LG 49SE3KE-B - User Manual

ENGLISH 5 Precautions for using AC Adapter and Electrical Power WARNING • If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the power cord immediately and contact the service center. - Otherwise, this may cause a fire or electric shock due...

ENGLISH 7 Precautions For Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. • Make sure the panel faces forward ...

ENGLISH 8 Precautions For Using the Product WARNING • Do not disassemble, repair or modify the product at your own discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. • When the display is to be left unattended for an extended perio...

ENGLISH 9 • Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining. WATER CHEMICALS • Do not use products using high voltage around the Monitor. (e.g., a bug zapper) - Monitor may have malfunction as its elect...

ENGLISH 10 LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com . The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and ...

ENGLISH 11 ASSEMBLY AND PREPARATION CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. NOTE • The accessories provided with your product may vary depending on the model ...

ENGLISH 12 Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Stand kit Stand Stand Spacers Screws Diam...

ENGLISH 14 Media Player kit (It may not be supported depending on the model.) Media Player MP500/ MP700 Screws Diameter 3.0 mm x Pitch 0.5 mm x Length 6mm CD (Owner’s Manual)/ Cards Wi-Fi Dongle kit AN-WF500 NOTE • Cable holder/Cable tie may not be available in some areas or for some models. • Optio...

ENGLISH 15 Parts and Buttons The image may be different according to the model. Buttons • : Changes the input source. • : Accesses the main menus, or saves your input and exits the menus. • : Adjust the up and down. • : Moves left and right. • : Displays the current signal and mode. • : Turns the po...

ENGLISH 16 Connecting the Stand - For certain models only. - The image may be different according to the model. 32SE3KE 1 2

ENGLISH 18 Using the IR Receiver - The image may be different according to the model. This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. Install the IR receiver towards the front of the set. IR Receiver cable NOTE...

ENGLISH 19 Portrait Layout When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen). Using Kensington Lock (This is not available for all models.)The Kensington security system connector is located at the back of the monitor. For more information ...

ENGLISH 20 Attaching and removing the LG Logo Bracket - For certain models only. - The image may be different according to the model. Removing the LG Logo Bracket 1 Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Using a screwdriver, remove the screw that se...

ENGLISH 22 Installing on a Wall For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 100 mm 100 mm 100 mm 100 mm 100 mm To insta...

ENGLISH 24 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartm...

ENGLISH 26 Displaying the Device Name Connected to an Input Port Display which devices are connected to which external input ports. 1 Access the Input list screen and press the red (input label) button on the remote control. 2 You can assign an input label for every input except USB. NOTE • External...

ENGLISH 27 MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cabl...

ENGLISH 28 NOTE • For the best image quality, using the monitor with HDMI connection is recommended. • To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a D-sub 15-pin cable and DVI-D/HDMI cable. • If you turn the monitor on when the set is c...

ENGLISH 29 TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Does the “Invalid Format” message appear? • The signal from the PC (Graphics card) is out of the vertical or horizontal frequenc...

ENGLISH 32 PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions.“ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT)Liquid Crystal Display (LCD) Scre...