybrid Broadcast Broadband TV) is a new broadcasting standard that enablessuper-teletext type services, delivered by a broadcast TV programme, to be integrated orlinked to online services delivered over broadband to a connected Smart TV.Consumers are therefore able to access various online se...

Installing Apps Installing Apps You can install apps in a variety of categories such as games, education, and news andconveniently use them on your TV. In order to install apps, you must be logged in. Available categories may vary depending on the country or service status. Press the button on the r...

If the storage on your TV is insufficient, you can install the apps by connecting an externalmemory device. Some USB storage devices may not be supported or may not work properly. USB stick containing apps from other TVs may not be used. Exercise caution when in use by children. Children may have ac...

The supported services vary depending on countries, so the recommendations may beprovided differently. The list of the recommendations may be less relevant or irrelevant, depending on theinformation of the programme you are watching. Content Search Content Search Searches for content by title, actor...

Connecting External Devices Using Home Dashboard Using Home Dashboard You can select or control a device (mobile, external device, Home IoT Devices, etc.)connected to the TV. Run Home Dashboard by pressing the button on the remote control. You can also press and hold the button on Magic Remote. You ...

Available settings vary depending on the model or region. Connecting Home IoT Devices Connecting Home IoT Devices You can check and control the status of the connected Home IoT Devices. If you are in an area where the LG ThinQ app is not in service, LG ThinQ device connection The currently selected ...

will not be supported. To register your IoT device, select Connect Home IoT Devices and follow the instructions to apply settings. If you are controlling the external device from your mobile app, you might not be able tocontrol the device from your TV. Quit the mobile app to control it from your TV....

Voice commands can also be made through Smart Speaker linked to the account in thesettings of the LG ThinQ app. The service may not offer depending on country. Controlling Your TV with the LG ThinQ App You can tap the buttons on your smart device’s screen to control the TV. Download the LG ThinQ app...

Some controls may be limited in external input mode. The app’s screen and functionality are subject to change without prior notice. Available features may differ depending on your country and OS. Using the Camera of a Connected Smart Device on the TV You can use the camera of a smart device connecte...

Some countries do not support LG ThinQ app installation with NFC tags. In this case,download the LG ThinQ app from each app store. This feature is available for NFC-enabled smart devices only. Depending on the smart device, the NFC location may be different. For more information,refer to the user ma...

programme or setting up a Bluetooth speaker. If you connect a smart device to the TV via Bluetooth and listen to the sound of the smartdevice through the TV speaker, the TV may not be connected to any other smart device. Connecting USB Connecting USB Connect a USB storage device (USB HDD, USB stick)...

USB IN port, the format message appears. To use the connected USB storage device, you should format the device first. Formatting deletes all data stored on the USB storage device, and the device is formattedwith the FAT32, exFAT or NTFS file system. Run Home Dashboard by pressing the button on the r...

You cannot delete files that are shared from other devices. Different settings items are available depending on the filtering or model you selected. Certain content may not be displayed on the list if the number of all content exceeds40,000. Viewing Photos Viewing Photos You can select a photo from ...

Playing Videos Playing Videos You can select a video from the Media Player app and play the video. Pressing the / buttons on the remote control allows you to skip backward/forward 10seconds. You can access more features by pressing the button on the remote control whileplaying a video. Enlarges or r...

Listening to Music Listening to Music You can select a song from the Media Player app and play the song. You can use more features by pressing the button on the remote control while playinga song. Fast-rewinds the video at higher speeds. You can do the settings related to play on repeat of the video...

PC Remote Operation PC Remote Operation The PC can be remotely operated from the TV. Connecting a keyboard and mouse to the TV enables smooth operation. If the keyboard layout of the keyboard connected to the PC and the keyboard connected tothe TV are different, certain keys may not work. Both TV an...

Sharing PC Content Watch content saved in your PC on the TV You can enjoy videos/music/photos stored on your PC on the TV when these devicesare connected to the same network. Browse the content on your PC to watch on TV (Windows 10) Even when multiple TVs or devices are connected, the selected file ...

may be affected by your wireless environment. May not work properly depending on the network environment. If multiple TVs are connected to one device, the content may not be played properlydepending upon server performance. To watch a 1080p video through the content sharing function, a router using ...

