Page 2 - ENG; ENGLISH; TABLE OF CONTENTS
2 ENG ENGLISH TABLE OF CONTENTS TABLE OF CONTENTS 3 LICENSES 4 ASSEMBLING AND PREPARING 4 Accessories5 Parts6 To Install in a Portrait Layout 7 STORAGE METHOD FOR PANEL PROTECTION 7 - Correct Method 7 - Incorrect Method 8 Installing on a Wall 10 IR Receiver Connection10 - IR RECEIVER 11 Tiling Displ...
Page 3 - NOTE; LICENSES; video. To play purchased DivX movies, first register your device at
ENGLISH 3 LICENSES y y Product damage from moving or changing the installation location is not covered by warranty. y y The warranty will not cover any damages caused by using the product in an excessively dusty environment. NOTE LICENSES Supported licenses may differ by model. For more information ...
Page 4 - ASSEMBLING AND PREPARING; CAUTION; Accessories
4 ENG ENGLISH ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING y y Do not use any unauthorized or aftermarket items to ensure the safety and product life span. y y Any damages or injuries by using unauthorized or aftermarket items are not covered by the warranty. CAUTION y y The accessories provide...
Page 5 - Parts; Connection panel
5 ENG ENGLISH ASSEMBLING AND PREPARING Parts USB LAN DVI IN DVI OUT IN OUT IN RGB/ AV /COMPONENT IN IR IN Connection panel
Page 6 - To Install in a Portrait Layout
6 ENG ENGLISH ASSEMBLING AND PREPARING To Install in a Portrait Layout When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
Page 7 - Correct Method; STORAGE METHOD FOR PANEL PROTECTION
7 ENG ENGLISH ASSEMBLING AND PREPARING Correct Method Incorrect Method STORAGE METHOD FOR PANEL PROTECTION Panel Panel If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel not to touch the floor. When laying down the product, l...
Page 8 - the wall, make sure that sufficient ventilation; Installing on a Wall
8 ENG ENGLISH ASSEMBLING AND PREPARING y y Disconnect the power cord first, and then move or install the monitor set. Otherwise electric shock may occur. y y If you install the monitor set on a ceiling or slanted wall, it may fall and result in severe injury. y y Do not over tighten the screws as th...
Page 9 - Securing the product to a wall (optional)
9 ENG ENGLISH ASSEMBLING AND PREPARING Securing the product to a wall (optional) (Depending on model) 1 Insert and tighten the eye-bolts, or product brackets and bolts on the back of the product.- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall bracket...
Page 10 - IR RECEIVER CONNECTION; IR RECEIVER
10 ENG ENGLISH ASSEMBLING AND PREPARING IR RECEIVER CONNECTION IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. IR IN IR IN 55LV35A 47LV35A
Page 11 - How to Mount the Set; Tiling Displays; Example of 2 x 2 Tiling; Screws for attaching the
11 ENG ENGLISH ASSEMBLING AND PREPARING How to Mount the Set Tiling Displays Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall. <Rear view of the set with the wall mount plate> Screws for attaching the VESA wall mount ...
Page 12 - Screws for attaching
12 ENG ENGLISH ASSEMBLING AND PREPARING 16-M4 Screw 55LV35A Screws for attaching the VESA wall mount 600 400 <Rear view of the set with the wall mount plate> ≤ 6 mm (0.2 inches)
Page 13 - How to Join Sets; Now the 2 x 2 tiling is complete.
13 ENG ENGLISH ASSEMBLING AND PREPARING Set 4 joined to the rest of the sets(2 x 2 tiling) How to Join Sets y y The load applied to each set should be supported by the wall mount plate or the wall using a VESA wall mount (600 x 400). y y The load applied to each set should be supported by the wall m...
Page 15 - REMOTE CONTROL; CLEAR
15 ENG ENGLISH REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly.To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label ...
Page 16 - Enters the White Balance
16 ENG ENGLISH REMOTE CONTROL W.BAL Enters the White Balance menu. Navigation Buttons Scrolls through menus or options. S.MENU (SuperSign Menu Key) This button does not apply to this model. EXIT Clears all on-screen displays and returns to Monitor set viewing from any menu. TILE Selects the TILE Mod...
