Kohler K-T154-3-BN- Installation Manual
Kohler K-T154-3-BN– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Install the Handles
- Page 5 – Complete the Installation; Spout
- Page 6 – Guide d’installation; Outils et matériels
- Page 7 – Bec
- Page 8 – Installer les poignées
- Page 9 – Compléter l’installation
- Page 10 – Guía de instalación; Guarnición de grifería mural de lavabo; Herramientas y materiales
- Page 11 – Instale el surtidor; Surtidor
- Page 12 – Instale las manijas
- Page 13 – Termine la instalación
Installation Guide
Wall-Mount Lavatory Faucet Trim
M
product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345M)
Français, page “Français-1”
Español, página “Español-1”
K-T154
1031911-2-A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2. Install the Handles Determine the thickness of the finished wall. If the finished wall is less than 5/8 ″ (1.6 cm) thick, use the supplied hardware kit numbered 1031092. If the finished wall is 5/8 ″ (1.6 cm) to 1-1/4 ″ (3.2 cm) thick, use the supplied hardware kit numbered 1031091. Place a stem ...
3. Complete the Installation Ensure that both faucet handles are turned off (hot =counterclockwise to close, cold = clockwise to close). Turn on the water supplies and check the installation for leaks. Repair as needed. Remove the aerator. Open the valves and run water through the spout for about am...
Guide d’installation Garniture de robinet de lavabo à montagemural Outils et matériels Merci d’avoir choisi la compagnie Kohler Nous apprécions votre engagement envers la qualité Kohler. Veuillezprendre s’il vous plaît quelques minutes pour lire ce manuel avant decommencer l’installation. Ne pas hés...