Page 2 - TABLE OF CONTENTS; ASSEMBLY AND
2 ENGLISH TABLE OF CONTENTS SAFETY PRECAUTIONS ................3 - Precautions for the AC Adapter and Power ............4 - Precautions for Moving the Product ...........................6 - Precautions for Installing the Product ........................7 - Precautions for Cleaning the Product .........
Page 3 - SAFETY PRECAUTIONS; WARNING
3 ENGLISH WARNING : This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTIONS The Safety Precautions are intended to prevent unexpected danger or harm by helping the user to use the product safely and for its in...
Page 4 - Precautions for the AC Adapter and Power
4 ENGLISH Precautions for the AC Adapter and Power WARNING • Use only the power cord or AC adapter provided or approved by LG Electronics, Inc. If you use another power cord, make sure that it is certified by the national standards. If the power cable is faulty in any way, please contact the manufac...
Page 5 - CAUTION
5 ENGLISH • If water or any foreign substance goes inside the product, disconnect the power cord immediately and contact the service center. - Otherwise, this may cause a fire or electric shock due to damage to the product. • Keep the power cord or AC adapter away from any heating devices. - The cor...
Page 6 - Precautions for Moving the Product
6 ENGLISH Precautions for Moving the Product WARNING • Contact the service center before moving the product. - It may cause electric shock and damage the product. • Make sure the product is turned off, unplugged, and all cables have been removed before the product is moved. - You may be electrocuted...
Page 7 - Precautions for Installing the Product
7 ENGLISH Precautions for Installing the Product WARNING • Contact the service center before installing the product. - It can cause electric shock and damage the product. • Do not drop an object on or impact on the product. Keep out of reach of children and do not place toys or objects near the prod...
Page 9 - Precautions for Cleaning the Product
9 ENGLISH Precautions for Cleaning the Product WARNING • Keep the product clean at all times. - If you don’t clean the unit for a long time and it becomes covered in dust, it can cause fire or product damage. • When you need to clean the inside of the product, you must contact the service center. - ...
Page 10 - Precautions for Using the Product
10 ENGLISH Precautions for Using the Product WARNING • Do not use the product in any environment with excessively high temperatures or humidity. • If you use the product for a long period of time, take a rest from time to time to protect your vision. - Extended viewing could result in impaired visio...
Page 12 - Precautions for Using the Remote control
12 ENGLISH Precautions for Using the Remote control WARNING • Avoid places with high humidity. - It may cause electrical shock or damage the product. • Do not expose batteries to excessive heat, such as direct sunlight, open fireplace, and electric heaters. - It may cause fire and you may be injured...
Page 13 - Precautions for Experiencing Image Retention
13 ENGLISH Precautions for Experiencing Image Retention • Displaying a still image for a prolonged period of time may cause damage to the screen, resulting in image retention. Most third-party products have the same issue. The resulting damage is not covered by the product warranty. - Use a screen s...
Page 14 - ASSEMBLY AND PREPARATION; NOTE
14 ENGLISH ASSEMBLY AND PREPARATION CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. • When installing the product, please cover the interface completely. Also, if the...
Page 15 - Product Contents
15 ENGLISH Product Contents The image may be different according to the model. Power Indicator IR Receiver/ Illuminance sensor • IR Receiver : This is where the unit receives signals from the remote control. • Illuminance sensor : Adjusts the screen brightness by measuring the amount of light. • Pow...
Page 17 - Installing in Landscape Orientation; Installing the Product in a Tilted Position
17 ENGLISH Installing in Landscape Orientation To install in landscape orientation, rotate the screen clockwise 90 degrees while facing it from the front. IR Sensor IR Sensor Installing the Product in a Tilted Position You can install the product by tilting it horizontally or vertically.You can tilt...
Page 18 - Installation Requirements; Air flow direction
18 ENGLISH Installation Requirements Air flow direction • For cooling purposes, a fan is used to intake air through the inlet and hot air is discharged through the outlet. 49XE4F Air outlet Air inlet
Page 20 - Enclosure unit design
20 ENGLISH Enclosure unit design Partition design guide • When making a case for the enclosure, make sure to separate the inlet and outlet with a partition. • Place sponge pads, etc., between the partition and the enclosure to completely block air flow.