Page 17 - Displaying the Device Name Connected to an Input Port; Display which devices are connected to which
17 ENG ENGLISH REMOTE CONTROL Displaying the Device Name Connected to an Input Port Display which devices are connected to which external input ports. 1 Access the Input list screen and press the red (input label) button on the remote control. 2 You can assign an input label for every input except U...
Page 18 - Connecting to a PC; configuration or user intervention when powering up.; MAKING CONNECTIONS
18 ENG ENGLISH MAKING CONNECTIONS Connecting to a PC The illustrations may differ from the actual accessories. Some of the cables are not provided. This monitor supports the Plug & Play* feature. * Plug & Play: a feature that enables a PC to recognize devices attached by the user without dev...
Page 19 - Use a High Speed HDMI
19 ENG ENGLISH MAKING CONNECTIONS y y Use a High Speed HDMI ® /™ Cable. y y If you want to use HDMI-PC mode, you must set the input label to PC mode. y y When HDMI PC is used, a compatiblity problem could occur. y y Use a certified cable with the HDMI logo attached. If you do not use a certified HDM...
Page 20 - External Device Connection
20 ENG ENGLISH MAKING CONNECTIONS IN OUT USB IN LAN DVI IN DVI OUT RGB/ AV IR IN DVI OUT Network /COMPONENT IN HDMI External Device Connection Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.The illustrations may differ from the actual accessories. Some ...
Page 21 - Using the Input List; Press; INPUT; to access the input source list.; OK; Input source; Adjusting Aspect Ratio; ARC; while you are watching
21 ENG ENGLISH MAKING CONNECTIONS Using the Input List 1 Press INPUT to access the input source list. 2 Press the navigation buttons to scroll to one of the input sources and press OK . Input source Description AV Watch video from a VCR or other external devices. Component Watch the content from a D...
Page 22 - Zoom; Just Scan
22 ENG ENGLISH MAKING CONNECTIONS - 4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. - Zoom : This selection will allow you to view the picture without any alteration while filling the entire scr...
Page 23 - ENTERTAINMENT; Connecting to a Wired Network; SETTINGS; Internet
23 ENG ENGLISH ENTERTAINMENT ENTERTAINMENT Connecting to a Wired Network Connect the display to a local area network (LAN) via the LAN port as shown on the following illustra-tion and set up the network settings.Only supports wired network connection.After making a physical connection, a small numbe...
Page 24 - Tips for Network Setting; Network Status; Option; Test; Network Setting
24 ENG ENGLISH ENTERTAINMENT Tips for Network Setting y y Use a standard LAN cable with this display. Cat5 or better with a RJ45 connector. y y Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the network, quickly po...
Page 25 - Tips for Using USB Storage Devices; Only a USB storage device is recognizable.; Using the My Media; Connecting USB Storage Devices; or
25 ENG ENGLISH ENTERTAINMENT Tips for Using USB Storage Devices y y Only a USB storage device is recognizable. y y If the USB storage device is connected through a USB hub, the device is not recog-nizable. y y A USB storage device using an automatic recognition programme may not be recog-nized. y y ...
Page 27 - Browsing Files; Description; All Media
27 ENG ENGLISH ENTERTAINMENT Browsing Files Browse files saved in a USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the search button to scroll to MY MEDIA and press OK . 3 Press the Search button to go to the Movie List , Photo List or Content List that you want, and press OK ...
Page 28 - File Extensions; Supported file format
28 ENG ENGLISH ENTERTAINMENT Type Supported file format Movie Codec Media Container Profile Video MPEG1 / MPEG2 DAT, MPG, MPEG, DVD, TS, TP 1080p @ 30 fps MPEG4(DivX 3.11, DivX 4, DivX 5, DivX 6, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2) AVI, DIVX, MP4, MKV, TS, TRP 1080p @ 30 fps H.264 AV...
Page 29 - Viewing Movies; Movie List
29 ENG ENGLISH ENTERTAINMENT Viewing Movies Plays movie files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK . 3 Press the navigation button to scroll to Movie List and press OK . 4 Press the navigation butt...
