Kohler K-6353 - Manual
Kohler K-6353 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Observe all local plumbing codes and building codes.; Tube Cutter
- Page 3 – Install the Mounting Stud; Disconnect the hose from the hose connector.; For installation on marble, do not use plumbers putty. Use; Insert the faucet tubing and hose into the hole.; For 3–hole Installations:; Insert the O-ring into the groove in the spacer.; Spacer
- Page 4 – Faucet Installation; The weight must be installed to act as a pull stop and to; Install the Supplies; Do not remove the ground; Hot
- Page 6 – Installation Checkout; Ensure that all coupling nuts are tight.
- Page 7 – Water Temperature Adjustments; Prior to adjustment, make sure the handle is in the
Installation Guide
Single-Control Kitchen Sink Faucets
M
product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345M)
Français, page“ Français-1”
Español, página“ Español-1”
K-6352
K-6353
1025494-2-B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a fewminutes to review this manual before you start installation. If youencounter any installation or performance problems, please don’thesitate to contact us. Our phone numbers and...
1. Install the Mounting Stud Disconnect the hose from the hose connector. Screw the mounting stud into the threaded hole at the bottom ofthe faucet body. The mounting stud should extend slightlybeyond the threaded hole in the body. 1. Install the Escutcheon (Optional) NOTE: For installation on marbl...
1. Faucet Installation From the underside of the sink, position the bracket, washer andnut onto the mounting stud. Position the faucet and escutcheon on the sink to obtain thedesired alignment. Tighten the nut securing the faucet to the sink. For best access,use a socket wrench with a 7/16” deep soc...
