Page 2 - ENGLISH; Wash hands after handling.; IMPORTANT SAFETY INSTRUCTIONS
ENGLISH 2 IMPORTANT SAFETY INSTRUCTIONS y y Do not allow the television to become wet. Short-circuit Breaker Power Supply y y Clean only with a dry cloth. Short-circuit Breaker Power Supply y y Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Short-c...
Page 5 - FCC NOTICE; NOTE TO CABLE/TV INSTALLER
ENGLISH 5 IMPORTANT SAFETY INSTRUCTIONS y y Dot Defect The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performa...
Page 6 - LICENSES
ENGLISH 6 LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI H...
Page 7 - TABLE OF CONTENTS; NOTE
ENGLISH 7 TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 6 LICENSES 6 OPEN SOURCE SOFTWARE NOTICE 7 TABLE OF CONTENTS 8 INSTALLATION PROCEdURE 8 ASSEMBLING ANd PREPARING 8 Unpacking 10 Parts and Buttons 11 Additional information of the manual 11 Lifting and moving the TV 12 Setting up the TV 12 -...
Page 8 - INSTALLATION PROCEdURE; ASSEMBLING ANd PREPARING; Unpacking; CAUTION
ENGLISH 8 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEdURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING ANd PREPARING Unpacking Check your product box for the follow...
Page 10 - Parts and Buttons
ENGLISH 10 ASSEMBLING AND PREPARING Parts and Buttons Button Description / ( / ) Scrolls through the saved channels. / ( / ) Adjusts the volume level. ( OK ) Selects the highlighted menu option or confirms an input. ( SETTINGS ) Accesses the main menus, or saves your input and exits the menus. ( INP...
Page 11 - Lifting and moving the TV; Additional information of the; Viewing the owner’s manual
ENGLISH 11 ASSEMBLING AND PREPARING y y Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. y y Use at least two people to move a large TV. y y When transporting the TV by hand, hold the TV as shown in the following illustration...
Page 12 - Setting up the TV; Attaching the stand
ENGLISH 12 ASSEMBLING AND PREPARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. y y W...
Page 13 - Mounting on a table; Using the Kensington security system (optional); Securing the TV to a table
ENGLISH 13 ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm (4 inches) 2 Connect the power cord to a wall outlet. y y Do not place the TV ...
Page 14 - Tidying cables
ENGLISH 14 ASSEMBLING AND PREPARING Tidying cables 1 Gather and bind the cables with the cable holder. Cable Holder y y Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur. CAUTION Securing the TV to a wall (optional) (Depending...
Page 15 - Mounting on a wall
ENGLISH 15 ASSEMBLING AND PREPARING Mounting on a wall An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mo...
Page 16 - MAKING CONNECTIONS; Connecting to an antenna or cable
ENGLISH 16 MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connecti...
Page 17 - Connecting to a HD receiver, DVD Player, or VCR; HDMI Connection; IN
ENGLISH 17 MAKING CONNECTIONS Connecting to a HD receiver, DVD Player, or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the T...
Page 18 - Connecting to a mobile phone
ENGLISH 18 MAKING CONNECTIONS Connecting to a mobile phone (For LN530B, LN5300, LN5310, LN5400 series) Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. y y Connect the mobile phone to the HDMI IN 2 (MHL) port to vi...
Page 19 - Component Connection; AUDIO; VIDEO
ENGLISH 19 MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. y y If cables are installed incorrectly, it could cause the image to di...
Page 20 - Composite Connection
ENGLISH 20 MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. y y If you have a mono VCR, connect the audio cable from the VCR to t...
Page 21 - Connecting a PC
ENGLISH 21 MAKING CONNECTIONS Connecting a PC y y Use an HDMI connection for the best image quality. y y Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. y y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or b...
Page 22 - Connecting to an Audio System; Digital Optical Audio Connection
ENGLISH 22 MAKING CONNECTIONS Connecting to an Audio System (For LN530B, LN5300, LN5310, LN5400 series) You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the exte...
Page 23 - Connecting a USB Device; USB IN
ENGLISH 23 MAKING CONNECTIONS Connecting a USB Device Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV. USB IN USB (*Not Provided)
Page 24 - REMOTE CONTROL
ENGLISH 24 REMOTE CONTROL FLASHBK AUDIO REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the ...
Page 26 - WATCHING TV; Turning the TV on for the first time
ENGLISH 26 WATCHING TV WATCHING TV Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In standby mode, press the power button on the rem...
Page 27 - SPECIFICATIONS
ENGLISH 27 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement AC 100 - 240 V ~ 50 / 60 Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-...
Page 29 - Component port connecting information
ENGLISH 29 SPECIFICATIONS HDMI (PC) supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 640 x 480 31.469 59.94 800 x 600 37.879 60.31 1024 x 768 48.363 60.00 1360 x 768 47.712 60.015 1152 x 864 54.348 60.053 1280 x 1024 63.981 60...
Page 30 - TROUBLESHOOTING; General
ENGLISH 30 TROUBLESHOOTING TROUBLESHOOTING General Problem Solution Cannot control the TV with the remote control. y y Check the remote control sensor on the product and try again. y y Check if there is any obstacle between the product and the remote control. y y Check if the batteries are still wor...
Page 31 - Video; EXTERNAL CONTROL dEVICE SETUP
ENGLISH 31 TROUBLESHOOTING / EXTERNAL CONTROL DEVICE SETUP Video Problem Solution An image displays in black and white or the color quality is poor. y y Adjust the color setting in the menu option. y y Keep a sufficient distance between this product and other electronic products. y y Scroll to other...
Page 35 - THE ISSUE; It Makes A Difference How and Where
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE • The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper s...
Page 36 - LG Customer Information Center; Register your product Online!; The model and serial numbers of the TV are; MODEL
LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1-888-542-2623 CANADA Register your product Online! www.lg.com This product qualifies for ENERGY STAR in the factory default (Home Use) setting. Ch...
Page 37 - OWNER’S MANUAL; EXTERNAL CONTROL
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com
Page 38 - KEY CODES
2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 45 Q.Menu R/C Button 01 CH -, PR - R/C Button 4C List, - (ATSC Only) R/C Button 02 Volume + R/C Button 53 List R/C Button 03 Volume - R/C B...
Page 39 - EXTERNAL CONTROL DEVICE SETUP; USB to Serial converter with USB Cable; USB Type; which is not made nor provided by LG.
3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: T...
Page 40 - Customer Computer
4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. USB IN (TV) (P...
Page 41 - Communication Parameters; Communication code : ASCII code; Command reference list; COMMAND1 COMMAND2
5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexade...
Page 42 - Transmission / Receiving Protocol; Transmission; : Space – ASCII code ‘0x20’; OK Acknowledgement; data of the PC computer.; Error Acknowledgement; viable functions or communication errors.; Real data mapping (Hexadecimal
6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose des...
Page 46 - For Plasma TV
10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite) Data 03: High byte Channel Data Data 0...