Start Screen Share faster by having your smart device or PC connected to the samenetwork as the TV. Though it can be connected without a wireless router, connecting your device to a 5 GHzrouter is recommended because the performance can be affected by the surroundingwireless environment. The respons...

You can also use this feature by pressing and holding the OK button on the standard remote control. Available features vary depending on the region or service. Some models may not be supported. Using the Room to Room Share Using the Room to Room Share By connecting multiple TVs connected to the same...

video turns the screen off automatically. Surfing the Internet on TV Using the Web Browser You can enter the website when you input the web address on the URL bar. If you input the search word, it will find the information about search word base on thesearch engine. Press the button on the remote co...

The Web Browser app on your TV is a browser for TV, so it may work differently than the browser for your PC. The website can be accessed through the TV's Web Browser app, so care needs to be taken about children's access to harmful online contents. You can lock the Web Browser app to prevent access ...

Do Not Track You can request to not leave a history of your visit on the website. The operation mayvary depending on the policy of the website. Adaptive Streaming using JavaScript The media streaming technology using JavaScript allows you to view video withoptimised resolution. If this is set to Off...

Video Conferencing You can have a video conference using an Internet website or an app that enables videoconferences. This function may not be available in some countries or models. Internet connection is required to use this feature. Depending on camera performance or the network environment, the i...

Some models may not be supported. Live Plus Using the Live Plus Function Live Plus provides an enhanced viewing experience related to the content you're watching including looking at additional information, participating in events, interactingwith advertisements, etc. Some models may not be supporte...

Move to an item that can be set up, press the remote control's Wheel (OK) button once, and then press and hold the Wheel (OK) button to move to the menu. The configurable items differ depending on model. Game Dashboard During a game, you can quickly change the Game Genre and check the settings statu...

The configurable items differ depending on model. Picture Selecting Picture Mode Picture Select Mode Select the picture mode that is best suited to your viewing environment, preferences orvideo type. You can optimise the screen depending on the genre of the game. Real-time signals and the selected g...

daytime) . Select a mode that is suitable for the movie you are watching. ISFccc : Imaging Science Foundation Certified Calibration Control When You Use the HDR/Dolby Vision Signals Vivid Sharpens the image by increasing the contrast, brightness and sharpness. Standard In a normal viewing environmen...

Setting the Screen Size Picture Aspect Ratio User Selection You can change the screen size according to the type of content you are watching. 16:9 Displays an aspect ratio of 16:9. Original The optimal screen ratio changes depending on the input image signal. 4:3 Displays an aspect ratio of 4:3. Ver...

If set to Auto , the feature switches between On or Off status depending on the information contained in the video signal. The items that can be selected may vary depending on the current input. Adjusting the Brightness of a Picture Picture Advanced Settings Brightness You can adjust the brightness ...

results depending on the brightness of the picture. Dynamic Tone Mapping Suitable contrast settings based on image brightness of the HDR content. Peak Brightness Adjusts the maximum brightness of the screen. Gamma(Adjust Brightness) Adjusts the medium brightness of the picture. BT.1886 expresses the...

You can do these settings only when the Picture Select Mode is the Cinema , Expert (Bright space, daytime) or the Expert (Dark space, night) and when the Method is set to 10 Points Signal Level(%) or 22 Points Signal Level(%) . Red / Green / Blue Adjust the color temperature of the selected point. A...

TruMotion Suitable the image quality of fast-moving pictures. The advanced settings can be changed only in User Selection mode. Precision Detail Dolby Vision technology, which analyses content information to improve clarity andcontrast, expresses natural landscapes such as clouds, rocks, sand, water...

Picture Advanced Settings FILMMAKER MODE Auto Start If set to On , Picture Mode will automatically be changed to FILMMAKER MODE when a signal that can be operated with FILMMAKER MODE is entered. While this mode effectively conveys the creator's intention, it may appear darker than other Picture Mode...

