Page 3 - Table of contents
3 Table of contents Checking the model number ....................................................................................... 2 Table of contents ........................................................................................................ 3 What’s in the box? .......................
Page 8 - Unpacking the device; Cut the tape; What to do with the packaging material
8 Unpacking the device The operations in this chapter should not be performed by children. Get ready: a knife* or a pair of scissors * 1 Cut the tape 2 Open the box 3 Lift the device from the box and remove the foam What to do with the packaging material Lenco recommends to keep the box and foam in ...
Page 9 - Mounting the base
9 Mounting the base The operations in this chapter should not be performed by children. Get ready: Phillips screwdriver* Put the device on a flat, stable surface that is slightly elevated (for instance on a table) so that the base can easily be mounted. Place the base against the bottom of the devic...
Page 10 - Exploring the device; Bluetooth® status LED,
10 Exploring the device The instructions below will briefly explain the functionality of the buttons and controls . A detailed instruction can be found in the various chapters of this manual. 1. Play / pause button, press this button to pause or resume playback. 2. Previous / rewind button, press th...
Page 11 - WARNING
11 14. USB port, insert a USB storage device in this port. WARNING : Do not use a USB extension cable to connect a USB device. The use of a USB extension cable can cause malfunction or loss of data. 15. AUX INPUT, connect a device that is equipped with an AUX output or headphones output to this inpu...
Page 12 - Exploring the remote control
12 Exploring the remote control 1. Function button, press this button to switch between the Bluetooth®, AUX, FM, SD and USB mode. 2. Info button, in the FM mode RDS information is shown on the display. Press this button to show the frequency and PTY information on the display. 3. Sleep button, press...
Page 14 - Mounting the FM wire antenna
14 Mounting the FM wire antenna The operations in this chapter should not be performed by children. The wire antenna can be found on the back of the device. If you cannot find the wire antenna, please check the section Exploring the device (number 16) to see where the wire antenna can be found exact...
Page 15 - Connecting the device to a power supply; Stopping the device in an emergency
15 Connecting the device to a power supply The operations in this chapter should not be performed by children. Before connecting the device to the mains, make sure that the mains voltage corresponds to the voltage that is suitable for the device. The information about a suitable mains voltage can be...
Page 16 - Connecting the device to the mains; power cord to the power outlet.; Make sure; that the batteries are placed in the
16 Connecting the device to the mains Fully extend the power cord and connect the narrow end to the back of the device and connect the wide end of the power cord to the power outlet. Preparing the remote control Remove the battery cover and insert 2 A-brand AAA UM4 1,5V batteries. Make sure that the...
Page 17 - General operation; device will now switch to the standby mode.; Bluetooth® mode
17 General information about the energy saving mode This device is equipped with an energy saving mode. This means that when the device doesn’t receive any signal for 10 minutes (think of: no Bluetooth® connection, song has been paused for a long time, etc.), it switches itself off. Basic operation ...
Page 18 - AUX Mode
18 Put the device in Bluetooth® mode. If the device is in Bluetooth® mode, press the pair button on the device or remote control. When the device is ready to pair with an external Bluetooth® device, the Bluetooth® LED will flash. Find "BTT-2" on the external device and connect with it. Thank...
Page 19 - Connecting an AUX device; FM Radio mode; Manual tuning
19 Connecting an AUX device The AUX input allows you to connect any device that is equipped with an AUX output or a headphones output. The cables that are required to connect these external devices are not included with this product. The AUX input can be found on the back of the device. FM Radio mod...
Page 20 - and decreased by pressing M- on the remote control.; Recalling a preset station; SD Card mode; Put the device in SD Card mode and insert the SD memory card.
20 Searching for a radio station by program type The Program Type function (abbreviated PTY function) allows you to search for a station that is broadcasting a specific genre, for instance classical music. When the PTY function is activated, the search function will stop only at stations that belong...
Page 22 - and all tracks will be played normally.; USB Mode; Put the device in USB mode and insert the USB storage device.; Pausing playback; pause playback, press the button once more to resume playback..; Skipping to the next track; control to skip to the next track.; Searching forward; remote control to skip to the previous track.
