La Crosse Technology 308-2316 - Manual

Model: 308-2316 www.lacrossetechnology.com/support Page | 6 Mount on a Flat Surface: 1. Firmly place the bottom of the thermo-hygro sensor into the plastic mounting bracket. Use a short bolt and nut to secure in place. Do not over tighten. 2. Check the wind and rain cord are secured to the correct p...

Model: 308-2316 www.lacrossetechnology.com/support Page | 7 Outdoor Reception Icon  When the outdoor sensors update, about every 48 seconds, the sensor reception icon will flash briefly. Backlight  When any button is pressed, the LED lights will come on for 5 seconds. LCD Screen 1. Time 2. Alarm o...

Model: 308-2316 www.lacrossetechnology.com/support Page | 9 12/24 Hour Time Format 7. 12H will flash and the letters HUR will show in the upper right corner. 8. Press + or MIN/MAX button to select either 12 hour (AM/PM) or 24 hour time (24:00) format. 9. Press the SET button to confirm selection and...

Model: 308-2316 www.lacrossetechnology.com/support Page | 10 Pressure Sensitivity Settings: 2, 3, or 4 Pressure sensitivity settings are changed when your forecast icons do not seem to be changing properly after the weather station has been set up for a week. People who live near large bodies of wat...

Model: 308-2316 www.lacrossetechnology.com/support Page | 11 Relative or Absolute Pressure display 3. Press and release the SET button twice. The Pressure Number will flash. 4. Press the + or MIN/MAX buttons to select Relative or Absolute Pressure. Wind Speed or Wind Gust display 5. Press and releas...

Model: 308-2316 www.lacrossetechnology.com/support Page | 12 Reset Current Rainfall Readings Use the Quick Display Mode to reset all the current rainfall readings to zero (1hr, 24hr, weekly, monthly, total). 1. Press and release the SET button four times. The Rain number will flash. 2. Press the + o...

Model: 308-2316 www.lacrossetechnology.com/support Page | 13 High Alarms 1. Press the ALARM button once to enter HI Alarm mode ( HIAL will show in the date display). Press the SET button to select the Time Alarm . The Hour will flash. 2. Press the + or MIN/MAX buttons to adjust the hour. 3. Press th...

Model: 308-2316 www.lacrossetechnology.com/support Page | 14 39.Press the ALARM button to exit alarm settings. Note: There is only one time alarm. Set the time alarm in the high or low alarm setting mode. Low Alarms: 1. Press the ALARM button once to enter HI Alarm mode ( LOAL will show in the date ...

Model: 308-2316 www.lacrossetechnology.com/support Page | 15  The alarm will flash until the weather condition is no longer valid. The alarm will flash even when sound is silenced.  When the alarm threshold is met, the alarm will reactivate automatically.  Deactivate the alarm or set it to a new ...

Model: 308-2316 www.lacrossetechnology.com/support Page | 16 6. Press the + button to view outdoor humidity maximum value with time and date stamp. 7. With the value flashing, press the SET button to reset the record to current value date and time. 8. Press the + button to view outdoor temperature m...

Model: 308-2316 www.lacrossetechnology.com/support Page | 17 2. Press the + button to view indoor humidity minimum value with time and date stamp. 3. With the value flashing, press the SET button to reset the record to current value date and time. 4. Press the + button to view indoor temperature min...

Model: 308-2316 www.lacrossetechnology.com/support Page | 18 Pressure Sensitivity Setting Pressure sensitivity settings are changed when your forecast icons do not seem to be changing properly after the weather station has been set up for a week. People who live near large bodies of water or in the ...

Model: 308-2316 www.lacrossetechnology.com/support Page | 19 The NIST radio station, WWVB, is located in Ft. Collins, Colorado and transmits the exact time signal continuously throughout the United States at 60 kHz. The signal can be received up to 2,000 miles away through the internal antenna in th...

Model: 308-2316 www.lacrossetechnology.com/support Page | 20 Care and Maintenance  Do not mix old and new batteries  Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries  Always purchase the correct size and grade of battery most suitable for the intended use.  Replace all batteries ...

Model: 308-2316 www.lacrossetechnology.com/support Page | 21 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in...