Kohler K-9018-PB- Installation Manual
Kohler K-9018-PB– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
114233-2-
AA
(9626)
Copyright
1997 Kohler Co.
DRAIN SHROUD AND P-TRAPS
BEFORE YOU BEGIN
HOW TO USE THESE INSTRUCTIONS
NOTES
Drain shroud conceals drain for console tables.
Shut off the main water supply.
Observe all local plumbing codes.
REQUIRED TOOLS AND MATERIALS
Adjustable or open end wrench
Strap wrench
DRAIN SHROUD INSTALLATION
Install pop-up drain per manufactures instructions.
Slide drain shroud with slot facing toward the back, up
over tailpiece and around ball lever rod, until contact with
locknut on pop-up drain.
At this point, p-trap must be installed to hold drain shroud
in position.
Tailpiece
Drain Shroud
Slot
Ball Lever Rod
P-TRAP INSTALLATIONS
K-9018 with 1-1/4” O.D. inlet, and 1-1/4” O.D. outlet.
Intended for console table installations.
Insert tube into drain outlet and connect with nut and
gasket (not supplied). Slide flange back to wall, to cover
the drain outlet.
Place trap nut and gasket onto tailpiece. Slide trap over
tailpiece and tube elbow. Tailpiece must extend 1” to 2”
into trap. Tailpiece may have to be cut to fit. Tighten nuts
and gaskets.
Cleanout plug is used to remove any debris which has
fallen into the trap.
Tailpiece
Trap
Nut
Gasket
Nut
Gasket
Flange
Tube
Drain
Outlet
Cleanout Plug
Tube
Elbow
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
