Page 2 - SAFETY INSTRUCTIONS; FCC NOTE; PRECAUTIONS
IB-HT400-WM-E-122502 1 SAFETY INSTRUCTIONS CAUTION F C C R e g u l a t i o n s s t a t e t h a t u n a u t h o r i z e d changes or modifications to this equipment may void the users authority to operate it. FCC NOTE This equipment has been tested and found to comply with the limits for a Class B d...
Page 3 - INTRODUCTION; Basic Features & Benefits of this Digital Home Theater System:; THIS SYSTEM CONTAINS
IB-HT400-WM-E-122502 INTRODUCTION All of the adjustable system settings have been preset at our factory for normal operation of the system. All you have to do is tosit back and enjoy the great home theater experience.Later on, you may want to change some of the optional settings like speaker volume ...
Page 4 - • Listening Mode; Trouble Shooting; TABLE OF CONTENTS
IB-HT400-WM-E-122502 Getting Started Safety Instructions------------------------------------------------------------------------------------------------------------------------------------- 1Introduction-----------------------------------------------------------------------------------------------...
Page 5 - LOCATION OF CONTROLS; FRONT PANEL
IB-HT400-WM-E-122502 1. MAIN POWER button - Press to switch the set on or off. NOTE: This button must be on in order to be able to use the REMOTE control. 2. STANDBY indicator - This indicator has 2 colors: red and green (red is standby, green is on). When the set is off (standby), pressing the SOUR...
Page 6 - REMOTE CONTROL
IB-HT400-WM-E-122502 H T -4 0 0 1. POWER button - Switches the player from STANDBY to ON or ON to STANDBY (if the main POWER of the set is ON). 2. MUTE button - Instantly turns off the sound. Press again to restore the sound. 3. MASTER VOLUME UP button - Press to raise the volume level of all speake...
Page 7 - REMOTE CONTROL OPERATION
IB-HT400-WM-E-122502 REMOTE CONTROL OPERATION Remove the BATTERY COMPARTMENT DOOR of the REMOTE CONTROL and insert 2 size AAA alkaline batteries (included) according to the and markings inside the BATTERY COMPARTMENT of the REMOTE CONTROL unit. Tips on Battery Use Battery Installation Remote Contr...
Page 8 - Choose Your Connection; COMPONENTS; Cables Needed to Connect Components to Your Home Theater System; CONNECTIONS
IB-HT400-WM-E-122502 Choose Your Connection Th e r e a r e s e v e r a l w a y s t o c o n n e c t y o u r H o m e T h e a t e r S y s t e m . P l e a s e u s e t h e f o l l o w i n g c h a r t t o d e t e r m i n e w h i c hconnection is the best for you. Turn to the appropriate page and connect y...
Page 9 - SPEAKER SYSTEM CONNECTIONS; Speaker System Connections
IB-HT400-WM-E-122502 SPEAKER SYSTEM CONNECTIONS Speaker System Connections The speaker wires and connectors are color coded for easierset up. Connect the Front Left speaker to the Front Left terminals. Connect the Front Right speaker to the Front Right terminals. Connect the Center speaker to ...
Page 10 - To avoid short-circuiting the speakers; Examples of poor connection of the
IB-HT400-WM-E-122502 SPEAKER SYSTEM CONNECTIONS To avoid short-circuiting the speakers Make sure the stripped end of each speaker wire does not t o u c h a n o t h e r s p e a k e r t e r m i n a l o r t h e s t r i p p e d e n d o f another speaker wire. NOTE: Be sure to match the speaker wire to...
Page 11 - SPEAKER POSITIONING INFORMATION
IB-HT400-WM-E-122502 10 Your system is supplied with 4 compact sized satellite speakers, oneslightly larger center speaker and one large subwoofer. The satellitespeakers and the center speaker reproduce only the mid range andhigher frequencies. All of the low frequency (bass) sounds areproduced by t...
Page 12 - SATELLITE SPEAKERS
IB-HT400-WM-E-122502 SPEAKER POSITIONING INFORMATION • The center speaker, as well as the other 4 satellite speakers,can be positioned either vertically or horizontally. • The left front, right front, and center speakers should beplaced at roughly the same height. The center speakerreproduces most o...
Page 13 - TV CONNECTIONS; Y O U R T V S E T; HOME THEATER; Home Theater System + TV
IB-HT400-WM-E-122502 12 1. Connect the 5 satellite speakers and subwoofer as shown on Page 8 (or the QUICK SETUP DIAGRAM packed with the set). 2. Insert the stereo audio cables (included) into the TV / VCR AUDIO INPUT L (left=white) and R (right=red) jacks on the back of your HOME THEATER SYSTEM, an...
