Page 2 - ENGLISH; IMPORTANT SAFETY INSTRUCTIONS; WARNING; WARNING; Wash hands after handling.
ENGLISH 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. y y Do not use this apparatus near water. Short-circuit Breaker Power Supply y y Clean only with a dry cloth. ...
Page 3 - Warning
ENGLISH 3 IMPORTANT SAFETY INSTRUCTIONS y y Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Short-circuit Breaker Power Supply y y Only use attachments/accessories specified by the manufacturer. ...
Page 5 - Dot Defect; FCC NOTICE; NOTE TO CABLE/TV INSTALLER
ENGLISH 5 IMPORTANT SAFETY INSTRUCTIONS y y Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affec...
Page 6 - Viewing 3D Imaging
ENGLISH 6 IMPORTANT SAFETY INSTRUCTIONS Viewing 3D Imaging WARNING Viewing Environment y y Viewing Time - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensit...
Page 7 - LICENSES
ENGLISH 7 LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI...
Page 8 - TABLE OF CONTENTS; NOTE
ENGLISH 8 TABLE OF CONTENTS TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 6 Viewing 3D Imaging 7 LICENSES 7 OPEN SOURCE SOFTWARE NOTICE 8 TABLE OF CONTENTS 9 INSTALLATION PROCEdURE 9 ASSEMBLING ANd PREPARING 9 Unpacking 11 Optional Extras 12 Parts and Buttons 13 Using the Smart Touch Button 14 L...
Page 9 - INSTALLATION PROCEdURE; ASSEMBLING ANd PREPARING; Unpacking; CAUTION
ENGLISH 9 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEdURE 1 Open the package and make sure all the accessories are included. 2 Connect an external device to the TV set. 3 Make sure the network connection is available. You can use the TV network functions only when the networ...
Page 11 - Optional Extras; LG Audio Device
ENGLISH 11 ASSEMBLING AND PREPARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification.Contact your dealer to buy these items.These devices only work with certain models.The model name or design may be changed manufacturer’s circumstances or p...
Page 12 - Parts and Buttons
ENGLISH 12 ASSEMBLING AND PREPARING Parts and Buttons Button Description Turns the power on or off. Smart Touch Button Remote control sensor LG Logo Light Screen Speakers Clear Speaker
Page 13 - Using the Smart Touch Button; To Turn the TV On; Smart Touch Button; To Use the Smart Touch Button
ENGLISH 13 ASSEMBLING AND PREPARING Using the Smart Touch Button 1 To Turn the TV On - Gently press the smart touch button just below the LG logo light at the bottom of the TV. 2 To Turn the TV Off - If the touch menu is not displayed on the screen, press the smart touch button for about two seconds...
Page 14 - Lifting and Moving the TV
ENGLISH 14 ASSEMBLING AND PREPARING Lifting and Moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. y y Avoid touching the screen at all times, as this may result in damage to t...
Page 15 - Setting up the TV; Attaching the AV cover; Mounting on a Table
ENGLISH 15 ASSEMBLING AND PREPARING Setting up the TV Attaching the AV cover Please assemble the AV cover as shown in the figure. AV cover Mounting on a Table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. 1...
Page 16 - Tidying Cables; Cable; Cable Band
ENGLISH 16 ASSEMBLING AND PREPARING Tidying Cables 1 Fix the Cable Management with screw and arrange the cables. Cable Management M4 x L20 1 EA 2 Wrap the arranged cables with the Cable Band, then pull the zip down. Cable Band y y Do not move the TV by holding the cable management and cable band, as...
Page 17 - Using Video Call Camera; Front; Rear; Product Handling; Installation Instructions
ENGLISH 17 ASSEMBLING AND PREPARING Using Video Call Camera Front Microphones Lens Stand Activity Indicator Rear USB Cable Stand-Arm Stand-Cable holder Stand-Bottom Product Handling y y Do not let the camera get wet. Liquid getting into the camera could cause a short circuit. y y Wipe the camera gen...
Page 18 - Preparing Video Call Camera
ENGLISH 18 ASSEMBLING AND PREPARING 1 Unfold the stand and put it on the top center of the TV set. Video Call Camera TV 2 Bend the stand of the video call camera. TV Video Call Camera 3 Firmly attach the TV stand to the back of the TV set using the velcro tape. Velcro tape 4 Insert the video call ca...
Page 19 - MAKING CONNECTIONS; Connecting to an Antenna or Cable
ENGLISH 19 MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connecti...
Page 20 - Connecting to a HD Receiver, DVD Player or VCR; HDMI Connection; HDMI is the best way to connect a device.
ENGLISH 20 MAKING CONNECTIONS Connecting to a HD Receiver, DVD Player or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV...
Page 21 - DVI to HDMI Connection
ENGLISH 21 MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. y y When using the HD...
Page 22 - Connecting to a Mobile Phone
ENGLISH 22 MAKING CONNECTIONS Connecting to a Mobile Phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. y y Connect the mobile phone to the HDMI IN 4 (MHL) port to view the phone screen on the TV. y y This only...
Page 23 - Component Connection; IN
ENGLISH 23 MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. y y If cables are installed incorrectly, it could cause the image to di...
Page 24 - Composite Connection
ENGLISH 24 MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. y y If you have a mono VCR, connect the audio cable from the VCR to t...
Page 25 - Connecting a PC; HDMI Connection or DVI to HDMI Connection; Choose method A or B to make connection.; Method A: HdMI Connection
ENGLISH 25 MAKING CONNECTIONS Connecting a PC y y It is recommended to use an HDMI connection for the best image quality. y y Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. y y In PC mode, there may be noise associated with the resolution, vertical patt...