Clear Voice / Clear Voice Pro Boosts voice clarity. Sports / Football / Cricket Optimises the sound for sports games. The name of the sport may differ depending on region. Music Optimises the sound for music. Game Optimiser Optimises the sound for gameplay. This setting only applies to the internal ...

Some models may not be supported. The audio codec that can be output via Bluetooth is SBC/aptX TM . You can control the TV or enter speech by touching LG Tone Free connected to the TV. For the operation method, refer to the device manual or the Tone Free app installed on thesmart device. If you chan...

Mobile Device If you install the LG ThinQ app on a smart device and connect it to your TV, you can usethe device as a speaker for the TV. Use Wired Speaker Sound Sound Out Use Wired Speaker Optical Out Device You can connect an audio device that supports Optical to the optical digital audio outputpo...

sound at the same time or a surround sound can be used. Up to two Bluetooth devices of the same model can be connected. When you set Sound Out as Bluetooth Device + TV Speaker , if Picture Select Mode is Game Optimiser , it will be changed to Standard and Dolby Atmos will be turned off. While using ...

HDMI(ARC) Device . To adjust the volume of the connected hearing aid on the TV, press next to the HDMI(ARC) Device + TV Speaker . Wired Headphones + TV Speaker Audio is played through the TV’s internal speakers and the Wired Headphones simultaneously. Some models may not be supported. If you connect...

This setting only applies to the internal speakers of the TV or HDMI (eARC/ARC) connected devices that support TV Sound Mode Share . Installation Type Sound Advanced Settings Installation Type This mode optimises the sound based on the TV setup. Stand Select this if the TV is installed in stand-type...

Adjusting AV Synchronization Sound Advanced Settings Match Screen and Sound Adjusts the synchronization of the sound from the speaker that is working. The closer the value is set to 60, the slower the voice output speed will be than thedefault speed. If you select Bypass , Outputs the broadcast sign...

Setting Digital Sound Output Sound Advanced Settings Digital Sound Output You can configure the Digital Sound Output settings. This setting is only available when Sound Sound Out Use Wired Speaker is set to Optical Out Device / HDMI(ARC) Device . When Pass Through is enabled, sound effects may not b...

Sound Advanced Settings eARC Support eARC is a technology that can send and receive more sound information faster thanksto its wider bandwidth than that of the conventional ARC. You can enjoy TV sound withhigher quality than ARC through a connected audio device. AI Service AI Brightness Settings Gen...

When the initial detection is complete, you can select your desired audio mode. If there is more than a library noise level (over 30 ~ 40 dBA), we recommend that you installfrom within 3 metres. This function may not work properly Viewing Voice Recognition Help General AI Service Voice Recognition H...

You can get an introduction to smart features you can use when watching TV orusing an app. Next Picks You can get recommendations based on your TV viewing patterns. This feature may not be available in some countries. Sports Alert Move to the Sports Alert app. You can check information about sports ...

When Game Optimiser is set to On , audio delays may occur if you set Sound Out to Bluetooth Device / WiSA Speakers / Optical Out Device / HDMI(ARC) Device . Switch to Use TV Speaker or change Sound Advanced Settings Select HDMI Input Audio Format to PCM . The configurable items differ depending on m...

Family Settings Usage Limits Setting General Family Settings Usage Limits Setting You can use the TV in the set time period only. Outside of the set time period, you mustenter your password to use the TV. For instructions on how to reset the password, refer to Settings System Safety in User Guide . ...

Programmes Automatically Setting Up Programme General Programmes Programme Tuning Auto Tuning Automatically tunes the programmes. If Input Source is not connected properly, programme registration may not work. Auto Tuning only finds programmes that are currently broadcasting. If Safety is turned on,...

Learn More about HbbTV HbbTV (Hybrid Broadcast Broadband TV) is a new broadcasting standard that enablessuper-teletext type services, delivered by a broadcast TV programme, to be integrated orlinked to online services delivered over broadband to a connected Smart TV. To see the details, click the En...

Some models may not be supported. Setting a Wireless Network General Network Wi-Fi Connection If you have set the TV up for a wireless network, you can check and connect to theavailable wireless Internet networks. Select the wireless router to connect. For more detailed settings, select Other Networ...