Page 15 - YOUR VCR
IB-HT400-WM-E-122502 1. Insert the stereo audio cables (included) into the TV/VCR AUDIO INPUT L (left=white) and R (right=red) jacks on the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your VCR, this will allow your VCRs sound to play through your HOME THEATER SYS...
Page 16 - TV + VCR + SATELLITE RECEIVER CONNECTIONS
IB-HT400-WM-E-122502 R L 15 Home Theater System + TV + VCR + Satellite TV + VCR + SATELLITE RECEIVER CONNECTIONS 1. Follow the above connection diagram and check if you have these items. If your VCR has AUDIO OUT jacks, you may connect your VCR to your HOME THEATER as shown. NOTE : Your VCRs sound ...
Page 17 - TV + TV GAME CONNECTIONS; YOUR TV GAME
IB-HT400-WM-E-122502 TV + TV GAME CONNECTIONS Home Theater System + TV + TV Game 16 BACK OF HT-400 HOME THEATER YOUR TV SET FRONT OF HT-400 HOME THEATER YOUR TV GAME NOTE: Your TV GAME may have a special cable for connections. T h i s d i a g r a m i s o n l y f o r illustration. NOTE: On some TVs, ...
Page 18 - TV + VIDEO CAMERA CONNECTIONS
IB-HT400-WM-E-122502 1. Insert the stereo audio cables into the AUDIO INPUT L (left=white) and R (right=red) jacks on the FRONT of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your VIDEO CAMERA, this will allow your CAMERA VIDEOs sound to play through your HOME THEATER SY...
Page 19 - AUX IN CONNECTIONS
IB-HT400-WM-E-042503 AUX IN CONNECTIONS 1. Insert the audio cables into the AUX OUTPUT L (left=white) and R (right=red) jacks of your stereo system, such as a TAPE RECORDER/PLAYER, CD PLAYER into the corresponding AUX INPUT AUDIO jacks on your HOMETHEATER. This will enable you to hear your component...
Page 20 - AM / FM TUNER CONNECTIONS
IB-HT400-WM-E-122502 AM / FM TUNER CONNECTIONS 1. Insert the audio cables into the AUX OUTPUT L (left=white) and R (right=red) jacks on the back of your AM/FM TUNER, and into the corresponding TUNER INPUT AUDIO jacks on the back of your HOME THEATER. This will enable you to hear your stereo AM/FM TU...
Page 21 - AMPLIFIER
IB-HT400-WM-E-122502 H T -4 0 0 20 AMPLIFIER General 1 Press the POWER button on the front panel of the main unit to turn the main power on, press SOURCE or MASTER VOLUME buttons on the main unit, or any button on the REMOTE control to turn the set on. Make sure theSTANDBY indicator is lit in green....
Page 22 - Test Tones
IB-HT400-WM-E-122502 H T -4 0 0 21 AMPLIFIER Test Tones You can check whether your speakers are connected correctly by using the TEST TONE button. 1 Press the POWER button on the front panel of the main unit to turn the main power on, press SOURCE or MASTER VOLUME buttons on the main unit,or any but...
Page 23 - Volume Adjustment
IB-HT400-WM-E-122502 H T -4 0 0 22 AMPLIFIER Volume Adjustment 1 To adjust the master volume (Change all the speakers volume settings at the same time), press the MASTER VOLUME buttons on the main unit or on the REMOTE to decrease or increase the master volume level. The VOLUME indicator on the fro...
Page 24 - LISTENING MODE; Listening with Stereo Headphones
IB-HT400-WM-E-122502 23 LISTENING MODE Dolby Digital (AC-3) Mode Dolby Digital (also known as AC-3 or Dolby 5.1) surround sound system delivers a realistic and dynamic sound similar to the latest movie theaters. All five speakers and subwoofer must be connected for correct Dolby Digital Surround Sou...
Page 25 - Dolby Pro Logic and Stereo Modes
IB-HT400-WM-E-122502 24 LISTENING MODE Dolby Pro Logic and Stereo Modes The Dolby Pro Logic surround system is a specially encoded two-channelanalog format that will produce sound through four speaker channels (frontleft, center, front right, mono surround). This is also compatible with stereosystem...
Page 26 - TROUBLE SHOOTING; Symptom
IB-HT400-WM-E-122502 TROUBLE SHOOTING Symptom Remedy No power 1. Is the power cord firmly plugged into the power outlet? Insert the AC power plug securely into the power outlet. Make sure your outlet has power, you can check this by plugging a lamp into the outlet to see if works. 2. One of the safe...
Page 27 - SPECIFICATIONS; For customer service of this Durabrand product
IB-HT400-WM-E-122502 General SPECIFICATIONS LENOXX reserves the right to make design and specification changes for product improvement. PROTECT YOUR FINE FURNITURE! WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING IT ON A SURFACE WITH A NATURAL OR LACQUER FINISH...
