Page 3 - ENG; ENGLISH; CONTENTS
2 ENG ENGLISH TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPAR- ING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 6 - Detaching the Stand Base 7 - Mounting on a table 7 - Using the cable holder 9 - Mounting on a wall 10 USING THE MONITOR SET 10 Connectin...
Page 4 - ASSEMBLING AND PREPARING; Unpacking; CAUTION
3 ENG ENGLISH ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessori...
Page 5 - Parts and buttons; Power Indicator
4 ENG ENGLISH ASSEMBLING AND PREPARING Parts and buttons Power Indicator y y Lighting On: Turned on y y Lighting Off: Turned off Connection panel (See p.10) Button (See p.12) (Power Button)
Page 6 - Setting up the Monitor set; Attaching the Stand Base; Stand Body
5 ENG ENGLISH ASSEMBLING AND PREPARING Attach the Stand Body to the monitor set. Use two screws to fix the Stand Body and monitor set.Attach the Stand Base . Tighten the screw to the right. Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a fla...
Page 7 - Detaching the Stand Base; Place the Monitor set with the screen side; Stand Base; from the; Remove two screws and pull out the; Stand; from the monitor set.
6 ENG ENGLISH ASSEMBLING AND PREPARING y y This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. y y Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. CAUTION D...
Page 8 - Mounting on a table; Cable holder; or
7 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table.Leave a 10 cm (minimum) space from the wall for proper ventilation. Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. 3 Press (Power) butt...
Page 9 - NOTE
8 ENG ENGLISH ASSEMBLING AND PREPARING Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensing...
Page 10 - Mounting on a wall
9 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation andSetup Guide. If you intend to mount the Monit...
Page 11 - USING THE MONITOR SET; Connecting to a PC; device that users connect to a PC and turn; Mac adapter; For Apple Macintosh use, a separate plug; HDMI connection
10 ENG ENGLISH USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC y y Your Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits ana...
Page 12 - Self Image Setting
11 ENG ENGLISH USING THE MONITOR SET y y When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/HDMI) respectively in Monitor set. y y If you turn the Monitor set on while it is cold, the screen may flicker. This is normal. y y Some red, green, or blue spots may appear on ...
Page 13 - CUSTOMIZING SETTINGS; Press the desired button on the bottom of the Monitor set.; EXIT; to leave the OSD menu.; Monitor set Buttons
12 ENG ENGLISH CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Sele...
Page 14 - Customizing Settings; Menu Settings; MENU
13 ENG ENGLISH CUSTOMIZING SETTINGS Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the " Next Menu " button to enter the more option settings. 4 Select EXIT to le...
Page 15 - Picture
14 ENG ENGLISH CUSTOMIZING SETTINGS Picture 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Enter to Picture by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons. 5...
Page 16 - Color
15 ENG ENGLISH CUSTOMIZING SETTINGS Color 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Color by pressing the ► button. 4 Enter to Color by pressing the ▼ button. 5 Set the options b...
Page 17 - Display
16 ENG ENGLISH CUSTOMIZING SETTINGS Display 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Display by pressing the ► button. 4 Enter to Display by pressing the ▼ button. 5 Set the opt...
Page 18 - Others
17 ENG ENGLISH CUSTOMIZING SETTINGS Others 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Others by pressing the ► button. 4 Enter to Others by pressing the ▼ button. 5 Set the option...
Page 19 - READER Setting; Press; READER; button on the bottom of the Monitor; Set the options by pressssing the ◄ buttons.; Each option is explained below.
18 ENG ENGLISH CUSTOMIZING SETTINGS READER Setting 1 Press READER button on the bottom of the Monitor set to display the Reader Mode OSD. 2 Set the options by pressssing the ◄ buttons. Reader Mode Description Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you wan...
Page 20 - SUPER ENERGY SAVING; TOTAL POWER REDUCTION
19 ENG ENGLISH CUSTOMIZING SETTINGS SUPER ENERGY SAVING 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Enter to SUPER ENERGY SAVING by pressing the ▼ button. 3 Set the options by pressing the ◄ or ► or ▼buttons. 4 Select EXIT to leave the OSD menu.To return to the ...
Page 21 - Picture Mode
20 ENG ENGLISH CUSTOMIZING SETTINGS Picture Mode 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select Picture Mode by pressing the ► button. 3 Enter to Picture Mode by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT to leave ...
Page 23 - DUAL WEB
22 ENG ENGLISH CUSTOMIZING SETTINGS NOTE y y When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD appear and user should press dual button -> User can bring back to normal mode. DUAL DISPLAY 1 Press FUNC. button on the bottom of the Monitor set to displa...
Page 24 - TROUBLESHOOTING; Check the following before calling for service.; AUTO
23 ENG ENGLISH TROUBLESHOOTING TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? y Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? y Press the Power button. Is the p...
Page 25 - Control Panel; Control Panel ► Display ► Settings
24 ENG ENGLISH TROUBLESHOOTING Display image is incorrect The screen color is mono or abnormal. y Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. y Make sure the video card is properly inserted in the slot. y Set the color setting higher than 24 bits (tr...
Page 26 - Separate Sync. Digital; SPECIFICATIONS
25 ENG ENGLISH SPECIFICATIONS Display Screen Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 68.5 cm visible diagonal (27 inch) Pixel Pitch 0.311 mm x 0.311 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to ...
Page 27 - HDMI Timing
26 ENG ENGLISH SPECIFICATIONS Preset Modes (Resolution) D-SUB Timing Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 ...
Page 28 - Proper posture for using the Monitor set.; PROPER POSTURE
27 ENG ENGLISH PROPER POSTURE Proper posture for using the Monitor set. PROPER POSTURE Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the...
Page 29 - Declaration of Conformity
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL *above inform...