Home/Store Mode You can choose between Home Mode and Store Mode . To use the TV at home, select Home Mode . Select Store Mode only when the TV will be displayed in store. The Store Mode provide settings optimised for store display. Quick Start+ This setting puts your TV in standby mode when it’s tur...

If the Bluetooth device is too far from the TV, or there are obstacles between them, theymay not operate normally. Depending on the peripherals (wireless router, microwave oven, etc.), communicationfailures may occur. If the device you selected from Registered Devices does not reconnect, Disconnect ...

General Devices HDMI Settings You can apply settings to ensure a clear picture and easy control for the HDMIconnected devices. HDMI Deep Colour If you connect a device that supports HDMI Deep Colour , you can enjoy a clearer image. After connecting the playback device, set HDMI Deep Colour to 4K . I...

YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:4:4 YCbCr 4:4:4 YCbCr 4:4:4 RGB 4:4:4 RGB 4:4:4 RGB 4:4:4 100 120 YCbCr 4:2:0 YCbCr 4:2:0 YCbCr 4:2:0 YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:4:4 YCbCr 4:4:4 YCbCr 4:4:4 RGB 4:4:4 RGB 4:4:4 RGB 4:4:4 1) Supported when HDMI Deep Colour is set to 4K . 2)...

Menu Language You can select one of the menu languages to be displayed on the screen. Thelanguage for the speech recognition will be automatically set to the selected languagefor the menu. The speech recognition is only applied to some models. Primary Audio Language / Secondary Audio Language You ca...

If you don’t set the Set Automatically , you can select the country manually. Weather Location Setting Please set your region to display the weather on the screen saver and, etc. You must set the country manually when you are not connected to the network. The configurable items differ depending on m...

Power Off Timer Set Power Off Timer to On . The TV is turned off at the set time. Auto Power Off after 4 Hours If you do not press any button for 4 hours after the TV is turned on by a feature suchas Power On Timer , the TV will be turned off automatically. To ensure the TV does not automatically tu...

General System Additional Settings Notifications You can view or delete notifications from TV apps and LG services. For notifications thatsupport shortcuts, you can go directly to that app or website. Home Settings General System Additional Settings Home Settings Home Auto Launch You can set Home to...

You can turn the standby light on or off. Some models may not be supported. Setting the Pointer of Magic Remote General System Additional Settings Pointer Options You can set the pointer speed and size you want while it is on the screen. Tracking Speed Sets the pointer speed. Pointer Size Selects th...

Some models may not be supported. To Use Settings Help General System Additional Settings Settings Help When set to On , you can get help for the selected items when navigating through the Settings menu. Set ID General System Additional Settings Set ID You can set a number (ID) to manage multiple TV...

If Safety is set to On , you should type the password to Reset to Initial Settings . Do not turn off the power during initialization. We recommend that you reset the TV to Reset to Initial Settings before you sell it or transfer it to a third party. Energy Saving To Use Energy Saving Feature General...

Accessibility Learn Remote Control General Accessibility Learn Remote Control Press a button on the remote control following the on-screen instructions to getinformation about the button. Pressing the button twice in succession ends Learn Remote Control . Press the button to turn off the TV, and the...

Greyscale General Accessibility Greyscale Change the colour of the menu on the screen to black and white tone to make itsambiguity very clear. Set to On . Invert Colours General Accessibility Invert Colours To enhance the visibility of the menus on the screen, you can invert and calibratecertain col...

Audio Description For the visually impaired Selects the preferred default Audio combined with VisualImpaired Audio. Spoken Subtitle For the visually impaired, selects the preferred Visual Impaired Audio only. Any Supplementary Audio Displays all supplementary audio. Some models may not be supported....

When the Hard of Hearing is turned On , it will be prioritized over the general captions. Some models may not be supported. Support Software Update Support Software Update Uses software update to check and obtain the latest version. Auto Update When it is set to On , updates are automatically made w...

whether there is an error with the signal on the screen. If there are no problems in the test, check the connected external device or broadcastsignal. Sound Self-diagnosis Support Sound Self-diagnosis Start the Sound Test to check that the sound signal output is normal, and then selectwhether there ...

