Kohler K-4737-96- Installation Manual
Kohler K-4737-96– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Do not immerse or flush
- Page 3 – Prepare Electrical Connections; This product is factory equipped with a specific electrical; Preferred Connection; Temporary Connection; Grounding Pin
- Page 4 – Unless the outlet cover screw is grounded through the; Prepare the Toilet; If applicable, remove the existing toilet seat.
- Page 5 – Install the Mounting Plate; Inspect the toilet mounting holes for threaded inserts.; For Toilets with Threaded Inserts; For All Other Installations; Position the mounting plate over the mounting holes on the bowl.; Bolt; Threaded Inserts
- Page 8 – Complete the Installation; Thick Hose
- Page 9 – Installation Checkout; Proceed to the; Power Button
- Page 10 – Guide d’installation; et chauffe-eau de réservoir; Outils et matériaux; Clé à molette
- Page 12 – Préparer les connexions électriques; Ce produit doit être mis à la; Connexion préférable; Connexion temporaire
- Page 13 – À moins que la vis du couvercle de la prise ne soit mise à la
- Page 14 – Installer la plaque de fixation; Inspecter les orifices de fixation des W.C. afin d’y; Pour toutes les autres installations; Insertions filetées
- Page 16 – Installer le siège; Pour toutes les installations
- Page 17 – Terminer l’installation; AVERTISSEMENT: Risque de dommages matériels.
- Page 18 – Inspection de l’installation; Aller aux sections; Bouton de marche
- Page 19 – Guía de instalación; Asiento de inodoro con funcionalidad de bidet; y calentador de agua del tanque; Herramientas y materiales; ADVERTENCIA: Riesgo de sacudida eléctrica.
- Page 21 – Prepare las conexiones eléctricas; Este producto se tiene que conectar a; Conexión de preferencia; Conexión provisional
- Page 22 – utilice un cable de extensión.; A menos que el tornillo de la tapa del tomacorrientes tenga; Prepare el inodoro; Si aplica, retire el asiento existente del inodoro.
- Page 23 – Instale la placa de montaje; Inspeccione los orificios de fijación del inodoro para; Para inodoros con insertos roscados; Insertos roscados
- Page 25 – Instale el asiento; Para todas las instalaciones
- Page 26 – Termine la instalación; ADVERTENCIA: Riesgo de daños a la propiedad.; Tenga cuidado para evitar dañar las roscas o apretar; Manguera gruesa
- Page 27 – Verificación de la instalación; Proceda a las secciones; Botón de encendido
Installation Guide
Toilet Seat with Bidet Functionality
and Tank Water Heater
M
product numbers are for Mexico (i.e. K-12345
M
)
Los números de productos seguidos de
M
corresponden a México (e.j.
K-12345
M
)
Français, page “Français-1”
Español, pagina “Español-1”
K-4737
1097712-2-B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Tools and Materials Before You Begin WARNING: Risk of electric shock, fire, or personal injury. This product must be grounded and connected only to adedicated, nominal 120 VAC, 60 Hz circuit protected by aminimum 15 A Ground-Fault Circuit-Interrupter (GFCI) orResidual Current Device (RCD). WARNING: ...
1. Prepare Electrical Connections WARNING: Risk of electric shock, fire, or personal injury. This product must be grounded and connected only to adedicated, nominal 120 VAC, 60 Hz circuit protected by aminimum 15 A Ground-Fault Circuit-Interrupter (GFCI) orResidual Current Device (RCD). NOTICE: This...
Prepare Electrical Connections (cont.) Route the electrical wires, then install and ground the electricaloutlet. This electrical outlet must be a dedicated, nominal 120VAC, 60 Hz circuit protected by a minimum 15 A Ground-FaultCircuit-Interrupter (GFCI) or Residual Current Device (RCD). Donot plug t...
