Page 2 - Important Safety Information; Safety and Warranty Guide
Important Safety Information Before using this manual, it is important that you read and understand all of the related safety information for this product. Refer to the Safety and Warranty Guide that you received with this product for the latest safety information. Reading and understanding this saf...
Page 4 - Contents; Wireless keyboard and mouse
1 Contents Contents Important Safety Information Chapter 1 Using the Computer Hardware .............................. 1 1.1 Front view ................................................................................2 1.2 Left and right view of the computer .........................................3 ...
Page 5 - Troubleshooting Problems with Optical Drives and
2 Contents Chapter 5 Troubleshooting and Confirming Setup .............. 37 5.1 Troubleshooting Display Problems .........................................38 5.2 Troubleshooting Audio Problems ...........................................39 5.3 Troubleshooting Software Problems............................
Page 6 - Chapter; Computer hardware introduction; Using the Computer Hardware
1 2 3 4 5 Chapter This chapter contains the following topics: Ø Computer hardware introduction Ø Information on computer connections Note: The descriptions in this chapter might vary from your computer, depending on computer models and configurations. User Guide 1 Using the Computer Hardware 3104883...
Page 8 - Left and right view of the computer; Be sure not to block any air vents on the computer. Blocked
3 User Guide 1.2 Left and right view of the computer Attention: Be sure not to block any air vents on the computer. Blocked air vents may cause thermal problems. Optical driveRefer to Quick Reference for detail instruction of hardware TV buttons Card readerUSB portHeadphone portMicrophone portUSB po...
Page 9 - Rear view of the computer
4 User Guide 1.3 Rear view of the computer Ethernet portTV tuner port (Selected models only)USB ports (5)Bluetooth reset button (Only some models are functional)AV-IN portsPS/2 keyboard portPower connector 31048832 IdeaCentre B3 UG V2.0 (EN)(R).indd 4 2010-12-24 10:10:39
Page 10 - The computer stand must remain installed at all times to ensure
5 User Guide 1.4 Computer stand Use the stand to position the display to your preference. It can be rotated between 15º and 40º from the vertical. The stand provides stability to the computer; it is not a removable part. Attention: 1. The computer stand must remain installed at all times to ensure m...
Page 11 - To open the computer stand, do the following:
6 User Guide To open the computer stand, do the following: The computer can be mounted on the wall. To mount the computer on the wall, you need to install a UL listed standard VESA wall mount (purchased separately) to make the computer mounted on the wall. Refer to Hardware Replacement Guide (HRG) f...
Page 12 - Connecting your computer; connectors to the icons.; Check the voltage rating before you connect the
7 User Guide 1.5 Connecting your computer Use the following information to connect your computer:• Look for the small connector icons on the back of your computer. Match the connectors to the icons. Note: Your computer might not have all of the connectors that are described in this section. 1.5.1 Ch...
Page 13 - following instructions:; Microphone; computer might not have all connectors shown.; USB connector
8 User Guide 1.5.4 If you have audio devices, attach them using the following instructions: 1 2 3 4 TV IN Microphone Use this connector to attach a microphone (purchased separately) to your computer when you want to record sound or if you use speech-recognition software. Headphone Use this connector...
Page 14 - Connect the power cords properly to grounded electrical
9 User Guide 1.5.6 Connect the power cords properly to grounded electrical outlets. 1.5.7 Your computer is equipped with a Memory Card Reader Connector, it is able to read/write data from: MS/MS Pro/MMC/SD/SDHC 31048832 IdeaCentre B3 UG V2.0 (EN)(R).indd 9 2010-12-24 10:10:41
Page 15 - Important information about using the computer; Hold the computer tightly when you carry it.
10 User Guide 1.6 Important information about using the computer Press the power button on the bottom left of the screen to turn on the computer. Hold the computer tightly when you carry it. 31048832 IdeaCentre B3 UG V2.0 (EN)(R).indd 10 2010-12-24 10:10:42
Page 16 - LVT
11 User Guide 1.7 Wired keyboard (Selected models only) LV T LV T LVT —— After entering Windows, press this key to launch the LVT (Lenovo Vantage Technology) program, Lenovo’s pre-loaded Home PC software. In addition to its own functions, the LVT program will allow you to start other Windows compati...
Page 17 - Refer to the
12 User Guide 1.8 Wireless keyboard and mouse (Selected models only) Refer to the Wireless keyboard and mouse instruction for more information about the bluetooth connection. LVT LVT —— After entering Windows, press this key to launch the LVT (Lenovo Vantage Technology) program, Lenovo’s pre-loaded ...
Page 18 - Wireless keyboard and mouse instructions; The wireless keyboard and mouse are pre-synchronized, for your
13 User Guide Wireless keyboard and mouse instructions Note: The wireless keyboard and mouse are pre-synchronized, for your convenience, to work with your Lenovo PC. The keyboard and mouse should work immediately after you install the batteries, and then turn on the mouse and keyboard. Step 1. Insta...
Page 19 - Step 1. Press the Bluetooth connect button.
