Page 2 - ENGLISH; IMPORTANT SAFETY INSTRUCTIONS; WARNING; Wash hands after handling.
ENGLISH 2 IMPORTANT SAFETY INSTRUCTIONS y y Do not allow the television to become wet. y y Clean only with a dry cloth. y y Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. y y Do not install near any heat sources such as radiators, heat registers, s...
Page 5 - Preventing image burn or burn-in on your
ENGLISH 5 IMPORTANT SAFETY INSTRUCTIONS y y Dot Defect The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performa...
Page 6 - FCC NOTICE; Additional information of the manual; Viewing the owner’s manual; NOTE
ENGLISH 6 IMPORTANT SAFETY INSTRUCTIONS For USA and Canada FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a re...
Page 7 - LICENSES; OPEN SOURCE SOFTWARE NOTICE
ENGLISH 7 LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI H...
Page 8 - TABLE OF CONTENTS
ENGLISH 8 TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 6 Additional information of the manual 7 LICENSES 7 OPEN SOURCE SOFTWARE NOTICE 8 TABLE OF CONTENTS 9 INSTALLATION PROCEdURE 9 ASSEMBLING ANd PREPARING 9 Unpacking 11 Parts and buttons 12 Lifting and moving the TV 13 Setting up the TV 13 - ...
Page 9 - INSTALLATION PROCEdURE; ASSEMBLING ANd PREPARING; Unpacking; CAUTION
ENGLISH 9 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEdURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING ANd PREPARING Unpacking Check your product box for the follow...
Page 11 - Parts and buttons
ENGLISH 11 ASSEMBLING AND PREPARING Parts and buttons Buttons Screen Speakers Power IndicatorRemote Control SensorIntelligent Sensor 1 Button Description / ( / ) Scrolls through the saved channels. / ( / ) Adjusts the volume level. ( OK ) Selects the highlighted menu option or confirms an input. ( S...
Page 12 - Lifting and moving the TV
ENGLISH 12 ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. y y Avoid touching the screen at all times, as this may result in damage to t...
Page 13 - Setting up the TV; Attaching the stand
ENGLISH 13 ASSEMBLING AND PREPARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. y y W...
Page 14 - Mounting on a table
ENGLISH 14 ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm (4 inches) 2 Connect the power cord to a wall outlet. y y Do not place the TV ...
Page 15 - Using the Kensington security system
ENGLISH 15 ASSEMBLING AND PREPARING Using the Kensington security system (optional) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. kensing...
Page 16 - Mounting on a wall
ENGLISH 16 ASSEMBLING AND PREPARING Mounting on a wall An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mo...
Page 17 - Tidying cables
ENGLISH 17 ASSEMBLING AND PREPARING Tidying cables 1 Install the cable holder as shown. Cable Holder 2 Gather and bind the cables with the cable holder. Cable Holder y y Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur. CAUTI...
Page 18 - MAKING CONNECTIONS; Connecting to an antenna or cable
ENGLISH 18 MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connecti...
Page 19 - Connecting to a HD receiver, DVD player, or VCR; HDMI connection; IN
ENGLISH 19 MAKING CONNECTIONS Connecting to a HD receiver, DVD player, or VCR Connect a HD receiver, DVD player, or VCR to the TV and select an appropriate input mode. HDMI connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the T...
Page 20 - Connecting to a mobile phone
ENGLISH 20 MAKING CONNECTIONS Connecting to a mobile phone (For LN5200, LN530B, LN5300, LN5310, LN5400 series)Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. y y Connect the mobile phone to the HDMI IN 2 (MHL) por...
Page 21 - Component connection; AUDIO; VIDEO
ENGLISH 21 MAKING CONNECTIONS Component connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. y y If cables are installed incorrectly, it could cause the image to di...
Page 22 - Composite connection
ENGLISH 22 MAKING CONNECTIONS Composite connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. y y If you have a mono VCR, connect the audio cable from the VCR to t...
Page 23 - Connecting a PC
ENGLISH 23 MAKING CONNECTIONS Connecting a PC y y Use an HDMI connection for the best image quality. y y Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. y y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or b...
Page 24 - Connecting to an audio system; Digital optical audio connection
ENGLISH 24 MAKING CONNECTIONS Connecting to an audio system (For LN5100, LN5200, LN530B, LN5300, LN5310, LN5400 series)You can use an optional external audio system instead of the built-in speaker. Digital optical audio connection Transmits a digital audio signal from the TV to an external device. C...
Page 25 - Connecting a USB device; USB IN
ENGLISH 25 MAKING CONNECTIONS Connecting a USB device Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV. USB IN USB (*Not provided)
Page 26 - REMOTE CONTROL
ENGLISH 26 REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside t...
Page 28 - WATCHING TV; Turning the TV on for the first
ENGLISH 28 WATCHING TV WATCHING TV Turning the TV on for the first time When you turn the TV on for the first time, the initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In standby mode, press the power button on the rem...
Page 29 - SPECIFICATIONS
ENGLISH 29 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement AC 100 - 240 V ~ 50 / 60 Hz Television System ATSC, NTSC-M, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-...
Page 31 - Component port connecting information
ENGLISH 31 SPECIFICATIONS HDMI (PC) supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 640 x 480 31.469 59.94 800 x 600 37.879 60.31 1024 x 768 48.363 60.00 1360 x 768 47.712 60.015 1152 x 864 54.348 60.053 1280 x 1024 63.981 60...
Page 32 - TROUBLESHOOTING; General
ENGLISH 32 TROUBLESHOOTING TROUBLESHOOTING General Problem Solution Cannot control the TV with the remote control. y y Check the remote control sensor on the product and try again. y y Check if there is any obstacle between the product and the remote control. y y Check if the batteries are still wor...
Page 33 - Video
ENGLISH 33 TROUBLESHOOTING Video Problem Solution An image displays in black and white or the color quality is poor. y y Adjust the color setting in the menu option. y y Keep a sufficient distance between this product and other electronic products. y y Scroll to other channels. There may a problem w...
Page 34 - EXTERNAL CONTROL dEVICE SETUP
ENGLISH 34 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL dEVICE SETUP To obtain the external control device setup information, please visit www.lg.com.
Page 36 - LG Customer Information Center; Register your product Online!
The model and serial numbers of the TV are located on the back and one side of the TV. Record them below should you ever need service. MODEL SERIAL This product qualifies for ENERGY STAR in the factory default (Home Use) setting. Changing the factory default settings or enabling other features may i...
Page 37 - OWNER’S MANUAL; EXTERNAL CONTROL
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com
Page 38 - KEY CODES
2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 45 Q.Menu R/C Button 01 CH -, PR - R/C Button 4C List, - (ATSC Only) R/C Button 02 Volume + R/C Button 53 List R/C Button 03 Volume - R/C B...
Page 39 - USB to Serial converter with USB Cable; USB Type; which is not made nor provided by LG.
3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: T...
Page 40 - Customer Computer
4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. USB IN (TV) (P...
Page 41 - Communication Parameters; Communication code : ASCII code; Command reference list; COMMAND1 COMMAND2
5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexade...
Page 42 - Transmission / Receiving Protocol; Transmission; : Space – ASCII code ‘0x20’; OK Acknowledgement; data of the PC computer.; Error Acknowledgement; viable functions or communication errors.; Real data mapping (Hexadecimal
6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose des...
Page 46 - For Plasma TV
10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite) Data 03: High byte Channel Data Data 0...
