Page 2 - Important Safety Information
Important Safety Information Before using this manual, it is important that you read and understand all of the related safety information for this product. Refer to the Safety and Warranty Guide that you received with this product for the latest safety information. Reading and understanding this saf...
Page 4 - Contents
i Contents Contents Important Safety Information Using the Computer Hardware ................................................. 1 Front view of the computer .........................................................................2 Left and right views of the computer ...................................
Page 6 - Using the Computer Hardware
This chapter contains the following topics: Introduction to the computer hardware Information on computer connections Note: The descriptions in this chapter might be different from what you see on your computer, depending on the computer model and configuration. User Guide 1 Using the Computer H...
Page 7 - Front view of the computer
2 User Guide Front view of the computer Attention: Be careful not to block any air vents on the computer. Blocked air vents can cause overheating. 1 2 7 6 5 4 8 9 10 3 Built-in microphone Camera LED indicator Built-in camera Built-in microphone (selected models only) Hard disk drive indicator Wi-Fi ...
Page 8 - Left and right views of the computer
3 User Guide Left and right views of the computer Attention: Be sure not to block any air vents on the computer. Blocked air vents may cause thermal problems. 1 4 2 6 7 5 3 USB 3.0 connector Headphone connector Microphone connector USB 2.0 connector Memory card reader Optical drive eject button Powe...
Page 9 - Rear view of the computer
4 User Guide Rear view of the computer 1 2 5 6 4 3 6 TV tuner connector (selected models only) Power connector Ethernet connector HDMI connector (selected models only) USB 2.0 connectors (2) Air vents
Page 10 - Installing the computer stand
5 User Guide Installing the computer stand Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the screen from scratches or other damage. 1. Raise the stand holder. 2. Line ...
Page 11 - Computer stand
6 User Guide 4. Press down the hand screw rings and rubber caps. Computer stand Use the stand to position the display to your preference. It can be rotated 5° forward and 25° backward.
Page 12 - Basic connector instructions
7 User Guide Basic connector instructions Note: Your computer may not have all of the connectors described in this section. Connector Description Microphone Use this connector to attach a microphone to your computer when you want to record sound or if you use speech-recognition software. Headphone U...
Page 13 - Connecting your computer; Connecting the power cord
8 User Guide Connecting your computer Connecting the power cord Connect the power cord to an electrical outlet. We recommend using a grounded connection or a surge protector. Important information about using the computer Press the power button on the side of the computer to turn on the computer.
Page 14 - Connecting to the Internet
9 User Guide Hold the computer tightly when you carry it. Connecting to the Internet To connect to the Internet, you’ll need a contract with an Internet Service Provider (ISP) and some hardware.IPSs and ISP offerings vary by country. Contact your ISP for offerings available in your country.Your comp...
Page 17 - The Charms Bar
12 User Guide Switching between the main Windows 8.1 interfaces Windows 8.1 comes with two main user interfaces: the Start Screen and the Windows desktop.To switch from the Start Screen to the Windows desktop, do one of the following:• Select the Windows desktop tile on the Start Screen.• Press the ...
Page 18 - Switching between apps; Opening other system programs
13 User Guide Switching between apps Sometimes you want to get back to an app you were just using, or quickly switch through your recent apps.To switch between apps:Move the cursor to the top left corner, then click to bring in the next app. (If your computer is equipped with touch screen, swipe in ...
Page 20 - Touch screen instructions
Touch screen instructions User Guide 15 This chapter contains the following topics: Touch Screen Calibration User Gesture Instructions for the Touch screen Attentions when using the Touch Screen Attention: Only selected models are equipped with a touch screen.
Page 22 - Basic Hand Gestures
17 User Guide Basic Hand Gestures 1. Single Click / Double Click For the item selected on the touch screen, with one finger touch it one or two times, to perform a single click or double click operation. This is similar to the action performed by clicking the mouse left button. 2. Single Finger Righ...
Page 25 - Related Touch Screen Settings
20 User Guide Related Touch Screen Settings • Select Hardware and Sound → Pen and Touch from the Settings charm. • Select touch actions which you wish to adjust. By clicking on “ Settings ”, you can adjust the “ Speed ” and “ Spatial tolerance ” parameters, to match the user’s natural way of double-...
Page 26 - Precautions when using the Touch Screen
21 User Guide Precautions when using the Touch Screen 1. When using the touch screen, be careful not to tear the surface with any sharp objects. 2. To ensure normal use of the touch screen, ensure that both the screen surface and your fingers are clean and dry. 3. To ensure precise positioning on th...
Page 28 - Using the Rescue System
Using the Rescue System This chapter contains the following topics: OneKey Recovery Driver and Application Installation Attention: Using OneKey Recovery will result in loss of data. • You can restore the C: drive of the computer to factory default settings or to the last system backup status usi...
Page 29 - Note about the service partition:
24 User Guide Note about the service partition: The files and relevant data used by the rescue system are saved in the service partition. Deleting this partition will make the rescue system unusable. For more detailed information, see the following instructions: From the Search charm, select Apps → ...
Page 30 - Driver and Application Installation; Method 1: Automatic Installation
25 User Guide Driver and Application Installation The Driver and Application Installation function in the rescue system provides a way for the user to conveniently reinstall all of the Lenovo applications and drivers that were shipped with your Lenovo hardware. Method 1: Automatic Installation Repea...