14 User Guide If you do not plan to use the mouse for a long time, turn off the mouse power switch to save battery life. Turn on the mouse power switch. You may need to manually synchronize the wireless keyboard or mouse if they are not functioning. To synchronize them, do the following: Step 1. Pre...
Page 20 - If connection is not established successfully, refer to “Wireless; If the wireless device does not work, do the following:
15 User Guide Step 2. Make sure the indicator lights blink and press the Bluetooth reset button. When the keyboard and mouse Bluetooth indicator lights blink white, press the Bluetooth reset button on the back of the computer for over 6 seconds until the indicator lights of the keyboard and mouse tu...
Page 21 - not plan to use them for a long time.
16 User Guide 7. Place the keyboard, mouse and remote control the right way up. 8. Remove the batteries from the keyboard, mouse and remote control if you do not plan to use them for a long time. 9. If the batteries in the keyboard, mouse or remote control leak, clean the battery compartments as soo...
Page 22 - Touch screen user instruction; Touch Screen Calibration
1 2 3 4 5 Chapter Touch screen user instruction User Guide 17 This chapter contains the following topics: Ø Touch Screen Calibration Ø User Gesture Instructions for the Touch screen Ø Attentions when using the Touch Screen Attention: Only some selected models are equipped with touch screens. 3104883...
Page 23 - Touch Screen Calibration
18 User Guide The monitor has touch capability due to a touch-sensitive screen installed. A touch screen is an input device just like a mouse or a keyboard, and the user’s hand transmits position information via the touch screen to the computer. With this technology, you only need to touch the pictu...
Page 24 - User Gesture Instructions for the Touch screen; Do not touch it via hard objects like finger nails.
19 User Guide 2.2 User Gesture Instructions for the Touch screen The Touch screen supports single touches and rotational movements, enlargement and reduction multi-touch operations, and the user can transmit position information to the computer via touch. The touch screen uses a very low pressure mo...
Page 27 - “Forward”
22 User Guide 5. High Speed SlideIf you touch the screen with a single finger and slide it a short distance horizontally (about 5 cm), then quickly lift it up again, this is called a High Speed Slide, and the screen will show the “Forward” or “Back” icon. In the default situation, a high speed horiz...
Page 30 - Customize your flicks setting
25 User Guide 2. For more detailed configuration, you can click on the Flicks icon in the notification area of the taskbar at the bottom of the screen, then click on “ Customize your flicks setting ” in the Flicks pop-up window. In the “ Pen and Touch ” window, the user can adjust more settings rela...
Page 31 - ” and
26 User Guide On the Touch menu you can:• Enable / disable options such as “ Use your finger as an input device ” and “ Enable multi-touch gestures and inking ”. • Select touch actions which you wish to adjust. By clicking on “ Settings ”, you can adjust the “ Speed ” and “ Spatial tolerance ” param...
Page 32 - Attentions when using the Touch Screen; clean and dry, and ensure that your fingers are clean and dry.
27 User Guide 2.3 Attentions when using the Touch Screen 1. When using it please remember not to tear the screen surface with any sharp object. 2. In order not to affect the normal use of the touch screen, please keep its surface clean and dry, and ensure that your fingers are clean and dry. 3. In o...
Page 33 - manual and also the related Windows help content.
28 User Guide 7. The recognition of touch gestures by this product can be influenced by the following factors:• Touching the correct place on the screen.• The speed of movement.• The time interval from when the screen was last touched. Note: To learn accurate hand gesture operations, the user can co...
Page 34 - Using the Rescue System
1 2 3 4 5 Chapter Using the Rescue System This chapter contains the following topics: Ø OneKey Recovery Ø Driver and Application Installation Ø System Setup Ø System Backup Ø System Recovery Ø Create Recovery Disc Attention: Using this program will result in a loss of data. • You can recover the C d...
Page 35 - Note about the service partition:; The recovery files and relevant data used by the rescue system are; Detailed Operation Procedure; Driver and Application Installation
30 User Guide Note about the service partition: The files and relevant data used by the rescue system are saved in the service partition. Deleting this partition will make the rescue system unusable. For more detailed information, see the following instructions: By selecting Control Panel → Administ...
Page 36 - Method 1: Automatic Installation
31 User Guide Method 1: Automatic Installation Repeatedly press and release the F2 key once turning on the computer until the Lenovo Rescue System open, then select Drivers and Application Installation . Follow the screen prompts to install the Lenovo Drivers and Application Installation. Click Inst...
Page 37 - Create Recovery Disc
32 User Guide 2. If you select “LAN connection,” configure the IP address and proxy server of the LAN. 3.3.3 Password Management Password Management allows you to set the password for Lenovo Rescue System and manage it. The default password is blank. Set a password when you access the Password Manag...
Page 38 - Using the Computer Software; Computer software instructions
1 2 3 4 5 Chapter Using the Computer Software This chapter contains the following topics: Ø Computer software instructions Note: The interface and function of each of these features are subject to the actual software that was shipped with the computer model that you purchased. User Guide 33 31048832...