Page 30 - Tips for using playing video files; HTML tags are not supported in subtitles.; Remote; During movie playback, press; to access the following settings.; Selects the desired point and plays.
30 ENG ENGLISH ENTERTAINMENT Tips for using playing video files y y Some user-created subtitles may not work properly. y y Some special characters are not supported in subtitles. y y HTML tags are not supported in subtitles. y y Subtitles in languages other than the sup-ported languages are not avai...
Page 32 - Viewing Photos; Photo List
32 ENG ENGLISH ENTERTAINMENT Viewing Photos View image files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK . 3 Press the navigation button to scroll to Photo List and press OK . 4 Press the navigation butto...
Page 33 - Menu
33 ENG ENGLISH ENTERTAINMENT Photo options 1 Press SETTINGS to show the Option menus. 2 Press the navigation buttons to scroll to Set Photo View , Set Video. and press OK . y y The option values changed in Movie List do not affect Photo List .Therefore, they are not affected by option values changed...
Page 34 - Viewing the Contents List; Contents List
34 ENG ENGLISH ENTERTAINMENT Viewing the Contents List Plays back the stored files using the Export option in SuperSign Manager . 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK . 3 Press the navigation button to scroll to Contents List and ...
Page 35 - DivX
35 ENG ENGLISH ENTERTAINMENT DivX ® VOD Guide DivX ® VOD Registration In order to play purchased or rented DivX ® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. 1 Press SETTINGS to access the main menus. 2 Press the navigation...
Page 36 - CUSTOMIZING SETTINGS; Accessing Main Menus
36 ENG ENGLISH CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing Main Menus 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . 4 W...
Page 37 - PICTURE Settings
37 ENG ENGLISH CUSTOMIZING SETTINGS PICTURE Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK ....
Page 38 - Basic image options; Picture Mode
38 ENG ENGLISH CUSTOMIZING SETTINGS Basic image options Setting Description Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contra...
Page 40 - TIME Settings; Setting; Automatic; TIME
40 ENG ENGLISH CUSTOMIZING SETTINGS TIME Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to TIME and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK . 4 Whe...
Page 41 - OPTION Settings
41 ENG ENGLISH CUSTOMIZING SETTINGS OPTION Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to OPTION and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK . 4...
Page 42 - NETWORK Settings; NETWORK
42 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Network Setting Configure the network settings. Network Status Display the network status. NETWORK Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press OK . 3 Press the navigation but...
Page 43 - Tile Mode
43 ENG ENGLISH CUSTOMIZING SETTINGS Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. Tile Mode - Natural mode When active, the part of the image that would normally be displayed in the gap between the monitors is omitted. ID 1 ID 2 ID 3 ID 4 ID 1 ID 2 ID ...
Page 44 - Close; Off
44 ENG ENGLISH CUSTOMIZING SETTINGS 1 Press the red ON button on the remote control to assign the Picture ID. 2 T o change the Picture ID, press the ON button, or the left and right arrow buttons continuously. Assign the ID you want. y y If you assign the Set ID to each set with multi-vision, and th...
Page 45 - Daisy Chain Monitors
45 ENG ENGLISH CUSTOMIZING SETTINGS Daisy Chain Monitors Use this function to share the DVI video signal with other monitors without having to use a separate signal splitter box. • To use different products connected to each other Connect one end of the signal input cable (DVI Cable) to the DVI OUT ...
Page 46 - TROUBLESHOOTING; No image is displayed
46 ENG ENGLISH TROUBLESHOOTING TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord connected? y See if the power cord is properly connected to the outlet. Power is on, but the screen appears extremely dark. y Adjust brightness and contrast again. y Backlight may need r...
Page 47 - Screen color is abnormal.; The power suddenly turned off.
47 ENG ENGLISH TROUBLESHOOTING Screen color is abnormal. Problem Resolution Screen has poor color resolution (16 colors). y Set the number of colors to more than 24 bits (true color) Select Control Panel - Display - Settings - Color Table menu in Windows. Screen color is unstable or mono-colored. y ...
