Kohler K-7307-K-CP- Installation Manual

Kohler K-7307-K-CP

Kohler K-7307-K-CP– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4
Loading the manual

116570-2-

AA

(B)

1999 Kohler Co.

BEFORE YOU BEGIN

NOTES

Shut off the main water supply.

Inspect the supply tubing for damage. Replace
as necessary.

Observe local plumbing codes.

If possible, install this faucet before installing the
lavatory.

Kohler Co. reserves the right to make
revisions in the design of faucets
without notice, as specified in the Price
Book.

TOOLS AND MATERIALS RECOMMENDED

Adjustable wrench

Thread sealant

Plumbers putty

Hacksaw or tubing cutter

Pipe wrench

Channel lock pliers

INSTALLATION

FAUCET

Apply a ring of plumbers putty or other sealant to
the underside of the spout according to the putty
manufacturer’s instructions. Fit the spout
through the center lavatory hole.

Install the metal washer and nut, and securely
wrench tighten the nut.

Remove any excess putty or sealant.

Thread the shank nut about halfway up the spout
shank.

Nut

Apply Plumbers
Putty

Metal
Washer

Shank Nut

Remove and retain the guide tube nut and
O-ring from the supply tee.

Insert the plastic gasket and rubber washer into
the supply tee. Slide the metal washer on the
spout shank, and thread the supply tee to the
spout shank until hand tight.

Align the supply arms to the sides, and carefully
wrench tighten the hex end of the supply tee.

Thread the shank nut down against the supply
tee, and securely wrench tighten.

Slide a compression nut and ferrule onto each
supply arm.

Slip the O-ring over the guide tube, and wrench
tighten the guide tube nut to the supply tee.

Supply Tee

Spout Shank

O-Ring

Plastic Gasket

Guide
Tube Nut

Tee Hex-End

Rubber Washer

Metal Washer

Supply Inlet

Shank Nut

Guide Tube

Compression
Nut

Ferrule

WIDESPREAD

LAVATORY

FAUCETS

INSTALLATION
INSTRUCTIONS

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Kohler Models

All Kohler Other