Kohler K-T16176-4-BN- Installation Manual
Kohler K-T16176-4-BN– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Shut off the main water supply.; Screwdrivers
- Page 3 – Install the Valve Stem Adapter; For a standard wall -
- Page 4 – Do not
- Page 5 – Adjust the Handle Assembly; Remove the handle assembly and set aside.; Valve Stem Adapter; Volume Control Valve
- Page 8 – If the handle does not engage the valve or the escutcheon
- Page 10 – The volume control handle should be at the 12 o’clock
- Page 11 – Guide d’installation; Garniture de valve thermostatique compacte; Outils et matériels; Couper l’alimentation d’eau principale.; Tournevis
- Page 13 – Installer l’adaptateur de la tige de valve; Pour un mur standard -
- Page 14 – Ne pas complètement presser ou visser les
- Page 15 – Ajuster l’ensemble de poignée; Retirer l’ensemble de la poignée et mettre de côté.; Adaptateur de tige de robinet; Robinet de contrôle de volume
- Page 17 – Installer la garniture; Si la garniture K-T10422 est installée, procéder à la
- Page 18 – Si la poignée ne s’engage pas dans la valve ou que
- Page 20 – La poignée du contrôle de volume devrait être en
- Page 21 – Guía de instalación; Herramientas y materiales; Cierre el suministro principal de agua.; Destornilladores
- Page 23 – Instale el adaptador de la espiga de la válvula; Para una pared delgada -
- Page 24 – Retire el protector de yeso de la válvula y deséchelo.; No presione completamente o no
- Page 25 – Ajuste el montaje de la manija; Quite el montaje de la manija y colóquelo a un lado.; Adaptador de la espiga de la válvula; Válvula de control de caudal
- Page 27 – Instale la guarnición; Si va a instalar la guarnición K-T10422, continúe en la
- Page 28 – Si la manija no engrana con la válvula o el chapetón no se
- Page 30 – La manija con control de caudal debe quedar en posición
Installation Guide
Stacked Thermostatic Valve Trim
K-T10183, K-10302, K-10422,
K-10427, K-T10594, K-10941,
K-14489, K-16176
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345
M
)
Français, page “Français-1”
Español, página “Español-1”
1041504-2-F
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Thank You For Choosing Kohler Company Thank you for choosing Kohler Company. Your Kohler Companyproduct reflects the true passion for design, craftsmanship, artistry, andinnovation Kohler Company stands for. We are confident itsdependability and beauty will surpass your highest e...
1. Install the Valve Stem Adapter IMPORTANT! Two screws of each length are supplied for this step, one metric and one standard. If the screw you are using is difficultto thread into the opening, remove it and use the other screw. NOTE: Check the finished wall surface as related to the graphics on th...
Install the Valve Stem Adapter (cont.) Place the spline adapters over the valve stems. Set the correct valve stem adapters over each valve stem. Do not completely press or screw the valve stem adapters into placeuntil instructed to do so. 1041504-2-F 4 Kohler Co.