22 REP DIR, this is shown on the display when all tracks in the current folder are repeated. This function can only be used when the tracks are stored into 1 or multiple folders. REP ALL, if this is shown on the display, all tracks on the storage media will be repeated. REP OFF, when this is s...
Page 23 - function. This device has various repeat functions:; Advanced; Display information
23 Searching backward During the playback of an audio file, hold the previous button on the device or the remote control. The device will search backward in the track until the button is released. Stopping playback Press the stop button on the device or the remote control to stop playback. Playing t...
Page 24 - disabled when the display shows OFF.; Adjusting the audio setting; button on the remote control to adjust the audio settings.; Resetting the device; Maintenance; Clean the device only with a soft damp cloth.
24 activated and you want to adjust or disable the sleep timer. The sleep timer is disabled when the display shows OFF. Adjusting the audio setting Via the audio settings, it is possible to adjust the high and low tones. Press the TONE button on the remote control to adjust the audio settings. Ate...
Page 25 - Breaking down the device; where this switch can be found.
25 Breaking down the device The operations in this chapter should not be performed by children. Before breaking down the device, make sure the main power switch on the back of the device is in the OFF position. If you have trouble locating this switch, please consult the section Exploring the device...
Page 28 - Storing and transporting the device; unpacking instructions.
28 Storing and transporting the device The operations in this chapter should not be performed by children. Get ready: Wide sturdy tape * and the packaging material as saved according to the unpacking instructions. 1. Insert the foam and lower the device into the box. 2. Close the box shut. 3. Tape t...
Page 29 - led
29 Reorder accessories Spare parts and accessories for this product can be ordered via your dealer or http://lencosupport.zendesk.com. The warranty terms on reordered accessories differ from our general warranty terms. Always inform about the warranty terms before buying accessories to avoid future ...
Page 31 - Troubleshooting; Problem
31 Troubleshooting Problem Solution No power. Check if the plug is inserted firmly into the outlet. Put the main switch on the back of the device in the on position. Make sure the power outlet is powered. To save energy, the device turns itself off if playback has stopped for 10 minutes. No sound or...
Page 32 - Specifications; Random function
32 Specifications Power Supply AC ~ 100-240V, 50/60Hz Power Connection 1,5M euro plug Power Consumption Standby 0.5W During use 90W Operation Temperature -10~+35°C Humidity 5%~90% Maximum elevation above sea level 10,000 meters During storage Temperature -10~+50°C Humidity 5%~90% Maximum elevation a...
Page 33 - Safety Precautions; Explanation of the symbols:
33 Safety Precautions Explanation of the symbols: This symbol indicates that there are important operating maintenance instructions in the user manual accompanying the device This symbol indicates that dangerous voltage is present within this device, constituting a risk of electronic shock or person...
Page 35 - Notice, statements and information; Declaration of Conformity
35 WARNING : Do not use a USB extension cable to connect a USB device. The use of a USB extension cable can cause malfunction or loss of data. Notice, statements and information Lenco is not liable for printing errors in the manual. Declaration of Conformity Products with a CE marking comply with th...
Page 36 - Service and support; Germany
36 Service and support For information: www.lenco.com For support: http://lencosupport.zendesk.com Lenco helpdesk: Germany 0900-1520530 (Local charges) The Netherlands 0900-23553626 (Local charges + 1ct p/min) Belgium 02-6200115 (Local charges) France 0333-81484280 (Local charges) France (email) sav...
Page 37 - Lenco and the Lenco logo are trademarks of STL Group BV
37 Do not distribute copyrighted material Do not distribute copyrighted material without the permission of the owners. By doing this you risk violation of copyright laws. The manufacturer is not liable for any legal issues caused by illegal use of copyrighted material by the user. Trademarks Lenco a...
Page 38 - Disclaimer
38 Disclaimer Some content and services accessible through this device belong to third parties and are protected by copyright, patent-, trademark- and/or other intellectual property laws. Such content and services are solely provided for your personal and non-commercial use. You may not use any cont...