Page 48 - What is image sticking?; Recommended operating conditions; Change the background and the character
48 ENG ENGLISH TROUBLESHOOTING y y The software version can be updated for improvement in performance. Customer needs to ensure the compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and upload revised software version to the product according to the guidance...
Page 49 - SPECIFICATIONS
49 ENG ENGLISH SPECIFICATIONS SPECIFICATIONS LCD Panel Screen Type 119.2 cm TFT (Thin Film Transistor)LCD (Liquid Crystal Display) Panel.Visible diagonal size : 119.2 cm47" class (46.9" / 119.2 cm diagonal) Pixel Pitch 0.5415 mm (H) X 0.5415 mm (V) Video Signal Max. Resolution 1920 x 1080 @ ...
Page 51 - Component supported mode
51 ENG ENGLISH SPECIFICATIONS RGB (PC) supported mode Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 640 x 480 31.469 59.94 720 x 400 31.468 70.8 800 x 600 37.879 60.317 1024 x 768 48.363 60 1280 x 720 44.772 59.855 1280 X 960 60 60 1152 X 864 57.717 59.934 1280 x 1024 63.981 60.02 1920...
Page 52 - IR CODES; All models do not support the HDMI/USB function.
52 ENG ENGLISH IR CODES Code (Hexa) Function Note 08 ( Power) R/C BUTTON 0B INPUT R/C BUTTON C4 MONITOR ON R/C BUTTON C5 MONITOR OFF R/C BUTTON 95 ENERGY SAVING ( ) R/C BUTTON DC 3D R/C BUTTON 10 to 19 Number Key 0 to 9 R/C BUTTON 32 1/a/A R/C BUTTON 2F CLEAR R/C BUTTON 02 Volume R/C BUTTON 03 Volum...
Page 53 - CONTROLLING THE MULTIPLE PRODUCT; Connecting the cable; Connect the RS-232C cable as shown in the picture.; Communication Parameter; Communication Code : ASCII code; RS-232C Configurations
53 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT y y Use this method to connect several products to a single PC. You can control several products at one time by connecting them to a single PC. y y In the Option menu, Set ID must be between 1 and 255 (or from 1 to 1,00...
Page 54 - Command Reference List; COMMAND
54 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT Command Reference List COMMAND DATA (Hexadecimal) 1 2 01 Power k a 00 to 01 02 Select input x b See [Select input] 03 Aspect ratio k c See [Aspect ratio] 04 Energy saving j q See [Energy saving] 05 Picture mode d x See [Picture mode] 06 Contrast k g 00...
Page 55 - Some commands are not supported depending on the model.; f f; result in order to be compatible with SuperSign program.
55 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT y y During USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c) are not executed and treated as NG. y y Some commands are not supported depending on the model. y y The f f command which shows the status of a certain command...
Page 56 - Transmission / Receiving Protocol; Transmission; Command2
56 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: First command to control the set.* [Command2]: Second command to control the set.* [Set ID]: Used for selecting a set you want to control. A Set I...
Page 67 - Temporary noise is normal when powering ON or; WARNING; -This equipment is compliant with
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL Temporary noi...
Page 68 - USER GUIDE
www.lg.com Please read this manual carefully before operating your set and retain it for future reference. LG Digital Signage (MONITOR SIGNAGE) USER GUIDE L14
Page 70 - USING THE MONITOR; AV
3 ENG ENGLISH Using the Input List 1 Press INPUT to access the input source list. 2 Press the navigation buttons to scroll to one of the input sources and press OK . Adjusting Aspect Ratio Resize the image to view the image at its optimal size by pressing ARC while you are watching Monitor set. y y ...
Page 71 - both the left and right of the screen.
4 ENG ENGLISH y y 16:9 This selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). y y Just Scan This Selection will allow you view the picture of best quality without loss of original picture in high reso...
Page 76 - Type
9 ENG ENGLISH Browsing Files Browse files saved in a USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the search button to scroll to MY MEDIA and press OK . 3 Press the Search button to go to the Movie List , Photo List or Content List that you want, and press OK . Type Supporte...
