Page 2 - CONTENTS; OPEN SOURCE SOFTWARE NOTICE
2 ENGLISH CONTENTS ON CLEANING .......................................3 LICENSE ...............................................4 OPEN SOURCE SOFTWARE NOTICE INFORMATION ......................................4 ASSEMBLY AND PREPARING ...................5 USER SETTINGS ....................................
Page 3 - WARNING; ON CLEANING; Recommended Cleaning Chemicals
3 ENGLISH Please note that this information is for proper use and safety of the equipment. The following symbols may indicate a hazardous situation in which, if not heeded, may result in serious injury or even death to the user or others, or damage to the equipment. WARNING • Indicates warning and s...
Page 4 - LICENSE
4 ENGLISH LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. "DICOM® is the r...
Page 5 - ASSEMBLY AND PREPARING; Product Composition
5 ENGLISH ASSEMBLY AND PREPARING Product Composition Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product.Note that the product and related components may look different fro...
Page 6 - CAUTION; NOTE; Supported Software
6 ENGLISH CAUTION • Always use genuine LG components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of unauthorized components. • It is recommended to use the supplied components. • If you use generic cables not certified by LG, the...
Page 7 - Product and LED Control buttons
7 ENGLISH Product and LED Control buttons Front 1 2 3 4 5 6 7 8 Bottom 9
Page 8 - LED Control button Functions
8 ENGLISH LED Control button Functions 1 • Selects the input mode. 2 • Adjusts display mode for 2 or more screens. 3 • Opens the [Hot key Settings] menu. 4 • Adjusts the screen brightness. 5 • Selects and confirms menus or options 6 • Adjusts the screen contrast. 7 • Displays LED Control buttons on ...
Page 9 - Connectors
Page 11 - Installing the Monitor; Cable connection and organize
11 ENGLISH Installing the Monitor Cable connection and organize Before connecting the connectors, remove the back door as shown below. 1 2 3 4 5 CAUTION • When the back door is attached to the monitor, the monitor meets water resistance standards. Do not use the monitor with the back door detached, ...
Page 12 - Installing on the Wall
12 ENGLISH Installing on the Wall Install the monitor at least 100 mm (3.9 inches) away from the wall on each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local dealer. Please refer to the manual to install and set up a tilting wa...
Page 14 - USER SETTINGS; Activating the Quick Menu
14 ENGLISH USER SETTINGS Activating the Quick Menu 1 Press ( ) to activate the LED Control Button. When the LED Control button is activated, press ( ) to show the OSD Quick Menu. 2 Among the LED Control Button, press to move to the left or right or to move to the bottom or top or to set options. 3 I...
Page 15 - Quick Settings
15 ENGLISH Quick Settings 1 Press ( ) to activate the LED Control Button. When the LED Control Button is activated, press ( ) and select [All Settings] to show the complete OSD Menu. 2 Among the LED Control Button, press to move to the left or right or to move to the bottom or top to go to the [Quic...
Page 17 - Input
17 ENGLISH Input 1 Press ( ) to activate the LED Control Button. When the LED Control Button is activated, press ( ) and select [All Settings] to show the complete OSD Menu. 2 Among the LED Control Button, press to move to the left or right or to move to the bottom or top to go to the [Input]. 3 Con...
Page 19 - Picture
19 ENGLISH Picture 1 Press ( ) to activate the LED Control Button. When the LED Control Button is activated, press ( ) and select [All Settings] to show the complete OSD Menu. 2 Among the LED Control Button, press to move to the left or right or to move to the bottom or top to go to the [Picture]. 3...
Page 24 - General
24 ENGLISH General 1 Press ( ) to activate the LED Control Button. When the LED Control Button is activated, press ( ) and select [All Settings] to show the complete OSD Menu. 2 Among the LED Control Button, press to move to the left or right or to move to the bottom or top to go to the [General]. 3...
Page 27 - TROUBLESHOOTING
27 ENGLISH TROUBLESHOOTING Nothing is displayed on the screen. Problem Action Is the monitor's power cord plugged in? • Check if the power cord is correctly plugged into the power outlet. Is the power indicator on? • Check the power cable connection and turn on the power switch. Is the power indicat...
Page 29 - PRODUCT SPECIFICATIONS
29 ENGLISH PRODUCT SPECIFICATIONS In order to improve the product, specifications may change without notice.The ~ symbol means alternating current, and the symbol means direct current. LCD Screen Type TFT (Thin Film Transistor)LCD (Liquid Crystal Display) Screen Pixel Pitch 0.18159 mm x 0.18159 mm R...
Page 32 - DisplayPort
32 ENGLISH Support Mode (Preset Mode - PC) DisplayPort Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1152 x 864 54.347 60.05 +/+ 1280 x 720 45 60 +/+ 1280 x 1024 63.981 60.02 +/+ 16...
Page 33 - HDMI
33 ENGLISH HDMI Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1152 x 864 54.347 60.05 +/+ 1280 x 720 45 60 +/+ 1280 x 1024 63.981 60.02 +/+ 1600 x 900 60 60 +/+ 1920 x 1080 67.5 60 ...
Page 35 - EXTERNAL CONTROLLER SETUP
35 ENGLISH Power indicator Mode LED Color On Mode Green NOTE • Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent lamp. The number of times the screen is refreshed per second is called vertical frequency, or refresh rate, and...
Page 36 - Communication Parameters; Command Reference List
36 ENGLISH Set ID Function This function allows you to assign a unique ID to the monitor to control it remotely from your PC.Please refer to the "Transmission/Reception Protocol". 1 Press the button. 2 Use the , , , buttons to select [General]. Then press the button. 3 Use the , , , buttons ...
Page 37 - Transmission/Reception Protocol
37 ENGLISH Command Command1 Command2 Data (Hexadecimal) 16. [DFC] m f 00 ~ 01 17. [Response Time] m g 00 ~ 03 18. [Black Stabilizer] m h 00 ~ 64 19. [Uniformity] m i 00 ~ 01 20. [Gamma] m j 04 ~ 09 21. [Color Temp] k u 00 ~ 04 22. [Red] j w 00 ~ 64 23. [Green] j y 00 ~ 64 24. [Blue] j z 00 ~ 64 25. ...
