Kohler K-9033-CP- Installation Manual
Kohler K-9033-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Thank You For Choosing Kohler Company; Merci d’avoir choisi la compagnie Kohler; Gracias por elegir los productos Kohler
- Page 4 – Assemble; Assembler
- Page 5 – Ensamble; Connect; Flange
- Page 6 – Connecter; Conecte
- Page 8 – Cuidado y limpieza; Remove Debris
- Page 9 – ONE-YEAR LIMITED WARRANTY; Use of in-tank toilet cleaners will void the warranty.; This is Kohler Co.’s exclusive written warranty.; Garantie limitée d’un an; GARANTIE LIMITÉE D’UN AN; L’utilisation de
- Page 10 – Ceci constitue la garantie écrite exclusive de Kohler Co.; Garantía limitada de un año; GARANTÍA LIMITADA DE UN AÑO
- Page 11 – Service Parts/Pièces de rechange/Piezas de repuesto; **Vous devez spécifier les codes de la finition et/ou de la couleur
Installation and Care Guide
Guide d’installation et d’entretien
Guía de instalación y cuidado
Contemporary Round Bottle Trap
Siphon en bouteille rond contemporain
Trampa de botella redonda contemporánea
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (Ej. K-12345
M
)
USA/Canada: 1-800-4KOHLER
México: 001-877-680-1310
kohler.com
©2009 Kohler Co.
K-9033
1108185-2-A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Thank You For Choosing Kohler Company Thank you for choosing Kohler Company. Your Kohler Company product reflects the true passion for design, craftsmanship, artistry, and innovation Kohler Company stands for. We are confident its dependability and beauty will surpass your highest expectations, sati...
1. Assemble Install the pop-up drain to the lavatory according to the manufacturer’s instructions.Remove the inlet nut from the bottle trap body. Ensure the O-ring is inside the inlet nut. NOTICE: To ensure a proper compression fit, the tailpiece must be inserted at least 1” (2.5 cm) inside the inle...
Assembler (cont.) Placer le corps du siphon en bouteille autour de l’about, puis serrer à la main l’écrou d’entrée jusqu’à être contre le corps du siphon de bouteille. Si nécessaire, utiliser une clé à sangle propre pour assistance. Ensamble Instale el desagüe automático en el lavabo conforme a las ...