Page 77 - MY MEDIA; Go to upper folder :
10 ENG ENGLISH Viewing Movies Plays movie files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK . 3 Press the navigation button to scroll to Movie List and press OK . 4 Press the navigation buttons to scroll ...
Page 79 - Select the appropriate code page for the subtitle files.; Select
12 ENG ENGLISH y y Only 10,000 of sync blocks can be supported within the subtitle file. y y When playing a video, you can adjust the picture size by pressing the ARC button. y y Subtitles in your language are only supported when the OSD menu is also in this language. y y The code page options may b...
Page 83 - DivX® VOD Guide
16 ENG ENGLISH DivX® VOD Guide DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registra-tion code from your device at www.divx.com/vod. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scro...
Page 85 - PICTURE
18 ENG ENGLISH PICTURE Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK . 4 When you are finis...
Page 86 - Return to default settings by clicking; General
19 ENG ENGLISH Basic image options Setting Description Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contrast Increases or decre...
Page 88 - Automatic Standby
21 ENG ENGLISH TIME Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to TIME and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK . 4 When you are finished, p...
Page 89 - OPTION
22 ENG ENGLISH OPTION Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to OPTION and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK . 4 When you are finishe...
Page 93 - PICTURE ID; ON
26 ENG ENGLISH PICTURE ID Picture ID is used to change the settings of a specific display using a single IR receiver for multi-vision. The set receiving the IR signal communicates with another set via an RS-232C connection. Each set is identified by a Set ID. If you assign the Picture ID using the r...
Page 97 - * Some commands are not supported depending on the model.
30 ENG ENGLISH Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [ Command1 ]: First command to control the set. * [ Command2 ]: Second command to control the set. * [ Set ID ]: Used for selecting a set you want to control. A Set ID can be assigned to each...
Page 99 - Data; Data; Data; Data
32 ENG ENGLISH 07. Brightness (Command: k h) Adjusts the screen brightness. Transmission[k][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Acknowledgement[h][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) Adjusts the screen sharpness. Transmission[k][k][ ][Set ID][ ][Data]...
Page 100 - V position; Sound mode; Mute
33 ENG ENGLISH 13. V position (Command: f r) Adjusts the vertical position of the screen.This function is only available when the Tile Mode is set to Off.* The operational range varies depending on the RGB input resolution.(Only available in RGB-PC input mode) Transmission[f ][r][ ][Set ID][ ][Data]...
Page 101 - Volume; Off time schedule
34 ENG ENGLISH 19. Volume (Command: k f ) Adjusts the playback volume. Transmission [k][f ][ ][Set ID][ ][Data][Cr] Data 00 to 64: Volume 0 to 100 Acknowledgement [f ][ ][Set ID][ ][OK/NG][Data][x] ** This may not be supported on some models. 20. Clock 1 (year/month/day) (Command: f a) Adjusts the C...
Page 103 - On timer input; Auto off; Language; ISM method
36 ENG ENGLISH 26. On timer input (Command: f u) Adds a new schedule entry by selecting input for the current on timer setting. Transmission [f ][u][ ][Set ID][ ][Data1][Cr] [f ][u][ ][Set ID][ ][Data1][Data2][Cr] Data (adding schedule) 60: RGB90: HDMI (HDMI1) Data1 1. f1h to f7h (reading data)F1: S...
Page 105 - White balance red gain
38 ENG ENGLISH 42. Power On Delay (Command: f h) To set the schedule delay when the power is turned on. (Unit: Second) Transmission[f ][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: min. 0 to max. 100 (sec.) Acknowledgement[h][ ][Set ID][ ][OK/NG][Data][x] 37. White balance red gain (Command: j m) Adjus...
Page 109 - ACCESSING INSTALLATION MENU; Accessing Installation Menu; Installation Menu
1 ENG ENGLISH ACCESSING INSTALLATION MENU Accessing Installation Menu 1 Press and hold the SETTINGS button for more than 5 seconds. PICTURE OPTION NETWORK TIME MY MEDIA INPUT or PICTURE OPTION AUDIO NETWORK TIME MY MEDIA 2 Press the 0 button four times. Press the OK button. or HDMI DTV No Signal HDM...
