Page 2 - CAUTION - LASER RADIATION WHEN OPEN, DO NOT STARE INTO BEAM.
SAFETY INFORMATION CAUTION: DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/ VIDEO, CD/CD PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPO SURE IF DIRECTED. BE SURE TO OPERATE THE DVD/VIDEO CD/CD PLAYER CORRECTLY AS INSTRUCTED. WHEN THIS DVD/VIDEO CD/CD...
Page 3 - Read all instructions before using
Read all instructions before using • Do not use this product near water. • Do not ceiling- or wall-mount the product. • Install the product in accordance with the operating instructions. • Do not set the product near heat sources, such as radiators, heat registers, stoves, or other apparatus (includ...
Page 4 - Table of contents
3 Table of contents Getting Started: Safety information ........................................................................................................................1-2 Features ..................................................................................................................
Page 5 - Features
Features 7" TFT DISPLAY This player has a built-in 7" TFT display window, to provide clear vision, and low radiation. MULTI TV SYSTEM SUPPORT The player can play discs with signal system of PAL and NTSC. GRAPHICAL USER INTERFACE SCREEN Simply by pressing the OSD button on the remote control ...
Page 6 - Control reference guide; Main unit
Control reference guide Main unit 1. TFT Display window - Displays all information about DVD work scene. 2. UP navigation button - Press this button to move up. 3. OK button - Press this button to confirm a selection. 4. Built-in Speakers. 5. PREV button - Press this button to move left or to skip t...
Page 8 - Connecting to AC power source
Basic connection z Ensure all the cables are disconnected from the main unit before connecting to AC power source by AC power adaptor. z Read through the instructions before connecting other equipment. Connecting to AC power source 7
Page 9 - Connecting to monitor; The slave unit will only work with the main unit by using the car
Connecting to monitor IMPORTANT: The slave unit will only work with the main unit by using the car adaptor. It will NOT work when you use the AC adaptor. 1. Monitor Unit FRONT VIEW 1. STANDBY button - Press it to set the unit in standby mode, press it again to enter work mode. 2. MENU button - Press...
Page 10 - REMOTE CONTROL FOR MONITOR UNIT; Connecting to DVD player
REMOTE CONTROL FOR MONITOR UNIT 9 1. STANDBY button - Press it to set the monitor in standby mode; press it again to set the unit in working mode. 2. MENU button - Press it to enter OSD menu control page. 3. LEFT button - Press it to move left to reduce the level of different OSD item in OSD menu mo...
Page 11 - Connecting to TV set
NOTE: The remote control is also effective to the monitor during playing. z It is recommended to connect a multi-system TV. z Disconnect the AC adaptor before commencing connection. z Do not block ventilation holes of equipment and arrange them so that air can circulate freely. z Read through the in...
Page 13 - Remote control preparation; Battery installation
Remote control preparation Battery installation 12 Insert the batteries while observing the correct (+) and (-) polarities as illustrated at right. Service life of batteries z The batteries normally last for about one year although this depends on how often, and for what operations, the remote contr...
Page 14 - Basic play
Before enjoying DVD/Video CD/CD The on-screen menu language of your player has been factory pre-set to English. If you want to change the menu language to other language, please refer to "Initial settings / General setup / OSD LANGUAGE". In the explanation below it is assumed that English ha...
Page 15 - Fast forward or backward
Stopping play Press the STOP button to stop playing a disc. NOTE: When player is stopped, the player records the point where STOP was pressed (RESUME function). Press the PLAY/PAUSE button again, playback will resume from this point . When the disc door is opened or the STOP button is pressed again,...
Page 16 - MP3 playback
Slow-motion play (DVD/VCD) Press the SLOW button on the remote control 15 during playback. 1) Plays the disc at a 1/2 of normal speed at first. Each time the button is pressed, the play Speed becomes 1/2,1/4,1/8,1/16. 2) Press the PLAY/PAUSE button to resume to normal play. MP3 playback 1. Insert th...
Page 17 - MP4 playback
MP4 playback 1. Insert the disc containing the files in Mp4 format to be played and after a few seconds, the screen of the monitor will show all the folders on the disc: 2. Select the folder you want to play by the navigation buttons and press the ENTER button to confirm. 3. The files in this folder...
Page 18 - JPEG CD
JPEG CD z For JPEG picture CD, select the folder Flipping pictures z Press UP navigation button to flip the picture vertically. z Press DOWN navigation button to flip the picture horizontally. Picture Shrink/Zoom z Press ZOOM button to enter the zoom mode z Press FF button to enlarge picture to 100%...
Page 20 - USB Playback
USB Playback 1. Insert USB containing the files in VCD/SVCD/DVD/MP3/WMA/MP4/JPEG /CD format to be played. 2.Press USB/CARD/DVD button to switch the unit in USB reader mode. Then the screen will display as following: 3. After several seconds, all the folders in the USB will display on monitor screen:...
Page 21 - CARD Playback
CARD Playback 1. Insert the CARD (SD/MMC) containing the files in VCD/SVCD/DVD/MP3/WMA/ MP4/JPEG /CD format to be played. 2. Press USB/CARD/DVD button to switch the unit in CARD reader mode. 3. After several seconds, all the folders in the CARD will display on monitor screen: 4. Select a folder you ...
Page 22 - On screen display Information; Program play
On screen display Information P ress OSD button to display playing information. 21 Program play The player plays the files in an desired order. 1. Press PROGRAM button and the screen will display the program menu. 2. Press navigation buttons to choose memory index and then press ENTER button to star...
Page 24 - ZOOM PLAY
Changing subtitle language (DVD only) 23 It is possible to change the subtitle language to a different language from the one selected at the initial settings. (This operation works only with discs on which multiple subtitle languages are recorded ) 1. Press SUBTITLE button during play, the screen wi...
Page 25 - Initial Settings
Viewing from different angle (DVD only) Some DVDs may contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the ANGLE button. Press ANGLE during play, number of angle being played ...
Page 28 - Definition of terms
27 Definition of terms DVD This refers to a high-density optical disc on which high-quality pictures and sound have been obtained by means of digital signals. Incorporation a new video compression technology (MPEG II) and high-density recording technology, DVD enables aesthetically pleasing full-mot...
Page 29 - Specifications
28 Specifications Power requirements: AC 100 -240V~ 50/60Hz Power consumption (main unit): 9.6W Signal system: NTSC/PAL Resolution:1440 (H) X 234 (V) Dots Distance: 0.107 (H) X 0.372 (V) mm Visible Range: 154.08 (H) X 87.5 (V) mm Discs played: (1) DVD-VIDEO disc 12 cm single-sided,single-layer 12 cm...
Page 30 - Troubleshooting
29 Troubleshooting Before requesting service for this player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or an adjustment on your part may eliminate the problem and restore proper operation. Symptom(Common) Remedy No power. Insert the AC adapto...
Page 31 - DISC handling and maintenance; Region code setting
Troubleshooting (Continued) The password for rating level has been forgotten. Please contact your local sales dealer. Symptom [Video CD] Remedy No menu play. This function works only for Video CDs with playback control. DISC handling and maintenance Handling precautions z Hold the disc by the edges ...
