Kohler K-9621-CP- Installation Manual
Kohler K-9621-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
BA
All information in these instructions is based on the
latest product information available at the time of
publication. Kohler Co. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
DO NOT INSTALL GRIP RAILS UNTIL ALL
CONSTRUCTION IS COMPLETE.
INSTALLATION:
1.
Slip metal washers over bolts as shown. Thread the bolts
half way into the anchor nuts pre-installed on the tub.
2.
Place the appropriately-shaped gaskets over the bolts.
3.
Position the grip rail so that slots line up with bolts. Be sure
grip rail is placed between gasket and metal washer.
4.
Position the gaskets to match contour of grip rail. Tighten
the bolts evenly to secure grip rail making sure gaskets are
in line with grip rail.
5.
Very carefully trim excess gasket material from around grip
rail with a razor blade.
6.
Repeat procedure for other grip rail.
HAND GRIP RAILS
Copyright
1997 Kohler Co.
K-9616
K-9596
K-9620
Bolt
Metal Washer
Grip Rail
Gasket
Bolt
Metal Washer
Grip Rail
Gasket
Bolt
Metal Washer
Grip Rail
Gasket
K-9621
K-9623
Grip Rail
Metal
Washer
Gasket
Bolt
Bolt
Metal Washer
Grip Rail
Gasket
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