When the TV malfunctions, you can get help to solve the problem. Press button on the remote control and select Support Quick Help . You can also long-press the number 9 button of the remote control to run the Quick Help . Optimisation Settings You can automatically check the overall status of your T...

after the TV is turned on at the time set by Reminder or Power On Timer . There is also a chance that the internal protection circuitry has activated because theinternal temperature of the product has risen unusually or excessively. If you are using a set-top box, the TV may be set to turn off when ...

The screen is in black and white or displaying strange colours. Check the input mode or cable connection. Go to to choose the connected input. When you are connecting to the AV IN , check to ensure each cable is matched with the corresponding color connection. AV IN port is available in certain mode...

Troubleshooting PC Connection Issues Troubleshooting PC Connection Issues Run Home Dashboard by pressing the button on the remote control. Select Edit Inputs in the upper right corner. In the Edit mode, set the icon of the HDMI terminal connected to the PC to PC to apply the video and aspect ratio s...

Troubleshooting Movie Playback Issues Troubleshooting Movie Playback Issues If you experience any of the problems below while using the product, please check thefollowing: There may be no problem with the product. More information about supported files can be found in Being Aware of the Information ...

I cannot see the subtitles. Check that the file plays without any problems on the video player on a PC. (Check forfile damage.) Check that the video and subtitle files have the same name. Also check that both the video file and the subtitle file are in the same folder. Check that the subtitle file f...

Some USB storage devices require formatting on your TV. Formatting deletes all datastored on the USB storage device, and the device is formatted with the FAT32, exFAT orNTFS file system. Before you connect a USB storage device to your TV, back up anydata that is stored on your device to your PC. Whi...

Check the AP (Router) or consult your Internet service provider. Unplug the router/cable modem from the wall outlet, wait 10 seconds and reconnect it. Initialize (Reset) the AP (Router) or cable modem. Check that the MAC address of the TV/AP (Router) is registered with your Internetservice provider....

I wish to delete the usage history on the TV. When you use the TV after logging in to your LG account, the usage history will be savedand you can delete it at any time. I wish to close my account on the TV. You can also close your LG account on the TV as follows. In some countries, access to the web...

If you cannot see some apps, it may be because you deleted them. Please reinstall theappropriate app. If the app is deleted, you can download the app at Apps and reinstall it. Go to Apps to find and install the app you want. The type of supported content differs by country. The content offerings are...

before the change, and is only applied to tabs opened after the change. Being Aware of the Information Supported Photo File Formats Supported Photo File Formats File Format Format Resolution jpeg, jpg, jpe JPEG Minimum : 64 × 64 Maximum Normal Type : 15360 (W) × 8640 (H) Progressive Type : 4800 (W) ...

Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital,LPCM, ADPCM mp4 m4v mov Video H.264/AVC, MPEG-4, HEVC, AV1, VVC Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3),Dolby AC-4 3gp 3g2 Video H.264/AVC, MPEG-4 Audio AAC, AMR-NB, AMR-WB mkv Video MPEG-2, MPEG-4, H.264/AV...

Some user-created subtitles may not work properly. A video file and its subtitle file must be in the same folder. For subtitles to be displayedproperly, make sure that the video file and the subtitle file have the same name. Subtitles on a Network Attached Storage (NAS) device may not be supported d...

Channels mono, stereo The number of supported programmes may vary depending on the sample frequency. Supported Resolution : HDMI-DTV HDMI-DTV Supported Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 × 480p 31.46 59.94 31.5 60 720 × 480p 31.46 59.94 31.5 60 720 × 576p 31.25 50...

1) Supported when HDMI Deep Colour is set to 4K . 2) Supported when Wide Aspect Ratio is set to 21:9 . 3) Supported when Wide Aspect Ratio is set to 32:9 . Supported Resolution : HDMI-PC HDMI-PC Supported Mode Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 640 × 350 31.46 70.09 720 × 40...

License Information License Information Supported licenses may differ by model. Dolby Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, DolbyVision IQ, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks ofDolby Laboratories Licensing Corporation. HDMI The terms H...