Kohler KT6910 - Manual
Kohler KT6910 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Observe all local plumbing and building codes.; Thermometer
- Page 3 – Spout
- Page 4 – Install the Showerhead; Shower Elbow
- Page 5 – Water Temperature Adjustment; minor water temperature changes
- Page 6 – Install the Faceplate and Handle
- Page 7 – Guide d’installation; Baignoire; Outils et matériels; ATTENTION: Risque d’endommagement du produit.; Les; Thermomètre
- Page 8 – Bec
- Page 9 – Installer la pomme de douche; Coude de douche
- Page 10 – Réglage de la température d’eau; ATTENTION: Risque de blessures corporelles.
- Page 11 – Installer le couvercle et la poignée; Retirer et jeter le renfort en plâtre et/ou dôme, s’il est installé.
- Page 12 – Guía de instalación; Herramientas y materiales; Los tornillos; Termómetro
- Page 13 – Instale el surtidor; Retire el niple provisional.; Niple
- Page 14 – Instale la cabeza de ducha; Codo de ducha
- Page 15 – Ajuste de la temperatura del agua; PRECAUCIÓN: Riesgo de lesiones personales.; Para eliminar; cambios menores de la temperatura del agua; tornillo de fijación y vuelva a verificar la temperatura del agua.; cambios mayores de la temperatura del agua; Vuelva a verificar la temperatura del agua.; Arosello
- Page 16 – Instale la placa frontal y la manija; Encaje la manga en la válvula.
- Page 17 – CC
Installation Guide
Single-Control Bath and Shower Trim
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page“ Français-1”
Español, página“ Español-1”
K-T6908
K-T6910
K-T6913
114487-2-CC
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Before You Begin CAUTION: Risk of product damage. Long screws, for installing trim, can damage the K-2971-KS valve. When usingthis valve and trim in a fiberglass or acrylic installation, usethe 88526 Thin Wall Installation Kit. Observe all local plumbing and building codes. The f...
1. Install the Spout Remove the temporary nipple. Apply thread sealant and install a 1/2 ″ nipple so it extends 7/16 ″ (1.1 cm) beyond the finished wall. Apply a bead of plumbers putty or other sealant around the inletend of the spout according to the manufacturer’s instructions. Apply thread sealan...
2. Install the Showerhead NOTICE: Do not use thread sealant compound (pipe dope) on the shower arm threads. Instead, use thread sealant tape on the showerarm threads. This will avoid clogging the showerhead spray outlets. Remove the temporary nipple from the shower elbow. Apply a bead of plumbers pu...