Page 32 - Using the Software
Using the Software This chapter contains the following topic: Software instructions Note: The interface and functionality of these features will depend on which software was shipped with the computer model you purchased. User Guide 27
Page 33 - Lenovo Support; Registration; Service and Warranty
28 User Guide Lenovo Support The Lenovo Support program enables you to register your computer with Lenovo, download and view user manuals for your computer, get the warranty information of your computer, and explore help and support information. To open this program, do the following: Click the Leno...
Page 35 - Solving Problems; Troubleshooting Display Problems
30 User Guide Solving Problems Follow these tips when troubleshooting your computer: • If you added or removed a part before the problem started, review the installation procedures to ensure that the part is correctly installed. • If a peripheral device does not work, ensure that the device is prope...
Page 36 - Troubleshooting Touch screen; Troubleshooting Audio Problems
31 User Guide Problem: Ripple on screen. Troubleshooting and problem resolution: 1. Check to see if any of the following devices are located less than one meter from the computer: refrigerators, electric fans, electric dryers, UPS systems, regulators, fluorescent lamps or other computers that may be...
Page 37 - Troubleshooting Software Problems
32 User Guide Problem: No sound from headphones. Troubleshooting and problem resolution: • Check the headphone cable connection — ensure that the headphone cable is securely inserted into the headphone connector. • Adjust the Windows volume control — select the speaker icon from the Settings Charm o...
Page 39 - Windows Help and Support
34 User Guide The capacity of the hard disk as calculated using this method may be slightly different from the actual capacity due to the rounding of totals. Special considerations for troubleshooting Windows Record the following information as it may be useful later when troubleshooting system prob...
Page 40 - Performing Daily Maintenance Tasks
35 User Guide When do I need to change the boot mode? The default boot mode for your computer is the UEFI mode. If you need to install a legacy Windows operating system (any operating system before Windows 8.1) on your computer, you must change the boot mode to Legacy support. The legacy Windows ope...
Page 42 - Hardware Replacement Guide
Hardware Replacement Guide This chapter contains the following topics: Removing the stand base Removing the foot cover Replacing the memory module Replacing the hard disk drive Replacing the optical drive Replacing the adapter Replacing the keyboard and mouse User Guide 37
Page 43 - Overview; Safety information for replacing CRUs
38 User Guide Overview This guide is intended to be used by customers who are replacing Customer Replaceable Units (CRUs) as well as trained service personnel who are replacing Field Replaceable Units (FRUs). In this guide, CRUs and FRUs will often be referred to as parts. Note: Trained service pers...
Page 44 - Additional information resources
39 User Guide Additional information resources If you have Internet access, the most up-to-date information for your computer is available from the Internet. You can find the following information:• CRU removal and installation information• Publications• Troubleshooting information• Parts informatio...
Page 45 - Handling static-sensitive devices
40 User Guide Handling static-sensitive devices Static electricity, although harmless to you, can seriously damage computer components.When you are replacing a part, do not open the anti-static package containing the new part until the defective part has been removed from the computer and you are re...
Page 46 - Replacing hardware; General information; Pre-disassembly instructions; Removing the stand base
41 User Guide Replacing hardware Attention: Do not remove the computer cover or attempt any repairs before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies o...
Page 47 - Removing the foot cover
42 User Guide 4. To release the stand base from the stand holder, turn the hand screw rings counter-clockwise until the base comes loose. 5. Slide the stand base out from the holder then put it aside. 1 2 3 6. Refer to “Installing the computer stand” to reinstall the stand base. Removing the foot co...
Page 48 - Replacing the memory module
43 User Guide 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to “Left and right views” and “Rear view” for help with locating the various connectors. 4. Remove the foot base. Refe...
Page 50 - Replacing the hard disk drive
45 User Guide Replacing the hard disk drive Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or o...
Page 52 - Replacing the optical drive
47 User Guide Replacing the optical drive Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or oth...
Page 55 - Replacing the adapter
50 User Guide Replacing the adapter Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. 2. Discon...
Page 56 - Replacing the keyboard and mouse; To replace the keyboard:
51 User Guide Replacing the keyboard and mouse Note: Your keyboard will be connected to a USB connector at either side or at the rear of the computer. To replace the keyboard: 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the computer, and turn off all attached devices...
Page 58 - Declaration
53 User Guide Appendix. Declaration Thank you for using Lenovo products.Carefully read all documents shipped with your computer before you install and use the product for the first time. Lenovo is not responsible for any loss except when caused by installation and operations performed by Lenovo prof...
Page 59 - Trademarks
54 User Guide Trademarks Lenovo and the Lenovo logo, IdeaCentre and IdeaCentre logo are trademarks of Lenovo in the United States, other countries, or both.Microsoft, Windows, and Windows Vista are trademarks of the Microsoft group of companies.Intel Inside is a trademark of Intel Corporation in the...
Page 60 - Enabling ErP compliance mode
55 User Guide By using ENERGY STAR compliant products and taking advantage of the power-management features of your computer, you reduce the consumption of electricity. Reduced electrical consumption contributes to potential financial sayings, a cleaner environment, and the reduction of greenhouse g...
Page 61 - Electronic emissions notices
56 User Guide In Windows 8 or Windows 8.1 operating system, you also need to disable Fast Startup function to meet the off mode requirement of ErP compliance.To disable the Fast Startup function, do the following:1. Select Apps → Control Panel from the Search charm. 2. From the Control Panel , choos...
Page 62 - Mexico regulatory notice
57 User Guide This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Responsible...