Page 26 - Method B: dVI to HdMI Connection
ENGLISH 26 MAKING CONNECTIONS Method B: dVI to HdMI Connection AUDIO OUT DVI OUT HDMI PC (*Not Provided) (*Not Provided) YELLOW Choose any HDMI input port to connect. It does not matter which port you use.
Page 27 - Connecting to an Audio System; Digital Optical Audio Connection
ENGLISH 27 MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audi...
Page 28 - Connecting Headphones; Connecting a USB Device
ENGLISH 28 MAKING CONNECTIONS Connecting Headphones Listening to sound with headphones. y y Do not use headsets (earphones) at high volume or for a long time. It may cause damage to your hearing. y y AUDIO menu options are disabled when headphones are connected. y y When changing AV MODE with a head...
Page 29 - MAGIC REMOTE CONTROL FUNCTIONS; Voice recognition
ENGLISH 29 MAGIC REMOTE CONTROL FUNCTIONS MAGIC REMOTE CONTROL FUNCTIONS When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the...
Page 30 - Registering Magic Remote Control; How to register the Magic Remote Control; BACK; How to Use Magic Remote Control
ENGLISH 30 MAGIC REMOTE CONTROL FUNCTIONS Registering Magic Remote Control The Magic Remote Control operates by pairing with your TV. Please register the remote as follows. How to register the Magic Remote Control (Wheel) To register automatically, turn the TV on and press the Wheel (OK) . When regi...
Page 31 - WATCHING TV; Turning the TV on for the First Time
ENGLISH 31 WATCHING TV WATCHING TV Turning the TV on for the First Time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In Standby mode, press the power button on the rem...
Page 32 - USING THE USER GUIdE; User Guide
ENGLISH 32 USING THE USER GUIDE USING THE USER GUIdE User Guide allows you to access detailed TV information easily. 1 Press SMART button to access the Smart Home menu. 2 Select User Guide and press the Wheel (OK) button. User Guide To use input device To set time options To set language To set ca...
Page 33 - SPECIFICATIONS
ENGLISH 33 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement AC 120 V ~ 50 / 60 Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 Ex...
Page 34 - Component supported mode
ENGLISH 34 SPECIFICATIONS HDMI (DTV) supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720 x 480 31.469 31.50 59.94 60.00 1280 x 720 44.96 45.00 59.94 60.00 1920 x 1080 33.72 33.75 26.97 27.000 33.716 33.75 67.43 67.500 59.94 60.00 23.97 24.000 29.976 30.00 59.94 60 Compon...
Page 35 - Video Call Camera information
ENGLISH 35 SPECIFICATIONS Video Call Camera information MODELS AN-VC5** (Video Call Camera) Dimensions (Width x Height x Depth) 112 x 56 x 38 (mm) 4.4 x 2.2 x 1.4 (inches) Weight 107.8 g (0.2 Ibs) Video Lens Focus More than 100 cm Field of Vision 61.25° in diagonal Effective pixels 1920 x 1080 Outpu...
Page 36 - D supported mode
ENGLISH 36 SPECIFICATIONS 3D supported mode y y Video, which is input as below media contents is switched into the 3D screen automatically. 3D supported mode automatically Input Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) Playable 3D video format HDMI 1080p 54.00 24 F/P, L/A 67.50 30 2...
Page 37 - MAINTENANCE; Cleaning Your TV; Power Cord; ExTERNAL CONTROL dEVICE SETUP
ENGLISH 37 MAINTENANCE / ExTERNAL CONTROL DEVICE SETUP MAINTENANCE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product lifespan. y y Before cleaning, turn the power off and disconnect the power cord and all other cables. y y When the TV is left unattende...
Page 38 - TROUBLESHOOTING
ENGLISH 38 TROUBLESHOOTING TROUBLESHOOTING Problem Solution Cannot control the TV with the remote control. y y Check the remote control sensor on the product and try again. y y Check if there is any obstacle between the product and the remote control. y y Check if the batteries are still working and...
Page 39 - THE ISSUE; It Makes A Difference How and Where
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE • The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper s...
Page 40 - LG Customer Information Center; Register your product Online!; The model and serial number of the TV is located
LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1-888-542-2623 CANADA Register your product Online! www.lg.com The model and serial number of the TV is located on the back and one side of the TV....
Page 41 - OWNER’S MANUAL; EXTERNAL CONTROL
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com
Page 42 - KEY CODES
2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 45 Q.Menu R/C Button 01 CH -, PR - R/C Button 4C List, - (ATSC Only) R/C Button 02 Volume + R/C Button 53 List R/C Button 03 Volume - R/C B...
Page 43 - EXTERNAL CONTROL DEVICE SETUP; USB to Serial converter with USB Cable; USB Type; USB IN; which is not made nor provided by LG.
3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: T...
Page 44 - Customer Computer
4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. USB IN (TV) (P...
Page 45 - Communication Parameters; Communication code : ASCII code; Command reference list; COMMAND1 COMMAND2
5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexade...
Page 46 - Transmission / Receiving Protocol; Transmission; : Space – ASCII code ‘0x20’; OK Acknowledgement; data of the PC computer.; Error Acknowledgement; non-viable functions or communication errors.; Real data mapping (Hexadecimal
6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose des...
Page 50 - For Plasma TV
10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite) Data 03: High byte Channel Data Data 0...