Page 39 - Lenovo Dynamic Brightness system; Before using this software, do the following:; from the pop-up window to display the image in the
34 User Guide 4.1 Lenovo Dynamic Brightness system Lenovo Dynamic Brightness System can automatically detect the surrounding ambient brightness and will adjust display brightness accordingly. You can set the screen brightness to a comfortable level for different environments. You can also set the di...
Page 40 - ” device, and the window should display the; Lenovo Eye Distance System; This function applies only to the computer equipped with a Lenovo
35 User Guide 3) Confirm that Devices → Lenovo USB2.0 UVC Camera has been checked. If there are other devices in this option, do not check them. Only choose the “ Lenovo USB2.0 UVC Camera ” device, and the window should display the camera image. An image, which is caught by Lenovo PC camera, will be...
Page 41 - The limitation of the distance detection by the camera:
36 User Guide The default setting has been pre-selected. You can adjust the viewing distance according to your needs. Notes: 1. Ensure the lens of the camera is exposed and not covered.2. Ensure your eyes are exposed and not covered. (The function that detects the distance between the user and monit...
Page 42 - Troubleshooting and Problem Resolution
1 2 3 4 5 Chapter Troubleshooting and Confirming Setup This chapter contains the following topics: Ø Troubleshooting and Problem Resolution Note: The description of the TV-Tuner card in this manual is only used for the machines which have the TV-Tuner card. It does not apply to those machines that d...
Page 43 - Solving Problems; message may help support personnel diagnose and fix the problem(s).; Troubleshooting Display Problems; Blank screen or no image is displayed on the monitor.
38 User Guide Solving Problems Follow these tips when you troubleshoot your computer:• If you added or removed a part before the problem started, review the installation procedures and ensure that the part is correctly installed. • If a peripheral device does not work, ensure that the device is prop...
Page 44 - Troubleshooting Audio Problems; No sound from integrated speakers.; Troubleshooting Software Problems; You are unable exit a running program normally.
39 User Guide 2. Move any interfering devices away from the computer.3. If the problem persists, consult with Lenovo Service. 5.2 Troubleshooting Audio Problems Problem: No sound from integrated speakers. Troubleshooting and problem resolution: • Adjust the windows volume control — Double-click the ...
Page 45 - During installation; Troubleshooting Problems with Optical Drives and; Troubleshooting and problem resolution:
40 User Guide Problem: You need to install or uninstall a program. Problem resolution: During installation never abort the install process by powering the system off or through other drastic means. This can cause system program disorder or evenfailure during system initialization. During the uninsta...
Page 46 - the nominal capacity.; Special considerations for troubleshooting Windows; a. When you change your TV signal from digital to analog, your saved
41 User Guide Problem: The capacity of the hard disk, as indicated by the system, is less than the nominal capacity. Troubleshooting and problem resolution: For computers equipped with the OneKey Recovery feature, the system recovery feature needs to occupy some hard disk space. This may account for...
Page 47 - Performing Daily Maintenance Tasks; Cleaning the computer components
42 User Guide • Before you can watch teletext programming, you must set the TV tuner input signal to analog. 5.6 Performing Daily Maintenance Tasks Cleaning the computer components Because many of the computer components consist of sophisticated integrated circuit boards, it is very important to per...
Page 48 - Wireless Keyboard and Mouse Connection; Status
43 User Guide 5.7 Wireless Keyboard and Mouse Connection Instructions and Troubleshooting 1. What is wireless connection? Wireless connection is a Bluetooth pairing process. It connects the wireless keyboard and mouse to the computer so that you can use them normally. 2. When do I need to use the wi...
Page 49 - This process could take several minutes.
44 User Guide 4. How can I tell if the wireless connection has been established successfully? a. Check if the devices work: See if you can use the wireless keyboard and mouse normally. b. Check the indicator lights: Refer to section “C” of the “Indicator light guide”. 5. Wireless keyboard and mouse ...
Page 50 - If the wireless indicator lights stop blinking, press the connect; Troubleshooting wireless mouse and keyboard
45 User Guide Method 3: (Using the operating system) Notes: • Prepare a wired keyboard and mouse before using this method.• Follow the steps below to install a new wireless keyboard and mouse. 1. Use a wired keyboard and mouse to start the operating system.2. Turn on the power switches of the wirele...
Page 51 - instructions” section in the
46 User Guide instructions” section in the User Guide . 4. Restart the computer. a. Turn off the computer and unplug the main power cord.b. Plug the main power cord in and restart the computer.c. Repair the devices as explained in the “Wireless keyboard and mouse instructions” section in the User Gu...
Page 52 - see if performance improves.
47 User Guide 3. Turn the mouse over and check the sensor window. If there is any dust or debris, clean the sensor window gently. 4. If multiple Bluetooth wireless devices are in use nearby, try turning them off to see if performance improves. 31048832 IdeaCentre B3 UG V2.0 (EN)(R).indd 47 2010-12-2...
