Krell RC-5 - Manual

Krell RC-5

Krell RC-5 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 2 – Home Theater Standard 7.1
  • Page 3 – Overview; on page 4
  • Page 4 – Connecting to the RS-232 Port
  • Page 5 – RS-232 Commands for the Home Theater Standard 7.1; COMMAND
  • Page 6 – continued; Works on current; Note
  • Page 9 – * Refer to the list of audio decode modes and corresponding codes
  • Page 10 – AUDIO DECODE MODE
  • Page 11 – 600 Baud 8 Data Bits 1 Stop Bit No Parity; Word 1: Start of Message; Word 2: General Status I; The values marked
  • Page 12 – Word 6: Zone 2 Volume
  • Page 13 – Word 9: Zone 2 Audio Input; Word 10: Loudspeakers / Current Audio Stream
  • Page 16 – Word 15: Surround Trim
  • Page 17 – Word 18: End of Message
  • Page 19 – **The SET MODE command allows the user to set a specific audio
Loading the manual

Home Theater

Standard 7.1

Surround

Preamp/Processor

Developer’s Reference

THE LEADER IN AUDIO ENGINEERING

RS-232 Port: Sending Commands
and Interpreting Data

RC-5 Remote: Commands

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Home Theater Standard 7.1

© 2002 by Krell Industries, Inc. All rights reserved P/N 306016 This product is manufactured in the United States of America. Krell ® is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents.All other trademarks...

Page 3 - Overview; on page 4

Overview This document is designed for application developers who want to control the Home Theater Standard 7.1 using an external computer-based device. The document contains five sections: 1 Connecting to the RS-232 Port, including theRS-232 connector diagram, and RS-232 Port Protocols, on page 4 2...

Page 4 - Connecting to the RS-232 Port

4 Krell Home Theater Standard 7.1 Developer’s Reference Connecting to the RS-232 Port A 9-pin RS-232 port is located on the right-hand side of the HomeTheater Standard 7.1 back panel. Make sure the clamping screws(or thumbscrews) securely fasten the connection cable from theexternal computer-based d...

Other Krell Models

All Krell Other