Kohler K-360-BN- Installation Manual
Kohler K-360-BN– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Mark and Drill the Pilot Holes
- Page 5 – Anchor Installation; Wall Plate Installation
- Page 6 – Install the Tissue Holder
- Page 7 – Install the Towel Bar
- Page 9 – Install the Glass Shelf
- Page 10 – Guide d’Installation; FinialTM; Accessoires; Outils et matériaux
- Page 12 – Information du diagramme de raccordement
- Page 14 – Installation des dispositifs d’ancrage; Installation de la plaque murale
- Page 16 – Installer le support de papier de toilette
- Page 19 – Installer l’étagère de verre
- Page 20 – Guía de Instalación; Accesorios; Herramientas y materiales
- Page 22 – Diagrama de instalación
- Page 23 – Prepare el sitio — Placa mural; Marque y perfore los orificios de guía
- Page 24 – Instalación de los sujetadores; Instalación de la placa mural
- Page 25 – Instale el portapapel higiénico
- Page 26 – Instale la barra para toallas
- Page 28 – Instale el anaquel de vidrio
Installation Guide
Finial™
Accessories
K-318, K-319, K-322,
K-323, K-360, K-361,
K-362, K-363, K-364,
K-365, K-618, K-619,
K-622, K-623
M
product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M
corresponden a México (Ej.
K-12345M)
Français, page “Français-1”
Español, página “Español-1”
1020818-2-A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2. Prepare the Site — Wall Plate(s) Determine the desired mounting location. Mark the vertical and horizontal center lines for the accessory to beinstalled. Consult the roughing-in diagrams to determine thedimensions. When installing multiple-post accessories, provide the requireddistance between th...
4. Anchor Installation NOTE: You may need to disassemble some of the accessories. Some accessories will be packed with the wall plate installed in the post.Loosen the setscrew and remove the wall plate if needed. Press and hold the legs of a wall anchor (provided) together andinsert the wall anchor ...
6. Install the Tissue Holder Start a setscrew into each post. Do not thread fully into the posts. Position the escutcheons, if included, onto the wall plates. NOTE: The escutcheons are loose until the posts are in place and the setscrews are tightened. Install the tissue holder posts onto the wall p...