LEM 1185 - User Manual
LEM 1185 Food Slicer – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAVE THESE INSTRUCTIONS
- Page 3 – LEM suggests run times of 1 hour or less with 30 minute cooling time.; WARNING! SHARP BLADE; HANDLE CAREFULLY! KEEP FINGERS AWAY FROM THE CUTTING BLADE!; CLEANING AND MAINTENANCE; procedures described within this instruction manual.; CAUTION; motor is OFF and the plug is removed from the outlet/power source.
- Page 4 – If the sharpener is not mounted proceed as follows:; To sharpen the Blade:; Replace the Blade when it becomes 10mm or thinner.; SLICER FEATURES
USE & MAINTENANCE
1185
L E M P r o d u c t s • W e s t C h e s t e r , O H 4 5 0 1 1 • 1 - 8 7 7 - 5 3 6 - 7 7 6 3 • l e m p r o d u c t s . c o m
L E M P r o d u c t s • W e s t C h e s t e r , O H 4 5 0 1 1 • P H : 1 - 8 7 7 - 5 3 6 - 7 7 6 3 • l e m p r o d u c t s . c o m
T H E L E A D E R I N G A M E P R O C E S S I N G
2YEAR
WARRANTY
8 ½"
professional
slicer
CAUTION
Cuts, injuries and/or fire may result from non-compliance with all operating
procedures described within this instruction manual.
WARNING! SHARP BLADE
HANDLE CAREFULLY! KEEP FINGERS AWAY FROM THE CUTTING BLADE!
NEVER FEED FOOD BY HAND! ALWAYS USE THE FOOD HOLDER!
Always use completely assembled meat slicer with sliding food tray and food
holder. Protective/cut resistant gloves are recommended whenever handling blade!
ATTENTION:
If any components of this unit are broken,
or if the unit does not operate properly,
please contact LEM Products at
1-877-536-7763
For more great products or a free catalog
log onto www.lemproducts.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CAUTION Before using the slicer for the first time please make sure to read carefully and thoroughly through these operating instructions and the safety advice. Familiarize yourself completely with the functions of the appliance. GENERAL WARNINGS AND SAFETY INFORMATION 1. Always ensure that the slic...
Before first use Carefully remove slicer from packaging and keep all packaging material together. Clean the slicer before use. (Refer to the section “Cleaning and Maintenance”). Setting up the slicer 1. Never set the slicer on a hot surface or near an open flame.2. Make sure the power cord does not ...
If the sharpener is not mounted proceed as follows: 1. Place the sharpener in its support 2. Tighten the safety screw Should the Blade become dull it will be necessary to sharpen it. This slicer comes equipped with built-in sharpener. Note: The Blade is highly resistant to wear. With normal use it s...
