Kustom DE50 - Manual
Kustom DE50 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – FCC Statements; • Reorient or relocate the receiving antenna.
- Page 6 – disconnected when this jack is used.
- Page 7 – AC power cord can be removed for easy storage and replacement
- Page 11 – NOTES
OWNER’S MANUAL
Congratulations
on the purchase of your new Kustom® Deep End® Series bass amplifier. This model
utilizes an exclusive preamp design that combines a 12AX7 tube, known for its robust tonal qualities,
with solid-state circuitry that provides consistency of performance and reliability. The result is rich,
dynamic tone that is perfect for a wide variety of playing styles and environments. Inside this manual
you’ll find details about your Deep End® Series model. Everyone at Kustom wishes you many years of
enjoyment with your new amplifier!
kustom.com
DE50
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FCC Statements 1. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant...
1.) External Speaker - this is a 2-conductor, 1/4-inch speaker output jack. Rating is 8 Ohms minimum. For full power, use an 8-Ohm speaker load. Higher impedance loads will result in lower power levels to the speaker. The signal path to the internal speaker is disconnected when using this jack. 2.) ...
1.) AC Power Cord Receptacle - AC power cord can be removed for easy storage and replacement if damaged. Insert the AC cord (provided) firmly into the AC receptacle. NOTE: Replace the AC power cord if protective jacket is damaged or ground pin is damaged or removed. 2.) Fuse - The fuse is located in...