Page 22 - Inlet and outlet designs
22 ENGLISH Inlet and outlet designs • The aperture must be at least 50 % of the total aperture area. Single enclosure unit • Make sure to separate the inlet and outlet to prevent the air around one from entering the other. Case 1 Case 2 Partition Partition Partition
Page 28 - Surrounding Environment
28 ENGLISH Surrounding Environment • Do not allow the absorption of the product, snow, etc. to accumulate in the air inlet/outlet. • Designed for use in dusty environments. CAUTION • Do not hang the enclosure on the ceiling or lay it on the floor.
Page 29 - Installing on a Wall
29 ENGLISH Installing on a Wall For proper ventilation, make sure the product is installed at least 100 mm away from the walls on every side. Consult a professional installation company near you for details on installation. CAUTION • Disconnect the power cord before moving or installing the monitor ...
Page 30 - Clearance for Wall Mounting
30 ENGLISH Clearance for Wall Mounting When wall mounting the product, install a partition that separates the air from the inlet and exhaust. Failure to do so may result in malfunctioning of the product and will not be covered under warranty. Installing the outdoor unit only • When installing the en...
Page 32 - Clearance for Built-in Installation
32 ENGLISH Clearance for Built-in Installation Installing the outdoor unit only 100 mm 100 mm 100 mm 100 mm • For proper ventilation, make sure the product is installed at least 100 mm away from the walls on every side. • Consult a professional installation company near you for details on installati...
Page 34 - Safety and Precaution Guide for Installation
34 ENGLISH Safety and Precaution Guide for Installation Direct Sunlight • While powered off, make sure the device is not exposed to direct sunlight for a prolonged period. - Protect the display with cloth or a box when storing the device after it has been powered off. - This can prevent faults such ...
Page 35 - Caution
35 ENGLISH Preventing Condensation Caution • Attaching Screws - Attach all of the interface cover and back cover screws of the product without omission. - If you fail to fasten any of the screws, moisture may enter the product and condensation may occur. Caution • Cabling - Insert the square rubber ...
Page 39 - REMOTE CONTROL
39 ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartm...
Page 41 - MAKING CONNECTIONS; Connecting to a PC
41 ENGLISH MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect.For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cable...
Page 43 - When Installing a Media Player/PC Externally
43 ENGLISH When Installing a Media Player/PC Externally NOTE • If you set the tile mode using HDMI, you will not be able to watch HDCP-encrypted content. • If the signal cable between the product and your PC is too long, make sure to use the Booster or optical cable. • DP Cable - Use a DP cable that...
Page 44 - When Installing the HDBaseT Cable
44 ENGLISH When Installing the HDBaseT Cable The HDBaseT CABLE Install • LAN cables are fairly resilient. Yet, any rough handling, such as tight tie wraps, clamping or stapling can damage the cable, compromising performance or even preventing signal transmission. Tie cables loosely with appropriate ...
Page 46 - Using the Input List
46 ENGLISH HDBT support function 1 Set host mode (Shipment mode): , , , , 2 Set device mode (Device mode can be changed in settings.): , , , , 3 IR IN is disabled. When SET is off. 4 Even if set is off, it operates in DPM (sleep mode), WOL, SCREEN OFF & BACKLIGHT on mode. 5 The webcam connect se...
Page 47 - TROUBLESHOOTING
47 ENGLISH TROUBLESHOOTING Ů Each model may have different points to check. Ů For information on your PC settings, refer to the Windows Help. Issues Related to Use • The power won’t turn on. - Check if the power cord is correctly plugged into the power outlet. - When operating in below zero temperat...
Page 51 - PRODUCT SPECIFICATIONS
51 ENGLISH PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions.“ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT)Liquid Crystal Display (LCD) Scre...
Page 54 - LICENSES
54 ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com . The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufact...