Page 110 - Default values may differ by region.; The LG Digital Signage Setup menu
2 ENG ENGLISH ACCESSING INSTALLATION MENU Installation Menu NOTE y y Default values may differ by region. The LG Digital Signage Setup menu This menu is used after installation to configure the Digital Signage. LG Digital Signage Setup USB CloningPassword ChangeSet ID SetupConfiguration SetupLock Mo...
Page 111 - When all IR key signals or all local key signals are blocked, the
3 ENG ENGLISH ACCESSING INSTALLATION MENU Key Operation y y This feature manages the usability of the local/front keys and your remote control with regard to their operations. This feature works according to the IR Operation and Local Key Operation settings. (It may not work depending upon the model...
Page 115 - Confirm; Item; IP
7 ENG ENGLISH ACCESSING INSTALLATION MENU LG Digital Signage Setup Initial setting/ Factory Reset Signage Mode Operation Signage Mode Operation Yes/ No NO Yes NO Power On Status STD/ PWR/ LST STD (Actual operations are performed in LST status) User STD (Actual operations are performed in LST status)...
Page 116 - To use the; USB Cloning; Ez Download; Select a list to download and press the Apply button.; The user interface for; No Signal Image Download; can be correctly displayed only in English.
8 ENG ENGLISH ACCESSING INSTALLATION MENU USB Cloning The administrator can configure a monitor more quickly through USB and configure multiple monitors simultaneously. All monitors that have been configured this way operate according to the settings of the same master monitor.This newer procedure s...
Page 117 - Send to USB; Model TLL; for; Global TLL
9 ENG ENGLISH ACCESSING INSTALLATION MENU Receive from USB Receive from USB GlobalClone00001.TLL GlobalClone99999.TLL Select file type Global TLL Model TLL OK Previous USB Cloning Ez Download Receive from USB Send to USBLogo Image DownloadNo Signal Image Download Send to Daisy Chain OK Previous 1 Us...
Page 118 - No signal Image Download
10 ENG ENGLISH ACCESSING INSTALLATION MENU Logo Image Download You can download a Splash Image file on your monitor. Make a LG_DTV folder on the USB flash drive and then copy the splash image file to that folder. 1 Use the button to select the desired file name and press the OK button. Logo Image Do...
Page 119 - Send to daisy chain; After selecting; Send to Daisy Chain; to send the data or
11 ENG ENGLISH ACCESSING INSTALLATION MENU Send to daisy chain This function is provided to copy the product settings to other sets using RS232C. 1 You can send the settings for the current set to other sets using the RS232C output. 2 The settings of the first set, which is RS232C daisy chained, are...
Page 120 - You can change the password for security.; Change Password; Enter the same number again in; Confirm Password; to confirm the password.
12 ENG ENGLISH ACCESSING INSTALLATION MENU Password Change You can change the password for security. Enter a new 4-digit number in Change Password . Enter the same number again in Confirm Password to confirm the password. Password Change Change PasswordConfirm Password ** ** ** ** OK Previous S/W : ...
Page 126 - SuperSign Server Setup; Not connected
18 ENG ENGLISH ACCESSING INSTALLATION MENU SuperSign Server Setup This feature is for a linkage with SuperSign Manager. Fail Over ModeUSBPriority1Priority2Priority3 ---------- Off OK Previous ----- Off S/W : xx.xx.xx.xx Micom : x.xx.x OK Installation Menu (V 3.0) LG Digital Signage SetupUSB CloningP...
Page 127 - This feature is for a linkage with SuperSign Manager.; Adjusts the backlight according to the schedule you set.
19 ENG ENGLISH ACCESSING INSTALLATION MENU Easy Brightness Control This feature is for a linkage with SuperSign Manager. S/W : xx.xx.xx.xx Micom : x.xx.x OK Installation Menu (V 3.0) LG Digital Signage SetupUSB CloningPassword ChangeSet ID SetupConfiguration SetupLock ModeFail OverSuperSign Server S...
